Download or read book Recrystallization and Grain Growth IV written by Eric J. Palmiere and published by Trans Tech Publications Ltd. This book was released on 2012-04-12 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Fourth International Conference on Recrystallization and Grain Growth, July 4-9, 2010, Sheffield, UK
Download or read book Bainite and Martensite written by Carlos Garcia-Mateo and published by MDPI. This book was released on 2020-05-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructures of both martensite and bainite, although sharing some common features, depict a plethora of subtle differences that made them unique when studied in further detail. Tailoring the final properties of a microstructure based on one or the other as well as in combination with others and exploring more sophisticated concepts, such as Q&P and nanostructured bainite, are the topics which are the focus of research around the world. In understanding the key microstructural parameters controlling the final properties as well as definition of adequate process parameters to attain the desired microstructures requires that a proper understanding of the mechanism ruling their transformation and a detailed characterization first be acheived. The development of new and powerful scientific techniques and equipment (EBSD, APT, HRTEM, etc.) allow us to gain fundamental insights that help to establish some of the principles by which those microstructures are known. The developments accompanying such findings lead to further developments and intensive research providing the required metallurgical support.
Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges.* Covers a wide range of subjects and industrial applications* Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes
Download or read book Regarding the Dead written by Alexandra Fletcher (Museum curator) and published by British Museum Research Public. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key publication on the British Museum's approach to the ethical issues surrounding the inclusion of human remains in museum collections and possible solutions to the dilemmas relating to their curation, storage, access management and display.
Download or read book Handbook of Food Preservation written by M. Shafiur Rahman and published by CRC Press. This book was released on 2007-07-16 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of food is no longer simple or straightforward, but is now a highly inter-disciplinary science. A number of new techniques have developed to extend shelf-life, minimize risk, protect the environment, and improve functional, sensory, and nutritional properties. The ever-increasing number of food products and preservation techniques cr
Download or read book Handbook of Pharmaceutical Excipients written by Raymond C. Rowe and published by Amer Pharmacists Assn. This book was released on 2009-01-01 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: An internationally acclaimed reference work recognized as one of the most authoritative and comprehensive sources of information on excipients used in pharmaceutical formulation with this new edition providing 340 excipient monographs. Incorporates information on the uses, and chemical and physical properties of excipients systematically collated from a variety of international sources including: pharmacopeias, patents, primary and secondary literature, websites, and manufacturers' data; extensive data provided on the applications, licensing, and safety of excipients; comprehensively cross-referenced and indexed, with many additional excipients described as related substances and an international supplier's directory and detailed information on trade names and specific grades or types of excipients commercially available.
Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.
Download or read book Geological Hazards in the UK written by D.P. Giles and published by Geological Society of London. This book was released on 2020-06-09 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The UK is perhaps unique globally in that it presents the full spectrum of geological time, stratigraphy and associated lithologies within its boundaries. With this wide range of geological assemblages comes a wide range of geological hazards, whether they be geophysical (earthquakes, effects of volcanic eruptions, tsunami, landslides), geotechnical (collapsible, compressible, liquefiable, shearing, swelling and shrinking soils), geochemical (dissolution, radon and methane gas hazards) or georesource related (coal, chalk and other mineral extraction). An awareness of these hazards and the risks that they pose is a key requirement of the engineering geologist. The Geological Society considered that a Working Party Report would help to put the study and assessment of geohazards into the wider social context, helping the engineering geologist to better communicate the issues concerning geohazards in the UK to the client and the public. This volume sets out to define and explain these geohazards, to detail their detection, monitoring and management and to provide a basis for further research and understanding.
Download or read book Handbook of Fruits and Fruit Processing written by Y. H. Hui and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of fruits continues to undergo rapid change. In the Handbook of Fruits and Fruit Processing, Dr. Y.H. Hui and his editorial team have assembled over forty respected academicians and industry professionals to create an indispensable resource on the scientific principles and technological methods for processing fruits of all types. The book describes the processing of fruits from four perspectives: a scientific basis, manufacturing and engineering principles, production techniques, and processing of individual fruits. A scientific knowledge of the horticulture, biology, chemistry, and nutrition of fruits forms the foundation. A presentation of technological and engineering principles involved in processing fruits is a prelude to their commercial production. As examples, the manufacture of several categories of fruit products is discussed. The final part of the book discusses individual fruits, covering their harvest to a finished product in a retail market. As a professional reference book replete with the latest research or as a practical textbook filled with example after example of commodity applications, the Handbook of Fruits and Fruit Processing is the current, comprehensive, yet compact resource ideal for the fruit industry.
Download or read book Ceramic Materials and Components for Engines written by Jürgen G. Heinrich and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.
Download or read book Food Emulsifiers and Their Applications written by Richard W Hartel and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food emulsions have existed since long before people began to process foods for distribution and consumption. Milk, for example, is a natural emulsion/colloid in which a nutritional fat is stabilized by a milk-fat-globule membrane. Early processed foods were developed when people began to explore the art of cuisine. Butter and gravies were early foods used to enhance flavors and aid in cooking. By contrast, food emulsifiers have only recently been recognized for their abil ity to stabilize foods during processing and distribution. As economies of scale emerged, pressures for higher quality and extension of shelf life prodded the de velopment of food emulsifiers and their adjunct technologies. Natural emulsifiers, such as egg and milk proteins and phospholipids, were the first to be generally utilized. Development of technologies for processing oils, such as refining, bleaching, and hydrogenation, led to the design of synthetic food emulsifiers. Formulation of food emulsions has, until recently, been practiced more as an art than a science. The complexity offood systems has been the barrier to funda mental understanding. Scientists have long studied emulsions using pure water, hydrocarbon, and surfactant, but food systems, by contrast, are typically a com plex mixture of carbohydrate, lipid, protein, salts, and acid. Other surface-active ingredients, such as proteins and phospholipids, can demonstrate either syner- XV xvi Preface gistic or deleterious functionality during processing or in the finished food.
Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.
Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.
Download or read book Reliability and Statistics in Transportation and Communication written by Igor Kabashkin and published by Springer. This book was released on 2018-01-23 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge theories and methods for analyzing complex systems, such as transportation and communication networks and discusses multi-disciplinary approaches to dependability problems encountered when dealing with complex systems in practice. The book presents the most noteworthy methods and results discussed at the International Conference on Reliability and Statistics in Transportation and Communication (RelStat), which took place in Riga, Latvia on October 18 – 21, 2017. It spans a broad spectrum of topics, from mathematical models and design methodologies, to software engineering and data security issues, as well as practical problems in technical systems, such as transportation, and telecommunications.
