Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Recrystallization Grain Growth and Textures written by American Society for Metals and published by . This book was released on 1966 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization in Materials Processing written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Grain Growth III written by Suk Joong L. Kang and published by Trans Tech Publications Ltd. This book was released on 2007-10-15 with total page 1461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Recrystallization and Grain Growth, ReX & GG III, held in Jeju Island, Korea, June 10-15, 2007
Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications.After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering.With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. - Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys - Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications - Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Ni free Ti based Shape Memory Alloys written by Hee Young Kim and published by Butterworth-Heinemann. This book was released on 2018-09-17 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ni-free Ti-based Shape Memory Alloys reviews the fundamental issues of biomedical beta-type Ti base shape memory and superelastic alloys, including martensitic transformation, shape memory and superelastic properties, alloy development, thermomechanical treatment and microstructure control, and biocompatibility. Some unique properties, such as large nonlinear elastic behavior and low Young's modulus, observed in metastable Ti alloys are discussed on the basis of phase stability. As it is expected that superelastic Ti alloys will further expand the applications of shape memory alloys within the biomedical field, this book provides a comprehensive review of these new findings in Ti-base shape memory and superelastic alloys. - Includes coverage of phase transformations in titanium alloys - Discusses mechanical properties and alloy development - Presents a review of Ti-based shape alloys and their applications
Download or read book Recent Developments in the Study of Recrystallization written by Peter Wilson and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization is a phenomenon moderately well documented in the geological and metallurgical literature. This book provides a timely overview of the latest research and methods in a variety of fields where recrystallization is studied and is an important factor. The main advantage of a new look at these fields is the rapid increase in modern techniques, such as TEM, spectrometers and modeling capabilities, all of which are providing us with far better images and analysis than ever previously possible. This book will be invaluable to a wide range of research scientists; metallurgists looking to improve properties of alloys, those interested in how the latest equipment may be used to image grains and to all those who work with frozen aqueous solutions where recrystallization may be a problem.
Download or read book 2D and 3D Grain Growth Modeling and Simulation written by Luis Antonio Barrales-Mora and published by Cuvillier Verlag. This book was released on 2008 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain Boundary Migration in Metals written by Gunter Gottstein and published by CRC Press. This book was released on 1999-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.
Download or read book Recrystallization and Grain Growth written by and published by . This book was released on 2004 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preferred Orientation in Deformed Metal and Rocks written by Hans Rudolf Wenk and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the texture analysis of deformed materials and explores methods of determining and interpreting the preferred orientation of crystals in deformed polycrystalline aggregates.**The book reviews: 1) the techniques, procedures, and theoretical basis for the accumulation and analysis of orientation data; 2)the processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation; 3) the textures in specific systems and application of principles to the solution of specific problems.**With a combination of metallurgic and geologic applications, Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis will be an important source book for students and researchers in materials science, solid state physics, structural geology, and geophysics.**FROM THE PREFACE: Determination and interpretation of the preferred orientation of crystals in deformed polycrystalline aggregates (in this volume also referred to as texture) has been of longstanding concern to both materials scientists and geologists. A similar theoretical background--such as the dislocation theory of crystal plasticity--has been the basis of understanding flow in metals and rocks; and similar determinative techniques--including microscopy and x-ray diffraction--have been used to study textures and microstructures. Whereas many of the fundamental principles have been established early this century by scientists such as Jeffery, Sachs, Sander, Schmid, Schmidt, and Taylor, only in recent years has knowledge reached a level that provides a quantitative framework which has replaced a largely phenomenological approach. This is expressed in the sudden new emphasis on textural studies, as documented by the large number of recent publications.**This volume contains material to serve as an introduction for those who wish to enter this field as well as reviews for those who are already engaged in advanced research....**The book is divided into three parts. The first (Chapters 2*b17) deals with techniques, procedures, and theoretical bases for the accumulation and analysis of orientation data. The second (Chapters 8*b112) introduces processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation. All those chapters emphasize basic principles and apply to metals as well as to minerals. The third part (Chapters 13*b126) illustrates textures in specific systems and the application of the principles set out in the earlier chapters to the solution of specific problems. Readers of these chapters will quickly become aware that metals have been more exhaustively studied than minerals; but they will also realize that, because of their structural symmetry, metals are in general much simpler than rocks and that the intepretation of metal textures is less involved. An extensive list of relevant references provides access to much of the original literature on textures....
Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer Nature. This book was released on 2022-01-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a strong introduction to the fundamental concepts of materials science. It conveys the quintessence of this interdisciplinary field, distinguishing it from merely solid-state physics and solid-state chemistry, using metals as model systems to elucidate the relation between microstructure and materials properties. Mittemeijer's Fundamentals of Materials Science provides a consistent treatment of the subject matter with a special focus on the microstructure-property relationship. Richly illustrated and thoroughly referenced, it is the ideal adoption for an entire undergraduate, and even graduate, course of study in materials science and engineering. It delivers a solid background against which more specialized texts can be studied, covering the necessary breadth of key topics such as crystallography, structure defects, phase equilibria and transformations, diffusion and kinetics, and mechanical properties. The success of the first edition has led to this updated and extended second edition, featuring detailed discussion of electron microscopy, supermicroscopy and diffraction methods, an extended treatment of diffusion in solids, and a separate chapter on phase transformation kinetics. “In a lucid and masterly manner, the ways in which the microstructure can affect a host of basic phenomena in metals are described.... By consistently staying with the postulated topic of the microstructure - property relationship, this book occupies a singular position within the broad spectrum of comparable materials science literature .... it will also be of permanent value as a reference book for background refreshing, not least because of its unique annotated intermezzi; an ambitious, remarkable work.” G. Petzow in International Journal of Materials Research. “The biggest strength of the book is the discussion of the structure-property relationships, which the author has accomplished admirably.... In a nutshell, the book should not be looked at as a quick ‘cook book’ type text, but as a serious, critical treatise for some significant time to come.” G.S. Upadhyaya in Science of Sintering. “The role of lattice defects in deformation processes is clearly illustrated using excellent diagrams . Included are many footnotes, ‘Intermezzos’, ‘Epilogues’ and asides within the text from the author’s experience. This ..... soon becomes valued for the interesting insights into the subject and shows the human side of its history. Overall this book provides a refreshing treatment of this important subject and should prove a useful addition to the existing text books available to undergraduate and graduate students and researchers in the field of materials science.” M. Davies in Materials World.
Download or read book Microstructural Design of Advanced Engineering Materials written by Dmitri A. Molodov and published by John Wiley & Sons. This book was released on 2013-07-17 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.
Download or read book The Origin of Recrystallization Textures written by J. E. Burke and published by . This book was released on 1951 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume
