Download or read book Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment Frame Buildings FEMA 351 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide structural engineers with recommended criteria for evaluation of the probable performance of existing steel moment-frame buildings in future earthquakes and to provide a basis for updating and revision of evaluation and rehabilitation guidelines and standards. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended evaluation and upgrade criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific recommendations for design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
- Author : SAC Joint Venture. Guidelines Development Committee
- Publisher :
- Release : 2000
- ISBN :
- Pages : 260 pages
Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment frame Buildings
Download or read book Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment frame Buildings written by SAC Joint Venture. Guidelines Development Committee and published by . This book was released on 2000 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Recommended Specifications and Quality Assurance Guidelines for Steel Moment Frame Construction for Seismic Applications FEMA 353 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications has been prepared by the SAC Joint Venture, under contract to the Federal Emergency Management Agency, to indicate those standards of workmanship for structural steel fabrication and erection deemed necessary to achieve reliably the design performance objectives contained in the set of companion publications prepared under this same contract: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, which provides recommended criteria, supplemental to FEMA-302, 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria; FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings, which provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance; and FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded, Steel Moment-Frame Buildings, which provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. The recommended design criteria contained in these three companion reports are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications.
Download or read book Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment Frame Buidlings FEMA 352 written by Federal Emergency Management Agency and published by Createspace Independent Pub. This book was released on 2013-03-16 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-352 – Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings, has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide communities and organizations developing programs for the assessment, occupancy status, and repair of welded steel moment-frame buildings that have been subjected to the effects of strong earthquake ground shaking. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 – Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA 302 – 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 – Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 – Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 – Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended postearthquake damage assessment and repair criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific damage assessment, safety evaluation and repair procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment frame Buildings written by SAC Joint Venture. Guidelines Development Committee and published by FEMA. This book was released on 2000 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment frame Buildings written by SAC Joint Venture. Guidelines Development Committee and published by . This book was released on 2000 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
- Author :
- Publisher :
- Release : 2000
- ISBN :
- Pages : 0 pages
Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment frame Buildings
Download or read book Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment frame Buildings written by and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Policy Guide to Steel Moment frame Construction written by Ronald O. Hamburger and published by . This book was released on 2000 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Seismic Design Criteria for New Steel Moment frame Buildings written by SAC Joint Venture. Guidelines Development Committee and published by . This book was released on 2000 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Policy Guide to Steel Moment Frame Construction written by Federal Emergency Management Agency and published by Createspace Independent Pub. This book was released on 2013-03-16 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Northridge earthquake of January 17, 1994, caused widespread building damage throughout some of the most heavily populated communities of Southern California including the San Fernando Valley, Santa Monica and West Los Angeles, resulting in estimated economic losses exceeding $30 billion. Much of the damage sustained was quite predictable, occurring in types of buildings that engineers had previously identified as having low seismic resistance and significant risk of damage in earthquakes. This included older masonry and concrete buildings, but not steel framed buildings. Surprisingly, however, a number of modern, welded, steel, moment-frame buildings also sustained significant damage. This damage consisted of a brittle fracturing of the steel frames at the welded joints between the beams (horizontal framing members) and columns (vertical framing members). A few of the most severely damaged buildings could readily be observed to be out-of plumb (leaning to one side). However, many of the damaged buildings exhibited no outward signs of these fractures, making damage detection both difficult and costly. Then, exactly one year later, on January 17, 1995, the city of Kobe, Japan also experienced a large earthquake, causing similar unanticipated damage to steel moment-frame buildings. Prior to the 1994 Northridge and 1995 Kobe earthquakes, engineers believed that steel moment-frames would behave in a ductile manner, bending under earthquake loading, but not breaking. As a result, this became one of the most common types of construction used for major buildings in areas subject to severe earthquakes. The discovery of the potential for fracturing in these frames called to question the adequacy of the building code provisions dealing with this type of construction and created a crisis of confidence around the world. Engineers did not have clear guidance on how to detect damage, repair the damage they found, assess the safety of existing buildings, upgrade buildings found to be deficient or design new steel moment-frame structures to perform adequately in earthquakes. The observed damage also raised questions as to whether buildings in cities affected by other past earthquakes had sustained similar undetected damage and were now weakened and potentially hazardous. In response to the many concerns raised by these damage discoveries, the Federal Emergency Management Agency (FEMA) sponsored a program of directed investigation and development to identify the cause of the damage, quantify the risk inherent in steel structures and develop practical and effective engineering criteria for mitigation of this risk. As the project progressed, interim guidance documents were published to provide practicing engineers and the construction industry with important information on the lessons learned, as well as recommendations for investigation, repair, upgrade, and design of steel moment frame buildings. Many of these recommendations have already been incorporated into recent building codes. This project culminated with the publication of four engineering practice guideline documents. These four volumes include state-of-the-art recommendations that should be included in future building codes, as well as guidelines that may be applied voluntarily to assess and reduce the earthquake risk in our communities. This policy guide has been prepared to provide a nontechnical summary of the valuable information contained in the FEMA/SAC publications, an understanding of the risk associated with steel moment-frame buildings, and the practical measures that can be taken to reduce this risk. It is anticipated that this guide will be of interest to building owners and tenants, members of the financial and insurance industries, and to government planners and the building regulation community.
Download or read book Interim Guidelines written by and published by . This book was released on 1995 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Policy Guide to Steel Moment Frame Construction written by William J. Hall and published by DIANE Publishing. This book was released on 2008-07 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prior to the 1994 Northridge and 1995 Kobe earthquakes, engineers believed that steel moment-frames would bend under earthquake loading, but not break. As a result, this became one of the most common types of construction used for major bldgs. in areas subject to severe earthquakes. The discovery of the potential for fracturing in these frames called to question the adequacy of the building code provisions dealing with this type of construction and created a crisis of confidence. In response, FEMA issued this policy guide to provide a non-technical summary of valuable information, an understanding of the risk associated with steel moment-frame buildings, and the practical measures that can be taken to reduce this risk. Illustrations.
Download or read book Recommended Specifications and Quality Assurance Guidelines for Steel Moment frame Construction for Seismic Applications written by SAC Joint Venture. Guidelines Development Committee and published by . This book was released on 2000 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of FEMA Earthquake Resources written by United States. Federal Emergency Management Agency and published by FEMA. This book was released on 2013 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book STESSA 2003 Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by Routledge. This book was released on 2018-03-29 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of recent developments in the field of seismic resistant steel structures, this volume reports upon the latest progress in theoretical and experimental research into the area, and groups findings in the following key sections: · performance-based design of structures · structural integrity under exceptional loading · material and member behaviour · connections · global behaviour · moment resisting frames · passive and active control · strengthening and repairing · codification · design and application
Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o