Download or read book Refinements in the Aeroprediction Code Based on Recent Wind Tunnel Data written by Frankie Gale Moore and published by . This book was released on 1999-12-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1998 (AP98) and prior versions of the aeroprediction code are based primarily on slender body and perturbation theories at low angle of attack and empirical constants that represent the nonlinear aerodynamics as a function of angle of attack, Mach number, aspect and taper ratio, and other missile geometric parameters. The primary data base upon which these empirical nonlinear constants were derived was based on the NASA/Tri-Service component data base taken in the 1970s. This data base was limited in body radius to wing semispan plus body radius ratios (r/s) of 0.5. A more recent data base taken by NASA and the former McDonnell Douglas Corporation, investigated other values of the parameter r/s of 0.25, 0.33 and 0.5. As a result of this new data base, the empirical constants in the AP98 were fine-tuned. This fine-tuning has shown the average normal force coefficient errors to be reduced by anywhere from 10 percent to over 40 percent on various missile configurations. The largest reductions in error were for configurations where the AP98 average accuracy was the worst. These new improved empirical constants will be a part of the next planned release of the aeroprediction code in 2002 (AP02). The AP98 average error on normal force coefficient of +/- 10 percent will therefore be somewhat better for the AP02.
Download or read book The 2002 Version of the Aeroprediction Code written by Frankie Gale Moore and published by . This book was released on 2002 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new version of the aeroprediction code (APC), the AP02, has been developed to address the requirements arising from advanced weapon concepts. The AP02 was formed by adding significant new technology and several productivity improvements to the previous version of the APC, the AP98. New technology added included 6 and 8 fin aerodynamics, improved nonlinear aerodynamics, improved pitch damping predictions, improved power-on base drag estimates, base-bleed effect on base drag estimation, improved axial force of nonaxisymmetric bodies and trailing-edge flap capability. Other improvements and productivity enhancements include an aerodynamic smoother, ballistic and three degree-of-freedom simulation modules as well as refinements for the pre- and post-processor for inputs and outputs of the AP02. Comparison of the predicted aerodynamics of the AP02 to AP98 and experimental data showed the AP02 to be slightly better than the AP98 in most cases that both codes would handle. However, due to the additional new technology incorporated into the AP02, many new options are available in the AP02 that are not available in the AP98. Therefore, the AP02 is more robust and, on average, is slightly more accurate than the AP98 in predicting aerodynamics of weapons.
Download or read book 39th AIAA Aerospace Sciences Meeting and Exhibit written by and published by . This book was released on 2001 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1996 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 34th Aerospace Sciences Meeting Exhibit written by and published by . This book was released on 1996 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.
Download or read book Missile Aerodynamics written by Jack Norman Nielsen and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1988-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The similarities between the airplane and the missile extend beyond their flying capabilities, and at higher operational speeds, the configuration distinctions become even less apparent. " Missile Aerodynamics," a classic now available from AIAA and Nielsen Engineering and Research, Inc., combines the best of missile and airplane aerodynamics, drawing extensively from numerous technical papers to present a rational and unified account of the principles behind missile projection. Evaluate the missile versus the airplane in a multitude of areas, from longitudinal acceleration, wing loading, roll and dynamic stability, guidance and navigation, and more. J.N. Nielsen covers every aspect of missile aerodynamics, from the classification of missiles and basic formulas to innovative aerodynamic controls. In one reliable reference, readers will find hundreds of schematics, equations, and tables with practical applications in missile design and engineering. Originally published by Nielsen Engineering and Research, Inc.
Download or read book Tactical Missile Aerodynamics written by and published by . This book was released on 1992 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability and Control of Conventional and Unconventional Aerospace Vehicle Configurations written by Bernd Chudoba and published by Springer. This book was released on 2019-07-23 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a stability and control methodology named AeroMech, capable of sizing the primary control effectors of fixed wing subsonic to hypersonic designs of conventional and unconventional configuration layout. Control power demands are harmonized with static-, dynamic-, and maneuver stability requirements, while taking the six-degree-of-freedom trim state into account. The stability and control analysis solves the static- and dynamic equations of motion combined with non-linear vortex lattice aerodynamics for analysis. The true complexity of addressing subsonic to hypersonic vehicle stability and control during the conceptual design phase is hidden in the objective to develop a generic (vehicle configuration independent) methodology concept. The inclusion of geometrically asymmetric aircraft layouts, in addition to the reasonably well-known symmetric aircraft types, contributes significantly to the overall technical complexity and level of abstraction. The first three chapters describe the preparatory work invested along with the research strategy devised, thereby placing strong emphasis on systematic and thorough knowledge utilization. The engineering-scientific method itself is derived throughout the second half of the book. This book offers a unique aerospace vehicle configuration independent (generic) methodology and mathematical algorithm. The approach satisfies the initial technical quest: How to develop a ‘configuration stability & control’ methodology module for an advanced multi-disciplinary aerospace vehicle design synthesis environment that permits consistent aerospace vehicle design evaluations?
Download or read book 87 0200 87 0248 written by and published by . This book was released on 1987 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1989 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA).
Download or read book Aeronautical Engineering A Cumulative Index to a Continuing Bibliography supplement 235 written by and published by . This book was released on 1989 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report written by and published by . This book was released on 1965 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Enginnering A Cumulative Index to a Continuing Bibliography supplement 312 written by and published by . This book was released on 1994 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
