Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--

Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.

Download or read book Introduction to Reconfigurable Computing written by Christophe Bobda and published by Springer Science & Business Media. This book was released on 2007-09-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a comprehensive study of the field. It provides an entry point to the novice willing to move in the research field reconfigurable computing, FPGA and system on programmable chip design. The book can also be used as teaching reference for a graduate course in computer engineering, or as reference to advance electrical and computer engineers. It provides a very strong theoretical and practical background to the field, from the early Estrin’s machine to the very modern architecture such as embedded logic devices.

Download or read book Reconfigurable System Design and Verification written by Pao-Ann Hsiung and published by CRC Press. This book was released on 2018-10-08 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable systems have pervaded nearly all fields of computation and will continue to do so for the foreseeable future. Reconfigurable System Design and Verification provides a compendium of design and verification techniques for reconfigurable systems, allowing you to quickly search for a technique and determine if it is appropriate to the task at hand. It bridges the gap between the need for reconfigurable computing education and the burgeoning development of numerous different techniques in the design and verification of reconfigurable systems in various application domains. The text explains topics in such a way that they can be immediately grasped and put into practice. It starts with an overview of reconfigurable computing architectures and platforms and demonstrates how to develop reconfigurable systems. This sets up the discussion of the hardware, software, and system techniques that form the core of the text. The authors classify design and verification techniques into primary and secondary categories, allowing the appropriate ones to be easily located and compared. The techniques discussed range from system modeling and system-level design to co-simulation and formal verification. Case studies illustrating real-world applications, detailed explanations of complex algorithms, and self-explaining illustrations add depth to the presentation. Comprehensively covering all techniques related to the hardware-software design and verification of reconfigurable systems, this book provides a single source for information that otherwise would have been dispersed among the literature, making it very difficult to search, compare, and select the technique most suitable. The authors do it all for you, making it easy to find the techniques that fit your system requirements, without having to surf the net or digital libraries to find the candidate techniques and compare them yourself.

Download or read book Dynamically Reconfigurable Systems written by Marco Platzner and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamically Reconfigurable Systems is the first ever to focus on the emerging field of Dynamically Reconfigurable Computing Systems. While programmable logic and design-time configurability are well elaborated and covered by various texts, this book presents a unique overview over the state of the art and recent results for dynamic and run-time reconfigurable computing systems. Reconfigurable hardware is not only of utmost importance for large manufacturers and vendors of microelectronic devices and systems, but also a very attractive technology for smaller and medium-sized companies. Hence, Dynamically Reconfigurable Systems also addresses researchers and engineers actively working in the field and provides them with information on the newest developments and trends in dynamic and run-time reconfigurable systems.

Download or read book Behavioral Modeling for Embedded Systems and Technologies Applications for Design and Implementation written by Gomes, Lu¡s and published by IGI Global. This book was released on 2009-07-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides innovative behavior models currently used for developing embedded systems, accentuating on graphical and visual notations"--Provided by publisher.

Download or read book Compilation and Synthesis for Embedded Reconfigurable Systems written by João Manuel Paiva Cardoso and published by Springer Science & Business Media. This book was released on 2013-05-16 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides techniques to tackle the design challenges raised by the increasing diversity and complexity of emerging, heterogeneous architectures for embedded systems. It describes an approach based on techniques from software engineering called aspect-oriented programming, which allow designers to control today’s sophisticated design tool chains, while maintaining a single application source code. Readers are introduced to the basic concepts of an aspect-oriented, domain specific language that enables control of a wide range of compilation and synthesis tools in the partitioning and mapping of an application to a heterogeneous (and possibly multi-core) target architecture. Several examples are presented that illustrate the benefits of the approach developed for applications from avionics and digital signal processing. Using the aspect-oriented programming techniques presented in this book, developers can reuse extensive sections of their designs, while preserving the original application source-code, thus promoting developer productivity as well as architecture and performance portability. Describes an aspect-oriented approach for the compilation and synthesis of applications targeting heterogeneous embedded computing architectures. Includes examples using an integrated tool chain for compilation and synthesis. Provides validation and evaluation for targeted reconfigurable heterogeneous architectures. Enables design portability, given changing target devices· Allows developers to maintain a single application source code when targeting multiple architectures.

Download or read book Model Based Testing for Embedded Systems written by Justyna Zander and published by CRC Press. This book was released on 2017-12-19 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: What the experts have to say about Model-Based Testing for Embedded Systems: "This book is exactly what is needed at the exact right time in this fast-growing area. From its beginnings over 10 years ago of deriving tests from UML statecharts, model-based testing has matured into a topic with both breadth and depth. Testing embedded systems is a natural application of MBT, and this book hits the nail exactly on the head. Numerous topics are presented clearly, thoroughly, and concisely in this cutting-edge book. The authors are world-class leading experts in this area and teach us well-used and validated techniques, along with new ideas for solving hard problems. "It is rare that a book can take recent research advances and present them in a form ready for practical use, but this book accomplishes that and more. I am anxious to recommend this in my consulting and to teach a new class to my students." —Dr. Jeff Offutt, professor of software engineering, George Mason University, Fairfax, Virginia, USA "This handbook is the best resource I am aware of on the automated testing of embedded systems. It is thorough, comprehensive, and authoritative. It covers all important technical and scientific aspects but also provides highly interesting insights into the state of practice of model-based testing for embedded systems." —Dr. Lionel C. Briand, IEEE Fellow, Simula Research Laboratory, Lysaker, Norway, and professor at the University of Oslo, Norway "As model-based testing is entering the mainstream, such a comprehensive and intelligible book is a must-read for anyone looking for more information about improved testing methods for embedded systems. Illustrated with numerous aspects of these techniques from many contributors, it gives a clear picture of what the state of the art is today." —Dr. Bruno Legeard, CTO of Smartesting, professor of Software Engineering at the University of Franche-Comté, Besançon, France, and co-author of Practical Model-Based Testing

Download or read book Synthesis Techniques and Optimizations for Reconfigurable Systems written by Ryan Kastner and published by Springer Science & Business Media. This book was released on 2003-10-27 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis Techniques and Optimization for Reconfigurable Systems discusses methods used to model reconfigurable applications at the system level, many of which could be incorporated directly into modern compilers. The book also discusses a framework for reconfigurable system synthesis, which bridges the gap between application-level compiler analysis and high-level device synthesis. The development of this framework (discussed in Chapter 5), and the creation of application analysis which further optimize its output (discussed in Chapters 7, 8, and 9), represent over four years of rigorous investigation within UCLA's Embedded and Reconfigurable Laboratory (ERLab) and UCSB's Extensible, Programmable and Reconfigirable Embedded SystemS (ExPRESS) Group. The research of these systems has not yet matured, and we continually strive to develop data and methods, which will extend the collective understanding of reconfigurable system synthesis.

Download or read book Designing Embedded Processors written by Jörg Henkel and published by Springer Science & Business Media. This book was released on 2007-07-27 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the hard-pressed systems designer this book will come as a godsend. It is a hands-on guide to the many ways in which processor-based systems are designed to allow low power devices. Covering a huge range of topics, and co-authored by some of the field’s top practitioners, the book provides a good starting point for engineers in the area, and to research students embarking upon work on embedded systems and architectures.

Download or read book Field Programmable Logic and Applications written by Patrick Lysaght and published by Springer. This book was released on 2004-06-22 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the 9th International Workshop on Field ProgrammableLogic and Applications (FPL’99), hosted by the University of Strathclyde in Glasgow, Scotland, August 30 – September 1, 1999. FPL’99 is the ninth in the series of annual FPL workshops. The FPL’99 programme committee has been fortunate to have received a large number of high-quality papers addressing a wide range of topics. From these, 33 papers have been selected for presentation at the workshop and a further 32 papers have been accepted for the poster sessions. A total of 65 papers from 20 countries are included in this volume. FPL is a subject area that attracts researchers from both electronic engine- ing and computer science. Whether we are engaged in research into soft ha- ware or hard software seems to be primarily a question of perspective. What is unquestionable is that the interaction of groups of researchers from di?erent backgrounds results in stimulating and productive research. As we prepare for the new millennium, the premier European forum for - searchers in ?eld programmable logic remains the FPL workshop. Next year the FPL series of workshopswill celebrate its tenth anniversary.The contribution of so many overseas researchers has been a particularly attractive feature of these events, giving them a truly international perspective, while the informal and convivial atmosphere that pervades the workshops have been their hallmark. We look forward to preserving these features in the future while continuing to expand the size and quality of the events.

Download or read book Reconfigurable System Design and Verification written by Pao-Ann Hsiung and published by CRC Press. This book was released on 2018-10-08 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable systems have pervaded nearly all fields of computation and will continue to do so for the foreseeable future. Reconfigurable System Design and Verification provides a compendium of design and verification techniques for reconfigurable systems, allowing you to quickly search for a technique and determine if it is appropriate to the task at hand. It bridges the gap between the need for reconfigurable computing education and the burgeoning development of numerous different techniques in the design and verification of reconfigurable systems in various application domains. The text explains topics in such a way that they can be immediately grasped and put into practice. It starts with an overview of reconfigurable computing architectures and platforms and demonstrates how to develop reconfigurable systems. This sets up the discussion of the hardware, software, and system techniques that form the core of the text. The authors classify design and verification techniques into primary and secondary categories, allowing the appropriate ones to be easily located and compared. The techniques discussed range from system modeling and system-level design to co-simulation and formal verification. Case studies illustrating real-world applications, detailed explanations of complex algorithms, and self-explaining illustrations add depth to the presentation. Comprehensively covering all techniques related to the hardware-software design and verification of reconfigurable systems, this book provides a single source for information that otherwise would have been dispersed among the literature, making it very difficult to search, compare, and select the technique most suitable. The authors do it all for you, making it easy to find the techniques that fit your system requirements, without having to surf the net or digital libraries to find the candidate techniques and compare them yourself.

Download or read book Field Programmable Logic and Applications From FPGAs to Computing Paradigm written by Reiner W. Hartenstein and published by Springer Science & Business Media. This book was released on 1998-08-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Workshop on Field-Programmable Logics and Applications, FPL '98, held in Tallinn, Estonia, in August/September 1998. The 39 revised full papers presented were carefully selected for inclusion in the book from a total of 86 submissions. Also included are 30 refereed high-quality posters. The papers are organized in topical sections on design methods, general aspects, prototyping and simulation, development methods, accelerators, system architectures, hardware/software codesign, system development, algorithms on FPGAs, and applications.

Download or read book Languages Design Methods and Tools for Electronic System Design written by Rolf Drechsler and published by Springer. This book was released on 2016-05-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the eighteenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on September 14-16, 2015, in Barcelona, Spain. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.

Download or read book Field Programmable Logic and Applications The Roadmap to Reconfigurable Computing written by Reiner W. Hartenstein and published by Springer. This book was released on 2003-06-29 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the proceedings volume of the 10th International Conference on Field Programmable Logic and its Applications (FPL), held August 27 30, 2000 in Villach, Austria, which covered areas like reconfigurable logic (RL), reconfigurable computing (RC), and its applications, and all other aspects. Its subtitle "The Roadmap to Reconfigurable Computing" reminds us, that we are currently witnessing the runaway of a breakthrough. The annual FPL series is the eldest international conference in the world covering configware and all its aspects. It was founded 1991 at Oxford University (UK) and is 2 years older than its two most important competitors usually taking place at Monterey and Napa. FPL has been held at Oxford, Vienna, Prague, Darmstadt, London, Tallinn, and Glasgow (also see: http://www. fpl. uni kl. de/FPL/). The New Case for Reconfigurable Platforms: Converging Media. Indicated by palmtops, smart mobile phones, many other portables, and consumer electronics, media such as voice, sound, video, TV, wireless, cable, telephone, and Internet continue to converge. This creates new opportunities and even necessities for reconfigurable platform usage. The new converged media require high volume, flexible, multi purpose, multi standard, low power products adaptable to support evolving standards, emerging new standards, field upgrades, bug fixes, and, to meet the needs of a growing number of different kinds of services offered to zillions of individual subscribers preferring different media mixes.

Download or read book Reconfigurable Computing Architectures Tools and Applications written by Phaophak Sirisuk and published by Springer. This book was released on 2010-03-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recon?gurable computing (RC) systems have generated considerable interest in the embedded and high-performance computing communities over the past two decades, with ?eld programmable gate arrays (FPGAs) as the leading techn- ogy at the helm of innovation in this discipline. Achieving orders of magnitude performance and power improvements using FPGAs over traditional microp- cessorsis not uncommon for well-suitedapplications. But even with two decades of research and technological advances, FPGA design still presents a subst- tial challenge and often necessitates hardware design expertise to exploit its true potential. Although the challenges to address the design productivity - sues are steep, the promise and the potential of the RC technology in terms of performance, power, size, and versatility continue to attract application design engineers and RC researchers alike. The International Symposium on Applied Recon?gurable Computing (ARC) aims to bring together researchers and practitioners of RC systems with an emphasis on practical applications and design methodologies of this promising technology. This year’s ARC symposium (The sixth ARC symposium) was held in Bangkok, Thailand during March 17–19, 2010, and attracted papers in three primary focus areas:RC applications, RC architectures, and RC design meth- ologies.

Download or read book Academic Press Library in Signal Processing written by and published by Academic Press. This book was released on 2013-09-14 with total page 1131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in Image, Video Processing and Analysis, Hardware, Audio, Acoustic and Speech Processing. With this reference source you will: - Quickly grasp a new area of research - Understand the underlying principles of a topic and its application - Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved - Quick tutorial reviews of important and emerging topics of research in Image, Video Processing and Analysis, Hardware, Audio, Acoustic and Speech Processing - Presents core principles and shows their application - Reference content on core principles, technologies, algorithms and applications - Comprehensive references to journal articles and other literature on which to build further, more specific and detailed knowledge - Edited by leading people in the field who, through their reputation, have been able to commission experts to write on a particular topic