Download or read book Recommendations for acceptance and applications of post tensioning systems written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1981-03-01 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Post Tensioned Concrete Principles and Practice Third Edition written by K. Dirk Bondy and published by Lulu.com. This book was released on 2017-08-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book combines history with academic notes for use at the university level, presenting design examples from actual jobs with applications and detailing for the practicing engineer. Chapter 1 tells the history of post-tensioned concrete as only Ken Bondy can tell it. Chapters 2-8 are the notes Dirk Bondy uses to teach Design of Prestressed Concrete Structures at UCLA and Cal Poly-San Luis Obispo. Chapters 9-13 are design examples that address many of the decisions faced by practicing engineers on typical projects. Chapters 13-14 cover the art of detailing and observing the construction of post-tensioned concrete. This knowledge was obtained over many years of working on our own projects and listening and learning from the the pioneers of post-tensioned concrete. Chapter 15 covers the slab on grade industry, which represents more sales of post-tensioning tendons than all other post-tensioning applications combined. Chapter 16 discusses the challenging application of post-tensioning-external post-tensioning.
Download or read book Recommendations for the acceptance of post tensioning systems written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1993-06-01 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Post tensioning Manual written by Post-Tensioning Institute and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acceptance of post tensioning systems for cryogenic applications written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2021-04-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the Second World War the demand of energy has undergone an exponential growth that has led to a sharp annual increase in the use of natural gas in both, cities and thermal power stations. Nowadays, the strategic relevance of natural gas as a main source of energy is evident with a contribution of more than 20% of the total world consumption. This development in increasing demand of natural gas has led for a need of suitable storage and transportation infrastructure. Various gases, especially hydrocarbons, are preferably stored in liquid form for transportation and storage since the phase transformation from gas to liquid comes with a significant reduction of the volume (e.g. up to 600 times). Gases can be liquefied by raising the pressure or by cooling to their boiling point, which for most gases is below 0°C. This is known as cryogenic storage. The term cryogenic is derived from two Greek words, namely kryos meaning icy-cold and genes which can be translated as shape. These fib recommendations are concerned about post-tensioning systems used in cryogenic tanks and have been formulated on the basis of actual available knowledge with the aim to reflect the current state of the art. Consequently, these recommendations have included a classification of the different cryogenic tanks typologies used in the past and nowadays, the associated different tendon types depending on their exposure to low temperature (e.g. never, only accidentally or during normal tank operation) and the testing regime required for acceptance of the materials and the post-tensioning system according to this document. An international working group comprising more than 20 experts from administrative authorities, universities, laboratories, owners, structural designers, suppliers of prestressing steels and post-tensioning systems suppliers have actively contributed in order to develop these recommendations. This text has been written to cover best construction practices around the world, and to provide material specifications which are considered to be the most advanced available at the time of preparing this text. For ease of use (for Owner, Designer and Post-tensioning System Supplier), the content has been arranged systematically according to the system components into chapters focusing on performance characteristics, requirements and acceptance criteria.
Download or read book Anchorage zones of prestressed concrete members state of the art report written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1987-04-01 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchorage Zone Reinforcement for Post tensioned Concrete Girders written by John Edward Breen and published by Transportation Research Board. This book was released on 1994 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations for Stay Cable Design Testing and Installation written by Post-Tensioning Institute. Committee on Cable-Stayed Bridges and published by . This book was released on 2001 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published in SI units, and re-organized into a Load and Resistance Factor Design (LRED) format, designed to be used with the AASHTO LRED Bridge Design Code.
Download or read book Qualification and approval of prestressing contractors and system suppliers written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1998-10-01 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete containments written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1978-06-01 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical construction written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1975-09-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and construction of prestressed concrete reactor vessels written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1978-03-01 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations for the design of flat slabs in post tension concrete using unbonded and bonded tendons written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1980-05-01 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: These recommendations present a guide to the design of two-way spanning, post-tensioned concrete flat slabs using unbonded or bonded tendons. Recommendations purely related to the use of unbonded tendons are clearly marked. These recommendations are intended only for the design of post-tensioned flat slabs in buildings and do not include the use in bridges. Post-tensioned concrete construction can be defined as unbonded or bonded, depending on whether the tendon ducts are filled with a cement grout (in order to provide a bonded structure) or whether the tendons are suitably coated and wrapped or greased and plastic covered (unbonded). While in a number of countries, (e.g., United States and Canada) economic and construction considerations have resulted in the selection of unbonded tendons, in other countries the use of the traditional bonded tendons is favoured, (e.g., Australia). Some of the advantages claimed for the use of unbonded tendons can be summarized as follows: Extremely low friction values, tendons are fully protected against corrosion during construction, maximum possible tendon drape due to the small diameter of the tendon; this is of major importance in slender structures such as flat plates, simple and fast placement of the tendons, avoidance of grouting operations. When tendons are grouted after stressing the claimed advantages are particularly that the bond between the concrete structure and the tendons increases the ultimate strength and less reliance is placed on the long-term adequacy of the anchorage.
Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.
Download or read book Congress written by Fédération internationale de la précontrainte and published by . This book was released on 1967 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2022 fib Awards for Outstanding Concrete Structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2022-06-15 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.
Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
