Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways EAU 2004 written by Arbeitsausschuss and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1949 the "Committee for Waterfront Structures" has operated on honorary base as a committee of the Society for Harbour Engineering (HTG), Hamburg, and since 1951 also as working group of the German Society for Geotechnics (DGGT), Essen. Its full designation reads "Committee for Simplification an Standardization of Calculation and Construction of Waterfront Structures", which also outlines its goals. Following on from the previous joint publications, this new edition of EAU 2004 contains the safety concept with partial safety factors in accordance with the Eurocodes or the European prestandards as well as with the new edition of the corresponding German standard, partially differing on account of practice experiences. The recommendations continue to satisfy the requirements for international acknowledgement and application with regard to planning, design tendering, the awarding of contracts, building and building supervision. Further, the inspection and accounting procedures for harbour and waterway constructions are given from uniform points of view.

Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways EAU 2012 written by HTG and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "EAU 2012" takes into account the new generation of standards, which is shortly to be introduced into the building control system; it consists of Eurocode 7, the associated national application documents and additional national regulations (DIN 1054:2010). In certain cases, partial safety factors are determined differently based on experience in practice. This means that the safety standard of sea and port buildings remains in place; the recommendations nevertheless satisfy the requirements for international recognition and application regarding the planning, design, specification, tender procedure, construction and monitoring, as well as the handover of - and cost accounting for - port and waterway systems under uniform criteria.

Download or read book Flexible Dolphins written by Crow and published by CRC Press. This book was released on 2021-09-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Millions of breasting and mooring dolphins have been installed in inland waterways adjacent to jetties and waiting facilities for ship-to-ship transhipment or as crash barriers in commercial port areas throughout the world. A dolphin is a marine structure that is frequently installed in ports, waterways and other places related to marine traffic. Dolphins are typically located adjacent to waterfront structures such as quay walls, jetties, locks and bridge piers. The purpose of a dolphin is threefold: Allow ships to berth and moor safely and efficiently Protect waterfront structures by acting as a crash barrier and sacrificial structure Direct and guide marine traffic by acting as a lead-in dolphin and navigation aid The main objective of this handbook is to provide engineers, asset managers, suppliers, tender teams, contractors and principals with such guidance on the design and construction of flexible dolphins by collecting and describing knowledge of and experience with these flexible marine structures.This handbook is intended to prevent extensive discussions during the design and construction stages of projects involving flexible dolphins. It is part of a series of Dutch port infrastructure design recommendations that include the Quay Walls handbook and Jetties and Wharfs handbook.

Download or read book Handbook of Port and Harbor Engineering written by Gregory Tsinker and published by Springer. This book was released on 2014-11-14 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable handbook provides state-of-the-art information and common sense guidelines, covering the design, construction, modernization of port and harbor related marine structures. The design procedures and guidelines address the complex problems and illustrate factors that should be considered and included in appropriate design scenarios.

Download or read book Handbook of Quay Walls written by J.G. de Gijt and published by CRC Press. This book was released on 2005-09-12 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential knowledge for the planning, design, execution and maintenance of quay walls, plus general information about historic developments and lessons gained from observation of ports in various countries. Technical chapters are followed by a detailed calculation of a quay wall, based on semi-probabilistic design procedure, which applies the theory presented earlier. Quay Walls will interest anyone involved in the design, construction and use of quay walls, including designers, contractors, engineers, operators and managers. It also provides a rich source of basic information for students and professionals.

Download or read book Concrete Structures for Wind Turbines written by Jürgen Grünberg and published by John Wiley & Sons. This book was released on 2013-09-10 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wind energy industry in Germany has an excellent global standing when it comes to the development and construction of wind turbines. Germany currently represents the world's largest market for wind energy. The ongoing development of ever more powerful wind turbines plus additional requirements for the design and construction of their offshore foundation structures exceeds the actual experiences gained so far in the various disciplines concerned. This book gives a comprehensive overview for planning and structural design analysis of reinforced concrete and pre-stressed concrete wind turbine towers for both, onshore and offshore wind turbines. Wind turbines represent structures subjected to highly dynamic loading patterns. Therefore, for the design of loadbearing structures, fatigue effects - and not just maximum loads - are extremely important, in particular in the connections and joints of concrete and hybrid structures. There multi-axial stress conditions occure which so far are not covered by the design codes. The specific actions, the nonlinear behaviour and modeling for the structural analysis are explained. Design and verification with a focus on fatigue are adressed. The chapter Manufacturing includes hybrid structures, segmental construction of pre-stressed concrete towers and offshore wind turbine foundations. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.

Download or read book Recommendations on Excavations written by Deutsche Gesellschaft für Geotechnik and published by John Wiley & Sons. This book was released on 2003-11-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group for excavations at the German Society for Geotechnics (Deutsche Gesellschaft für Geotechnik) under the name EAB and are similar to a set of standards. All the main software programs in Germany are based on these recommendations. The recommendations help in designing and calculating excavation constructions, unifying approaches to loads and methods of calculation. Since they are based on an approved global safety concept, following these recommendations ensures the stability and usability of excavations and their individual components. Furthermore, they help to improve the profitability of excavation constructions. The result is a work of major importance for all experts concerned with the planning and calculation of excavations.

Download or read book International Books in Print written by and published by . This book was released on 1998 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Engineering Handbook written by and published by . This book was released on 2002 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 7th International Probabilistic Workshop written by Pieter van Gelder and published by Dirk Proske Verlag. This book was released on 2009 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Jetties and Wharfs written by CROW and published by CRC Press. This book was released on 2021-09-29 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: For centuries, jetties and wharfs have been designed and built around the world and play an important role in contemporary ports. The difference in the use of jetties, piers and wharfs is that jetties are frequently used for the transhipment and storage of light materials and ro-ro traffic, while piers are generally used for heavy loads like iron ore. That is why piers are mostly designed and constructed like quay walls (which are beyond the scope of this handbook). The designs were originally based on trial and error and the insights of those who dared to conquer local conditions, such as wind, waves, currents and soil composition. Design and construction techniques have since evolved into the designs we see on the coast or in river ports and seaports nowadays. The purpose of this handbook is to provide insight and guidelines regarding aspects that are important in the design of jetties and wharfs. Jetty-specific issues such as loads, interfaces between materials, installations on jetties and wharfs, as well as detailing aspects, are also covered. This handbook is part of a series of Dutch port infrastructure design recommendations that include the Quay Walls handbook and Flexible Dolphins handbook.

Download or read book River and Channel Revetments written by Manuela Escarameia and published by Thomas Telford. This book was released on 1998-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on the types of revetment available, and guidance on the choice and design of these systems. This manual includes information on revetments that incorporate some form of structural protection, and those which combine this protection with vegetation to increase the environmental quality of the systems. It is aimed at engineers.

Download or read book Cut and Cover Metro Structures written by Krishan Kaul and published by CRC Press. This book was released on 2010-04-08 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their complexity and scale, metro structures capture all the essential aspects of a cut-and-cover structure, and so are given primary focus in this book. The design of a metro construction is outlined coherently and in detail; and the reader is shown how to apply this design process equally well to other, relatively simple, cut-and-cover

Download or read book State of the art of Designing and Constructing Berm Breakwaters written by Maritime Navigation Commission. Working Group 40 and published by . This book was released on 2003 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Decoding Eurocode 7 written by Andrew Bond and published by CRC Press. This book was released on 2008-08-29 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decoding Eurocode 7 provides a detailed examination of Eurocode 7 Parts 1 and 2 and an overview of the associated European and International standards. The detail of the code is set out in summary tables and diagrams, with extensive. Fully annotated worked examples demonstrate how to apply it to real designs. Flow diagrams explain how reliability is introduced into design and mind maps gather related information into a coherent framework. Written by authors who specialise in lecturing on the subject, Decoding Eurocode 7 explains the key principles and application rules of Eurocode 7 in a logical and simple manner. Invaluable for practitioners, as well as for high-level students and researchers working in geotechnical fields.

Download or read book Guidelines for the Design of Fender Systems written by Maritime Navigation Commission. Working Group 33 and published by PIANC. This book was released on 2002 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the First Southern African Geotechnical Conference written by S.W. Jacobsz and published by CRC Press. This book was released on 2016-03-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Southern African Geotechnical Conference was organised by the Geotechnical Division of the South African Institution of Civil Engineering (SAICE) under the auspices of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) and took place at Sun City, South Africa on 5 and 6 May 2016. More than 60 papers were rec