Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Handbook of Recycled Concrete and Demolition Waste written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2013-09-30 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. - Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Research Anthology on Environmental and Societal Well Being Considerations in Buildings and Architecture written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-05-28 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it comes to architecture, there has been a focus on sustainable buildings and human well-being in the built environment. Buildings should not only be environmentally friendly and sustainable, but dually focused on human health, wellness, and experience. This includes considerations into the quality of buildings, ranging from ventilation to thermal comfort, along with environment considerations such as energy usage and material selection. Specific architectural choices and design for buildings can either contribute to or negatively impact both society and the environment, leading research in the field of architecture to be focused on environmental and societal well-being in accordance with the built environment. The Research Anthology on Environmental and Societal Well-Being Considerations in Buildings and Architecture focuses on how the built environment is being constructed to purposefully enhance societal well-being while also maintaining green standards for environmental sustainability. On one side, this book focuses on the specific building choices that can be made for the purpose of human well-being and the occupants who will utilize the building. On the other side, this book also focuses on environmental sustainability from the standpoint of green buildings and environmental concerns. Together, these topics allow this book to have a holistic view of modern architectural choices and design. This book is essential for architects, IT professionals, engineers, contractors, environmentalists, interior designers, civil planners, regional government officials, construction companies, policymakers, practitioners, researchers, academicians, and students interested in architecture and how it can promote environmental and societal well-being.

Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Construction Demolition and Disaster Waste Management written by Erik K. Lauritzen and published by CRC Press. This book was released on 2018-09-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction and Demolition Waste (CDW), from the construction, maintenance, renovation and demolition of buildings and structures, represents a large proportion of the waste in industrialized societies. Compared to other forms, such as household waste, more than 90% of CDW can be used as a resource and a substitute for construction materials, especially for primary, natural raw materials. Reuse, recovery and recycling depends on the quality and market for the materials, and the environmental impact of the processes for conversion of CDW from old structures to its use in new structures. However, the utilization today of CDW products as secondary resources is marginal. Most CDW is deposited or used as fill material, and the opportunities of high quality recycling are generally neglected. This book presents the opportunities for the sustainable and resource efficient utilisation of CDW, focusing on recycling of concrete and masonry as the major forms of CDW. The recycling of gypsum, timber, mineral wool, asphalt and other types are also described. Its aim is to present a chain of value and material streams in the transformation of obsolete buildings and structures into new buildings and structures. It takes a holistic view, focusing on the lifecycle economy (the circular economy) and integrated management aspects of various scenarios ranging from high industrial urban renewal to debris removal and management after disasters and conflicts. It is based on the author ́s 35 years of research and development combined with practical international experience within the demolition and recycling area. It addresses students, architects, civil engineers, building owners, public authorities and others working in urban planning, demolition and resource management in the building and construction sector and in the reconstruction of damaged buildings after disasters and wars.

Download or read book Construction and Demolition Waste Management in Australia written by Salman Shooshtarian and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Due to the increase in construction activities worldwide and in Australia, the generation rate of construction and demolition (C&D) waste has significantly grown in recent years. In Australia, construction projects (i.e. housing, buildings and transport infrastructure) are being delivered at an unprecedented rate. Between 2009 and 2019, the annual average growth rate in this industry was 3.33%. The industry is identified as the fourth largest contributor to Australia's growth domestic product (GDP). Unsurprisingly, this quantity of construction brings about a considerable quantity of waste. In 2019, the construction industry generated 27 million tons (or megatonnes) of waste from construction and demolition activities in Australia. Given the size of the construction market and waste generated in this industry, any change will create huge impacts. The adequate management of such a quantity has now become a priority for policymakers around the world. A holistic national approach is required to handle the growing issue of C&D waste management in Australia. Therefore, this book identifies discrepancies and inconsistencies related to C&D waste management in different Australian jurisdictions. The included chapters discuss regulations governing the C&D waste stream, discrepancies in defining waste, Australia's place in the worldwide C&D waste market, opportunities for reducing C&D waste, and the perception among C&D waste stakeholders on relevant issues and proposed reforms, among other topics. Overall, the book contributes to the Australian understanding of effective management of C&D waste by providing a clear picture of C&D waste state of play. The book can benefit policymakers and whoever is interested in C&D waste to better plan for innovative and efficient C&D waste resulting in the further diversion of C&D waste from landfills"--

Download or read book Sustainable Solid Waste Management written by Ni-Bin Chang and published by John Wiley & Sons. This book was released on 2015-02-18 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the application of system analysis techniques with case studies to help readers learn how the techniques can be applied, how the problems are solved, and which sustainable management strategies can be reached.

Download or read book Handbook of Sustainable Concrete and Industrial Waste Management written by Francesco Colangelo and published by Woodhead Publishing. This book was released on 2021-12-01 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Sustainable Concrete and Industrial Waste Management summarizes key research trends in recycling and reusing concrete and industrial waste to reduce their environmental impact. This volume also includes important contributions in collaboration with the CRI-TEST Innovation Lab, Naples – Acerra. Part one discusses eco-friendly innovative cement and concrete and reviews key substitute materials. Part two analyzes the use of industrial waste as aggregates and the mechanical properties of concrete containing waste materials. Part three discusses differences between innovative binders, focusing on alkali-activated and geopolymer concrete. Part four provides a thorough overview of the life cycle assessment (LCA) of concrete containing industrial wastes and the impacts related to the logistics of wastes, the production of the concrete, and the management of industrial wastes. By providing research examples, case studies, and practical strategies, this book is a state-of-the-art reference for researchers working in construction materials, civil or structural engineering, and engineers working in the industry. - Offers a systematic and comprehensive source of information on the latest developments in sustainable concrete; - Analyzes different types of sustainable concrete and innovative binders from chemical, physical, and mechanical points of view; - Includes real case studies showing application of the LCA methodology.

Download or read book Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on 2019-11-28 with total page 1417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).

Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.

Download or read book Environment at a Glance 2015 OECD Indicators written by OECD and published by OECD Publishing. This book was released on 2015-10-26 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environment at a Glance 2015 updates key environmental indicators and relevant socio-economic and sectoral indicators to track OECD country progress on major environmental issues and inform policy development and evaluation. This year's edition includes increased coverage of environmentally ...

Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration.Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete.With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. - Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites - Discusses the management of waste composites and EU legislation with regards to recycling - Examines methods for recycling, including thermal technologies and mechanical methods

Download or read book Sustainable Industrial Design and Waste Management written by Salah El Haggar and published by Academic Press. This book was released on 2010-07-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Industrial Design and Waste Management was inspired by the need to have a text that enveloped awareness and solutions to the ongoing issues and concerns of waste generated from industry. The development of science and technology has increased human capacity to extract resources from nature and it is only recently that industries are being held accountable for the detrimental effects the waste they produce has on the environment. Increased governmental research, regulation and corporate accountability are digging up issues pertaining to pollution control and waste treatment and environmental protection. The traditional approach for clinical waste, agricultural waste, industrial waste, and municipal waste are depleting our natural resources. The main objective of this book is to conserve the natural resources by approaching 100 % full utilization of all types of wastes by cradle – to - cradle concepts, using Industrial Ecology methodology documented with case studies. Sustainable development and environmental protection cannot be achieved without establishing the concept of industrial ecology. The main tools necessary for establishing Industrial Ecology and sustainable development will be covered in the book. The concept of "industrial ecology will help the industrial system to be managed and operated more or less like a natural ecosystem hence causing as less damage as possible to the surrounding environment. - Numerous case studies allow the reader to adapt concepts according to personal interest/field - Reveals innovative technologies for the conservation of natural resources - The only book which provides an integrated approach for sustainable development including tools, methodology, and indicators for sustainable development

Download or read book Waste To Profit W t P written by Linda Zikhona Linganiso and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of a circular economy in the construction sector captures global material flow through product design, inverse logistics, innovation and collaborations. The circulation of the economy takes into consideration global population influence, which affects the economy through a variety of construction product flows in particular. The increase in consumers means increasing product and services which participate in different waste streams. The emerging sustainable development in the construction industry requires the recycling of waste materials to reduce the negative environmental impact of construction activities. Accumulation and management of construction wastes is also becoming a major environmental and economical concern in many developing countries. Huge volumes of waste generated end up piled on landfill sites or illegally dumped, posing serious health and ecological problems. In the construction industry, recycling of waste concrete, masonry, cement, gypsum, to mention but a few, has become an important aspect due to the continued increase of construction wastes and depletion of natural aggregates. Why not establish a business system that is specifically designed to do much more value addition to the construction wastes and develop products which are not only in demand locally but internationally, to encourage exports for maximum financial gain. This book aims to analyze the current business model in the construction sector and the current legislation concerning waste management. It also highlights efforts required in order to refine the recycling methods in favor of a circular economy in the constuction industry. In support of a transition to a low carbon economy, different types of materials which can be produced from the construction wastes are indicated including processes which are used to obtain the final products. The market demand including penetration of the resulting products are given extensively. Policies and regulations to govern these undertakings are highlighted also. The municipalities will learn to redirect the local construction industries on how to avoid dumping at landfill sites as the space has currently become an issue. Researchers globally will learn how to go up through the Technology Readiness Levels (TRL) from basic research through prototype development and finally up to commercialization in projects related to the construction.

Download or read book Recycled Aggregates written by Ravindra K Dhir and published by ICE Publishing. This book was released on 2019-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an ideal source of information on the subject and would be a suitable addition to any library as a resource for researchers seeking to develop an overview of the research on this topic.

Download or read book Motivating Change Sustainable Design and Behaviour in the Built Environment written by Robert Crocker and published by Routledge. This book was released on 2013-07-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s most pressing challenges require behaviour change at many levels, from the city to the individual. This book focuses on the collective influences that can be seen to shape change. Exploring the underlying dimensions of behaviour change in terms of consumption, media, social innovation and urban systems, the essays in this book are from many disciplines, including architecture, urban design, industrial design and engineering, sociology, psychology, cultural studies, waste management and public policy. Aimed especially at designers and architects, Motivating Change explores the diversity of current approaches to change, and the multiple ways in which behaviour can be understood as an enactment of values and beliefs, standards and habitual practices in daily life, and more broadly in the urban environment.

Download or read book Sustainable Construction Materials written by Ravindra K. Dhir OBE and published by Woodhead Publishing. This book was released on 2019-01-05 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Materials: Recycled Aggregate focuses on the massive systematic need that is necessary to encourage the uptake of recycled and secondary materials (RSM) in the construction industry. This book is the fifth and the last of the series on sustainable construction materials and like the previous four, it is also different to the norm. Its uniqueness lies in using the newly developed, Analytical Systemisation Method, in building the data-matrix sourced from 1413 publications, contributed by 2213 authors from 965 institutions in 67 countries, from 1977 to 2018, on the subject of recycled aggregate as a construction material, and systematically analysing, evaluating and modelling this information for use of the material as an aggregate concrete and mortar, geotechnics and road pavement applications. Environmental issues, case studies and standards are also discussed. The work establishes what is already known and can be used to further progress the use of sustainable construction materials. It can also help to avoid repetitive research and save valuable resources. The book is structured in an incisive and easy to digest manner and is particularly suited for researchers, academics, design engineers, specifiers, contractors, and government bodies dealing with construction works. - Provides an exhaustive and comprehensively organized list of globally-based published literature spanning 5000 references - Offers an analysis, evaluation, repackaging and modeling of existing knowledge that encourages more responsible use of waste materials - Provides a wealth of knowledge for use in many sectors relating to the construction profession, including academia, research, practice and adoption of RSM