Download or read book Reliability and Risk Assessment written by John D. Andrews and published by Longman Scientific and Technical. This book was released on 1993 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents at process plants such as Windscale, Piper Alpha and Chernobyl have created worldwide concern over the risks involved in operating hazardous plant. Thorough procedures for the assessment and reliability testing of safety systems are now in great demand. Reliability and Risk Assessment provides a full theoretical background to the techniques used in this field of engineering and discusses how these methods are applied in practice. The authors show how these methods can be used to improve not only the safety records, but also the efficiency, productivity and profitability, of processing plants. Reliability and Risk Assessment is intended primarily as a reference for professional engineers, but will also prove invaluable for postgraduate students involved in reliability and risk assessment research.
Download or read book An Introduction to the Basics of Reliability and Risk Analysis written by Enrico Zio and published by World Scientific. This book was released on 2007 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: The necessity of expertise for tackling the complicated and multidisciplinary issues of safety and risk has slowly permeated into all engineering applications so that risk analysis and management has gained a relevant role, both as a tool in support of plant design and as an indispensable means for emergency planning in accidental situations. This entails the acquisition of appropriate reliability modeling and risk analysis tools to complement the basic and specific engineering knowledge for the technological area of application.Aimed at providing an organic view of the subject, this book provides an introduction to the principal concepts and issues related to the safety of modern industrial activities. It also illustrates the classical techniques for reliability analysis and risk assessment used in current practice.
Download or read book Reliability and Risk Analysis written by Terje Aven and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of reliability and risk is an important and integral part of planning, construction and operation of all technical systems. To be able to perform such analyses systematically and scientifically, there is usually a need for special methods and models. This book presents the most important of these. Particular emphasis has been placed on the ideas and the motivation for the use of the various methods and models. It has been an objective to compile a book which provides practising engineers and engineering graduates with the concepts and basic techniques for evaluating reliability and risk. It is hoped that the material presented will make them so familiar with the subject that they can carry out various types of analyses themselves and understand and make use of the more detailed applications and additional material which is available in the journals and publications associated with their own discipline. It has also been an objective to put reliability and risk analyses in context - how such analyses should be used in design and operation of components and systems. The material presented is modern and a large part of the book is at research level. The book focuses on analysis of repairable systems, not only non-repairable systems which have traditionally been given most attention in textbooks on reliability theory. Since most real-life systems are repairable, methods for analysing repairable systems are an important area of research. The book presents general methods, with most applications taken from offshore petro leum activities.
Download or read book Systems Reliability and Risk Analysis written by E.G. Frankel and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ernst G. Frankel This book has its origin in lecture notes developed over several years for use in a course in Systems Reliability for engineers concerned with the design of physical systems such as civil structures, power plants, and transport vehicles of all types. Increasing public concern with the reliability o~ systems for reasons of human safety, environmental protection, and acceptable ir. vestment risk limitations has resulted in an increasing interest by engineers in the formal applica~i0n of reliability theory to e~gineering desian. At the same time there is a demand for more effective approaches to the des~gn of procedures for the operation and use of man-made syste~s and more meaningful assessment of the risks intr)duction and use of such a system poses both when operating as designed and when operating at below design performance. The purpose of the book is to provide a sound, yet practical, introduction to reliability analysis and risk assessment which can be used by professionals in engineering, planning, management, and economics to improve the design, operation, and risk assessment of systems of interest. The text should be useful for students in many disciplines and is designed for fourth~year undergraduates or first-year graduate students. I would like to acknowledge the help of many of my graduate students who contributed to the development of this book by offering comments and criticism. Similarly I would like to thank Mrs.
Download or read book Reliability Engineering and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2016-11-25 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This undergraduate and graduate textbook provides a practical and comprehensive overview of reliability and risk analysis techniques. Written for engineering students and practicing engineers, the book is multi-disciplinary in scope. The new edition has new topics in classical confidence interval estimation; Bayesian uncertainty analysis; models for physics-of-failure approach to life estimation; extended discussions on the generalized renewal process and optimal maintenance; and further modifications, updates, and discussions. The book includes examples to clarify technical subjects and many end of chapter exercises. PowerPoint slides and a Solutions Manual are also available.
Download or read book Risk Based Reliability Analysis and Generic Principles for Risk Reduction written by Michael T. Todinov and published by Elsevier. This book was released on 2006-11-03 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with the intention to fill two big gaps in the reliability and risk literature: the risk-based reliability analysis as a powerful alternative to the traditional reliability analysis and the generic principles for reducing technical risk. An important theme in the book is the generic principles and techniques for reducing technical risk. These have been classified into three major categories: preventive (reducing the likelihood of failure), protective (reducing the consequences from failure) and dual (reducing both, the likelihood and the consequences from failure). Many of these principles (for example: avoiding clustering of events, deliberately introducing weak links, reducing sensitivity, introducing changes with opposite sign, etc.) are discussed in the reliability literature for the first time. Significant space has been allocated to component reliability. In the last chapter of the book, several applications are discussed of a powerful equation which constitutes the core of a new theory of locally initiated component failure by flaws whose number is a random variable. - Offers a shift in the existing paradigm for conducting reliability analyses - Covers risk-based reliability analysis and generic principles for reducing risk - Provides a new measure of risk based on the distribution of the potential losses from failure as well as the basic principles for risk-based design - Incorporates fast algorithms for system reliability analysis and discrete-event simulators - Includes the probability of failure of a structure with complex shape expressed with a simple equation
Download or read book Reliability and Risk written by Paul Schulman and published by Stanford University Press. This book was released on 2016-04-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and continued functioning of critical infrastructures—such as electricity, natural gas, transportation, and water—is a social imperative. Yet the complex connections between these systems render them increasingly precarious. Furthermore, though we depend so heavily on interconnected infrastructures, we do not fully understand the risks involved in their failure. Emery Roe and Paul R. Schulman argue that designs, policies, and laws often overlook the knowledge and experiences of those who manage these systems on the ground—reliability professionals who have vital insights that would be invaluable to planning. To combat this major blind spot, the athors construct a new theoretical perspective that reveals how to make sense of complex interconnected networks and improve reliability through management, regulation, and political leadership. To illustrate their approach in action, they present a multi-year case study of one of the world's most important "infrastructure crossroads," the San Francisco Bay-Delta. Reliability and Risk advances our understanding of what it takes to ensure the dependability of the intricate—and sometimes hazardous—systems on which we rely every day.
Download or read book Reliability and Risk Assessment written by John D. Andrews and published by . This book was released on 2002 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematician Andrews and consulting engineer Moss explain reliability and risk analysis techniques for use in assessing the safety in modern process plants and their protective systems. The main probabilistic methods are described, particularly fault tree analysis, failure mode and effect analysis, and their derivatives. Case studies are presented to show how methods have been applied to the identification and quantification of risk and reliability of an undersea mine, steam generators, and a g as turbine system against specific performance requirements. Specific topics include reliability networks, common cause failures, Markov analysis, and simulation. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Advances in Safety Reliability and Risk Management written by Christophe Berenguer and published by CRC Press. This book was released on 2011-08-31 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of topics on safety, reliability and risk management, the present publication will be of interest to academics and professionals working in a wide range of scientific, industrial and governmental sectors, including: Aeronautics and Aerospace; Chemical and Process Industry; Civil Engineering; Critical Infrastructures; Energy; Information Technology and Telecommunications; Land Transportation; Manufacturing; Maritime Transportation; Mechanical Engineering; Natural Hazards; Nuclear Industry; Offshore Industry; Policy Making and Public Planning.
Download or read book Reliability and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2023-04-26 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated for a new edition, this book introduces reliability and risks analysis, for both practicing engineers and engineering students at the undergraduate and graduate levels. Since reliability analysis is a multidisciplinary subject, this book draws together a wide range of topics and presents them in a way that applies to most engineering disciplines. What Every Engineer Should Know About Reliability and Risk Analysis, Second Edition, emphasizes an introduction and explanation of the practical methods used in reliability and risk studies, with a discussion of their uses and limitations. It offers basic and advanced methods in reliability analysis that are commonly used in daily practice and provides methods that address unique topics such as dependent failure analysis, importance analysis, and analysis of repairable systems. The book goes on to present a comprehensive overview of modern probabilistic life assessment methods such as Bayesian estimation, system reliability analysis, and human reliability. End-of-chapter problems and a solutions manual are available to support any course adoptions. This book is refined, simple, and focuses on fundamentals. The audience is the beginner with no background in reliability engineering and rudimentary knowledge of probability and statistics. It can be used by new practitioners, undergraduates, and first-year graduate students.
Download or read book Reliability Engineering and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2009-09-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tools to Proactively Predict Failure The prediction of failures involves uncertainty, and problems associated with failures are inherently probabilistic. Their solution requires optimal tools to analyze strength of evidence and understand failure events and processes to gauge confidence in a design’s reliability. Reliability Engineering and Risk Analysis: A Practical Guide, Second Edition has already introduced a generation of engineers to the practical methods and techniques used in reliability and risk studies applicable to numerous disciplines. Written for both practicing professionals and engineering students, this comprehensive overview of reliability and risk analysis techniques has been fully updated, expanded, and revised to meet current needs. It concentrates on reliability analysis of complex systems and their components and also presents basic risk analysis techniques. Since reliability analysis is a multi-disciplinary subject, the scope of this book applies to most engineering disciplines, and its content is primarily based on the materials used in undergraduate and graduate-level courses at the University of Maryland. This book has greatly benefited from its authors' industrial experience. It balances a mixture of basic theory and applications and presents a large number of examples to illustrate various technical subjects. A proven educational tool, this bestselling classic will serve anyone working on real-life failure analysis and prediction problems.
Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi
Download or read book Reliability and Risk Assessment in Engineering written by Vijay Kumar Gupta and published by Springer Nature. This book was released on 2020-05-08 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of articles on reliability and safety engineering presented during INCRS 2018. The articles cover a variety of topics such as big data analytics and their applications in reliability assessment and condition monitoring, health monitoring, management, diagnostics and prognostics of mechanical systems, design for reliability and optimization, and machine learning for industrial applications. A special aspect of this volume is the coverage of performance, failure and reliability issues in electrical distribution systems. This book will be a useful reference for graduate students, researchers and professionals working in the area of reliability assessment, condition monitoring and predictive maintenance.
Download or read book Managing Risk and Reliability of Process Plants written by Mark Tweeddale and published by Elsevier. This book was released on 2003-07-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is much specialist material written about different elements of managing risks of hazardous industries, such as hazard identification, risk analysis, and risk management. Managing Risk and Reliability of Process Plants provides a systematic and integrated coverage of all these elements in sufficient detail for the reader to be able to pursue more detailed study of particular elements or topics from a good appreciation of the whole field. The reader would use this book to keep up to date with new developments and, if they are new to the job, to learn more about the subject. The text includes a chapter of case studies and worked examples - including examples of risk assessments, which is consistent with the approach taken throughout the book of applying real-life scenarios and approaches.* Provides a source for reasonable understanding across the whole field of risk management and risk assessment. * Focuses on the how, what, and why of risk management using a consistent and well organized writing style interspersed with case studies, examples, exercises, as well as end matter.* Fills a need in the area of risk assessment and risk management in the process and chemical engineering industry as an essential multi-audience reference/resource tool, useful to managers and students.
Download or read book Reliability Maintainability and Risk written by David J. Smith and published by Elsevier. This book was released on 2011-06-29 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability, Maintainability and Risk: Practical Methods for Engineers, Eighth Edition, discusses tools and techniques for reliable and safe engineering, and for optimizing maintenance strategies. It emphasizes the importance of using reliability techniques to identify and eliminate potential failures early in the design cycle. The focus is on techniques known as RAMS (reliability, availability, maintainability, and safety-integrity). The book is organized into five parts. Part 1 on reliability parameters and costs traces the history of reliability and safety technology and presents a cost-effective approach to quality, reliability, and safety. Part 2 deals with the interpretation of failure rates, while Part 3 focuses on the prediction of reliability and risk. Part 4 discusses design and assurance techniques; review and testing techniques; reliability growth modeling; field data collection and feedback; predicting and demonstrating repair times; quantified reliability maintenance; and systematic failures. Part 5 deals with legal, management and safety issues, such as project management, product liability, and safety legislation. - 8th edition of this core reference for engineers who deal with the design or operation of any safety critical systems, processes or operations - Answers the question: how can a defect that costs less than $1000 dollars to identify at the process design stage be prevented from escalating to a $100,000 field defect, or a $1m+ catastrophe - Revised throughout, with new examples, and standards, including must have material on the new edition of global functional safety standard IEC 61508, which launches in 2010
Download or read book The Monte Carlo Simulation Method for System Reliability and Risk Analysis written by Enrico Zio and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monte Carlo simulation is one of the best tools for performing realistic analysis of complex systems as it allows most of the limiting assumptions on system behavior to be relaxed. The Monte Carlo Simulation Method for System Reliability and Risk Analysis comprehensively illustrates the Monte Carlo simulation method and its application to reliability and system engineering. Readers are given a sound understanding of the fundamentals of Monte Carlo sampling and simulation and its application for realistic system modeling. Whilst many of the topics rely on a high-level understanding of calculus, probability and statistics, simple academic examples will be provided in support to the explanation of the theoretical foundations to facilitate comprehension of the subject matter. Case studies will be introduced to provide the practical value of the most advanced techniques. This detailed approach makes The Monte Carlo Simulation Method for System Reliability and Risk Analysis a key reference for senior undergraduate and graduate students as well as researchers and practitioners. It provides a powerful tool for all those involved in system analysis for reliability, maintenance and risk evaluations.
Download or read book Reliability Assessment of Safety and Production Systems written by Jean-Pierre Signoret and published by Springer Nature. This book was released on 2021-03-23 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides, as simply as possible, sound foundations for an in-depth understanding of reliability engineering with regard to qualitative analysis, modelling, and probabilistic calculations of safety and production systems. Drawing on the authors’ extensive experience within the field of reliability engineering, it addresses and discusses a variety of topics, including: • Background and overview of safety and dependability studies; • Explanation and critical analysis of definitions related to core concepts; • Risk identification through qualitative approaches (preliminary hazard analysis, HAZOP, FMECA, etc.); • Modelling of industrial systems through static (fault tree, reliability block diagram), sequential (cause-consequence diagrams, event trees, LOPA, bowtie), and dynamic (Markov graphs, Petri nets) approaches; • Probabilistic calculations through state-of-the-art analytical or Monte Carlo simulation techniques; • Analysis, modelling, and calculations of common cause failure and uncertainties; • Linkages and combinations between the various modelling and calculation approaches; • Reliability data collection and standardization. The book features illustrations, explanations, examples, and exercises to help readers gain a detailed understanding of the topic and implement it into their own work. Further, it analyses the production availability of production systems and the functional safety of safety systems (SIL calculations), showcasing specific applications of the general theory discussed. Given its scope, this book is a valuable resource for engineers, software designers, standard developers, professors, and students.
