Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.
Download or read book Bainite in Steels written by Harshad Kumar Dharamshi Hansraj Bhadeshia and published by Maney Publishing. This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this modern classic encompasses the latest research, which sees bainitic alloys at the forefront of a new wave of "designed" steels. Contents include: Nomenclature; Introduction; Bainitic Ferrite; Carbide Precipitation; Tempering of Bainite; Thermodynamics; Kinetics; Upper and Lower Bainite; Stress and Strain Effects; Reverse Transformation from Bainite to Austenite; Acicular Ferrite; Other Morphologies of Bainite; Mechanical Properties; Modern Bainitic Alloys;Other Aspects; The Transformation of Steel.
Download or read book Performance of Mechanical Properties of Ultrahigh Strength Ferrous Steels Related to Strain Induced Transformation written by Koh-ichi Sugimoto and published by MDPI. This book was released on 2020-11-19 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of topics concerning ultrahigh-strength ferrous steels were collected in this book. At present, most of the ferrous steels are applied to cold sheet parts. However, they may be used as the materials of hot-forged parts in the future, because of the excellent performance of the mechanical properties. It is hoped that many researchers will have an interest in the applications of the ferrous steels to the hot-forging parts.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by George E. Totten and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Microstructural and Mechanical Characterization of Alloys written by Marek Sroka and published by MDPI. This book was released on 2021-01-13 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains manuscripts related to alloys (engineering materials) to discuss potential materials, methods for improvement of the strength and cyclic properties of alloys, the stability of microstructures, the possible application of new (or improved) alloys, and the use of treatment for alloy improvement. The broad spectrum of topics included in the articles of this Special Issue demonstrates that research into the microstructural and mechanical characteristics of alloys represents a contemporary field. These topics are also envisaged to be of interest to scientists in other research centers, and we can still expect new developments in this investigation field.
Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.
Download or read book Bainite and Martensite written by Carlos Garcia-Mateo and published by MDPI. This book was released on 2020-05-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructures of both martensite and bainite, although sharing some common features, depict a plethora of subtle differences that made them unique when studied in further detail. Tailoring the final properties of a microstructure based on one or the other as well as in combination with others and exploring more sophisticated concepts, such as Q&P and nanostructured bainite, are the topics which are the focus of research around the world. In understanding the key microstructural parameters controlling the final properties as well as definition of adequate process parameters to attain the desired microstructures requires that a proper understanding of the mechanism ruling their transformation and a detailed characterization first be acheived. The development of new and powerful scientific techniques and equipment (EBSD, APT, HRTEM, etc.) allow us to gain fundamental insights that help to establish some of the principles by which those microstructures are known. The developments accompanying such findings lead to further developments and intensive research providing the required metallurgical support.
Download or read book Fundamentals of Fracture Mechanics written by John Frederick Knott and published by Gruppo Italiano Frattura. This book was released on 1973 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Martensitic Transformations Chicago written by Aaron P. Stebner and published by Springer. This book was released on 2018-04-11 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection is organized around the central theme of “Martensite by Design.” Contributions include design, microstructure, properties, advanced processing and manufacturing, performance, phase transformations, and characterization.
Download or read book International Conference on TRIP Aided High Strength Ferrous Alloys written by Bruno C. De Cooman and published by . This book was released on 2002 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels - Reviews research on diffusionless transformations and phase transformations in high strength steels - Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels
Download or read book Rolling of Advanced High Strength Steels written by Jingwei Zhao and published by CRC Press. This book was released on 2017-07-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high strength steels (AHSSs) for auto-making are primarily produced by rolling, plus heat treatment technologies if necessary. However, due to the metallurgical complexity of AHSSs, it is impossible to roll all of the AHSS grades in a rolling mill with the same rolling technology. Each of AHSSs has unique applications in vehicles, and specified rolling technologies are required to produce high quality AHSS products where they might be the best employed to meet performance demands of the automotive parts. Such background has prompted the publication of this scholarly book in the area of rolling of AHSSs with a purpose of providing readers with a valuable technical document that can be used in the research and development of AHSSs for automotive and other manufacturing industries. With contributors from USA, Germany, Poland, Italy, Spain, Austria, Australia, China, India and Iran, the book highlights the latest advances in rolling technologies of AHSSs. It focuses on the theory, simulation and practice of the rolling of AHSSs: The book introduces the history, types and advances of AHSSs and their processes; proposes new theory that is applicable to the rolling of AHSSs, presents mathematical and numerical modelling of AHSSs in rolling; covers thermomechanical processing technologies of AHSSs; provides case studies on the rolling practice of the most popular AHSSs and includes other rolling-related technologies of AHSSs. The book will be useful for both theoretical and applied research aimed at AHSSs rolling technologies, and will be a scientific and valuable literature for the metallurgists, engineers, materials scientists, academics and graduate students who are studying and working with AHSSs and their rolling technologies worldwide.
Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels
Download or read book Proceedings of the 8th International Conference on Industrial Engineering written by Andrey A. Radionov and published by Springer Nature. This book was released on 2022-08-15 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. This book gathers selected papers presented at the 8th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2022. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, this book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Bainite in Steels written by H.K.D.H. Bhadeshia and published by CRC Press. This book was released on 2019-04-15 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book, much expanded to include and incorporate important developments in the subject over the last fifteen years. The book represents a comprehensive treatise on all aspects of the bainite transformation, from the choreography of atoms during the phase change to length scales that are typical of engineering applications. The alloy design that emerges from this explains the role of solute additions, and the pernicious effects of impurities such as hydrogen. The picture presented is self-consistent and therefore is able to guide the reader on the exploitation of theory to the design of some of the most exciting steels, including the world’s first bulk nanostructured metal.
Download or read book Processing Structure Property Relationships in Metals written by Alessandra Varone and published by MDPI. This book was released on 2019-11-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the industrial manufacturing of metals, the achievement of products featuring desired characteristics always requires the control of process parameters in order to obtain a suitable microstructure. The strict relationship among process parameters, microstructure, and mechanical properties is a matter of interest in different areas, such as foundry, plastic forming, sintering, welding, etc., and regards both well-established and innovative processes. Nowadays, circular economy and sustainable technological development are dominant paradigms and impose an optimized use of resources, a lower energetic impact of industrial processes and new tasks for materials and products. In this frame, this Special Issue covers a broad range of research works and contains research and review papers.
