Download or read book Reinforced Thermoplastics written by P. G. Kelleher and published by iSmithers Rapra Publishing. This book was released on 1993 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers semi and non-crystalline thermoplastics, polymer blends and various classes of reinforcing fibres, and the properties which determine their suitability for specific applications. A detailed discussion of the injection moulding of reinforced thermoplastics includes the effect of processing on fibre distribution and breakage. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Mechanical Properties of Reinforced Thermoplastics written by D.W. Clegg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reinforcement of materials such as mud and clay by hair, straw and vegetable fibres has been long established in man's history, enabling him to improve his buildings and extend his engineering abilities. With the advent of modern synthetic polymers it was rapidly realised that the addition of fibres, flakes and particulate materials to polymer matrices could improve mechanical properties significantly. Fibres and flakes are the most effective and have enabled several polymers with limited properties to compete with long-established metallic materials, reSUlting in cost, weight and processing economies. This is increasingly apparent in the selection of materials for aerospace and road vehicle applications as well as in a multitude of domestic products. Reinforced plastics, both thermosets and thermoplastics, are used in increasingly harsh environments involving elevated temperatures and aggressive conditions. Fibre reinforcement of thermoplastics dominates, and a pattern of increasing replacement of fibre reinforced thermosets by reinforced thermoplastics is emerging. This trend is encouraged by the development of continuous fibre reinforced grades of the newer high-temperature engineering thermoplastics such as polyether ether ketone. The first part of this book reviews the mechanical properties and theories of short fibre reinforcement. The principal reinforcements are reviewed and a separate chapter is devoted to the uses of natural fibres as reinforcements for thermoplastics. This is an interesting and commercially important area, especially for Third World countries v vi Preface where these fibres are grown but are facing severe competition from synthetic fibres in traditional applications such as ropes and matting.
Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.
Download or read book Thermoplastics and Thermoplastic Composites written by Michel Biron and published by William Andrew. This book was released on 2012-11-12 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the technology and business aspects of thermoplastics, providing a guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and also explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behaviour, technological properties (tenacity, friction, dimensional stability), durability (ageing, creep, fatigue), chemical and fire behaviour, electrical properties, and joining possibilities. Biron explores the technological properties and economics of the major thermoplastics and reinforced thermoplastics, such as polyethylene, and emerging polymers such as polybenzimidazole, Thermoplastic Elastomers (TPEs) and bioplastics. In the second edition, a new section 'plastics solutions for practical problems' provides over 25 case studies illustrating a wide range of design and production challenges across the spectrum of thermoplastics, from metal and glass replacement solutions, to fire retardant plastics and antimicrobials. In addition, Biron provides major new material on bioplastics and wood plastic composites (WPCs), and fully updated data throughout. Combining materials data, information on processing techniques, and economic aspects (pricing), Biron provides a unique end-to-end approach to the selection and use of materials in the plastics industry and related sectors Includes a new section of case studies, illustrating best practice across a wide range of applications and industry sectors New material on bioplastics and sustainable composites
Download or read book Reinforced Thermoplastics written by W. V. Titow and published by John Wiley & Sons. This book was released on 1975 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Thermoplastics written by W. V. Titow and published by John Wiley & Sons. This book was released on 1975 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Reinforced Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2013-10-22 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Reinforced Plastics is a complete and practical manual for specifying and selecting reinforced plastic products and services. The handbook covers all materials and classes of equipment currently available, with over 550 pages of editorial, illustrations and tables.
Download or read book Thermoplastics and Thermoplastic Composites written by Michel Biron and published by Elsevier. This book was released on 2007-04-26 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastics represent appx 90% by weight of all plastics consumed world-wide. We know them mainly in the form of polythenes, polyolefins, polystyrenes, nylons and acrylics. Under different heating conditions and by varying the composition of the plastic it is possible to make many different products with differing properties.This is a decision-making tool and source-book of information for plastics users, providing detailed accounts of the materials used, their economics,the selection of appropriate materials, and the use of thermoplastic resins and their composites. By having this book to hand, you will use the right material in the right way to produce the right product. · Provides a quick and pragmatic approach to selecting thermoplastics for the non-specialist plastics user· Offers detailed accounts of thermoplastics including economic and technological elements· Clear and easy to understand illustrated with figures, tables and graphs throughout
Download or read book Polymer Composites written by Klaus Friedrich and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer composites in various engineering applications has become state of the art. This multi-author volume provides a useful summary of updated knowledge on polymer composites in general, practically integrating experimental studies, theoretical analyses and computational modeling at different scales, i. e. , from nano- to macroscale. Detailed consideration is given to four major areas: structure and properties of polymer nanocomposites, characterization and modeling, processing and application of macrocomposites, and mechanical performance of macrocomposites. The idea to organize this volume arose from a very impressive workshop - The First International Workshop on Polymers and Composites at IVW Kaiserslautern: Invited Humboldt-Fellows and Distinguished Scientists, which was held on May 22-24,2003 at the University of Kaiserslautern, Germany. The contributing authors were invited to incorporate updated knowledge and developments into their individual chapters within a year after the workshop, which finally led to these excellent contributions. The success of this workshop was mainly sponsored by the German Alexander von Humboldt Foundation through a Sofia Kovalevskaja Award Program, financed by the Federal Ministry for Education and Research within the "Investment in the Future Program" of the German Government. In 2001, the Humboldt Foundation launched this new award program in order to offer outstanding young researchers throughout the world an opportunity to establish their own work-groups and to develop innovative research concepts virtually in Germany. One of the editors, Z.
Download or read book Short Fibre Reinforced Thermoplastics written by M. J. Folkes and published by Research Studies Press Limited. This book was released on 1982 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book The Reinforced Plastics Handbook written by John Murphy and published by Elsevier. This book was released on 1998 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new second edition of Reinforced Plastics Handbookhas been completely revised and updated to reflect changes, new techniques and components and provides new information including:-Thermosetting resins: polyesters, vinyl esters, high performance resins.-Reinforced thermoplastics: low warpage, hydrolysis-resistant grades, new forms of glass fibre, natural resins and fibres.-Major extensions on liquid crystal polymers, long fibre reinforced thermoplastics, polyurethanes and core materials.-Major additions to moulding/processing technology: latest developments in RTM, SCRIMP.-An enlarged chapter on design and applications to include extended data on sandwich constructions and polyureathane (reinforced reaction injection moulding).-The latest legislation including consumer safety (flame retardency, toxicity) and safety in the workplace (styrene emission control, solvents, low dust reduced allergy materials).
Download or read book Diaphragm Forming of Continuous Fibre Reinforced Thermoplastics written by Harald Erik Niklaus Bersee and published by . This book was released on 1996 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composites A Profile of the World wide Reinforced Plastics Industry Markets and Suppliers to 2005 written by T. Starr and published by Elsevier. This book was released on 1999-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the success of the second (1995) edition, this report takes a fresh perspective on the industry, reviewing changes and developments in industry structure, corporate strategies, market condition, technology and application trends. This profile is fully revised with market data with new forecasts to the year 2005. New and emerging technologies and applications are examined. For a PDF version of the report please call Tina Enright on +44 (0) 1865 843008 for price details.
Download or read book Natural Fibre Reinforced Polymer Composites written by Sabu Thomas and published by Archives contemporaines. This book was released on 2009 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoplastic Aromatic Polymer Composites written by Frederic Neil Cogswell and published by Elsevier. This book was released on 2013-10-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Aromatic Polymer Composites: A Study of the Structure, Processing and Properties of Carbon Fibre Reinforced Polyetheretherketone and Related Materials deals with the field of thermoplastic composite materials through a study of carbon fiber reinforced polyetheretherketone. The book is composed of twelve chapters. The first four chapters are an introduction and basic learning of thermoplastic composite materials. These chapters include discussions on the components of thermoplastics, product forms, and the microstructure of aromatic polymer composites. The processing and manufacturing technology, including the fundamental operations, control, and the wide implications of manufacturing the composite material, are analyzed. The service performance structure of three interactions, namely, material, design, and processing, are illustrated. The strength of thermoplastic composites is then considered through an analysis of both shear and extensions with elastic modulus, but in the case of material strength, the differences between tension and compression properties should be taken into account. The book also notes that the durability, temperature sensitivity, and environmental resistance should likewise be regarded for a structural composite to have practical value and satisfactory performance. Lastly, the text explains that the numerous applications of thermoplastic structural composites, such as in medicine, aviation, marine and space technology, automotive, and industrial machinery, are all important and a rigorous evaluation is therefore necessary. The book finally suggests that the research into the future developments in the thermoplastic structural composites and the trend toward new design strategies and processing technology are important in optimizing the composite's great potential. Industrial researchers in the field of chemistry and polymer composites, students, and academicians interested in the design and application of polymer composites will find this book relevant.
Download or read book Fracture Mechanical Behavior of Short Fiber Reinforced Thermoplastics written by Klaus Friedrich and published by . This book was released on 1984 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Multi preferred Fiber Orientation Constitutive Model for Fiber Mat Reinforced Thermoplastics with a Random Orientation Applied to the Stamp Thermo hydroforming Process written by Michael Andrew Zampaloni and published by . This book was released on 2003 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: