Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways EAU 2004 written by Arbeitsausschuss and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1949 the "Committee for Waterfront Structures" has operated on honorary base as a committee of the Society for Harbour Engineering (HTG), Hamburg, and since 1951 also as working group of the German Society for Geotechnics (DGGT), Essen. Its full designation reads "Committee for Simplification an Standardization of Calculation and Construction of Waterfront Structures", which also outlines its goals. Following on from the previous joint publications, this new edition of EAU 2004 contains the safety concept with partial safety factors in accordance with the Eurocodes or the European prestandards as well as with the new edition of the corresponding German standard, partially differing on account of practice experiences. The recommendations continue to satisfy the requirements for international acknowledgement and application with regard to planning, design tendering, the awarding of contracts, building and building supervision. Further, the inspection and accounting procedures for harbour and waterway constructions are given from uniform points of view.
Download or read book Recommendations of the Committee for Waterfront Structures written by Arbeitsausschuss "Ufereinfassungen" (Germany) and published by VCH. This book was released on 1986 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways written by HTG and published by John Wiley & Sons. This book was released on 2015-11-09 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "EAU 2012" takes into account the new generation of standards, which is shortly to be introduced into the building control system; it consists of Eurocode 7, the associated national application documents and additional national regulations (DIN 1054:2010). In certain cases, partial safety factors are determined differently based on experience in practice. This means that the safety standard of sea and port buildings remains in place; the recommendations nevertheless satisfy the requirements for international recognition and application regarding the planning, design, specification, tender procedure, construction and monitoring, as well as the handover of - and cost accounting for - port and waterway systems under uniform criteria.
Download or read book EAU 1980 written by Arbeitsausschuss "Ufereinfassungen" (Germany) and published by . This book was released on 1982 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designers Guide to Eurocode 7 Geotechnical Design written by Roger Frank and published by Thomas Telford. This book was released on 2004-11-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.
Download or read book Geotechnical Design to Eurocode 7 written by Trevor L.L. Orr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to explain the philosophy set out in Eurocode 7, the new European code of practice for geotechnical design, and, by means of series of typical examples, to show how this philosophy is used in practice. This book is aimed at: • practising engineers, to assist them to carry out geotechnical designs to Eurocode 7 using the limit state design method and partial factors; • lecturers and students on courses where design to Eurocode 7 is being taught. It is envisaged that practising engineers, using this book to assist them carry out geotechnical designs to Eurocode 7, will have access to the prestandard version of Eurocode 7, ENV 1997 -I, so the authors have concentrated on the main principles and have not provided a commentary on all the clauses. However sufficient detail has been included in the book to enable it to be used on its own by those learning the design principles who may not have access to Eurocode 7. For example, the values of the partial factors and the principal equations given in Eurocode 7 have been included and these are used in the design examples in this book. To assist the reader, the numbering, layout and titles of the chapters closely follow those presented in Eurocode 7.
Download or read book Deep Excavations written by Malcolm Puller and published by Thomas Telford. This book was released on 2003 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book assembles the practical rules and details for the efficient and economical execution of deep excavations. It draws together a wealth of experience of both design and construction from published work and the lifetime practice of the author. This second edition is extensively revised to include changes in design emphasis including those due to Eurocode 7 and descriptions of the latest equipment, construction techniques and geotechnical processes. Additional details include those of the latest piling and diaphragm wall equipment and innovations in top-down construction applied to basements and cut-and-cover works. The section on caissons has been expanded to include design methods."--BOOK JACKET.
Download or read book Handbook of Port and Harbor Engineering written by Gregory Tsinker and published by Springer. This book was released on 2014-11-14 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable handbook provides state-of-the-art information and common sense guidelines, covering the design, construction, modernization of port and harbor related marine structures. The design procedures and guidelines address the complex problems and illustrate factors that should be considered and included in appropriate design scenarios.
Download or read book Geotechnical Hazards written by Z. Lisac and published by CRC Press. This book was released on 2020-12-18 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this volume examine: geotechnical hazard acknowledging the deversity of local ground conditions and environmental factors which play a decisive role in designing engineering structures in Danubian countries.
Download or read book Concrete in Coastal Structures written by Richard Thomas Lingen Allen and published by Thomas Telford. This book was released on 1998 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the nature of the marine environment and the effects of man-made structures on the behaviour of the sea, this books deals with hydraulic design, the material properties of concrete and the design and specification of structures for coastal environments.
Download or read book Proceedings written by Institution of Civil Engineers (Great Britain) and published by . This book was released on 1991-08 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Marine Facilities for the Berthing Mooring and Repair of Vessels written by John Gaythwaite and published by Springer. This book was released on 1990 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design Guidelines for Port Structures written by International Navigation Association Brussels and published by CRC Press. This book was released on 2002-01-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, international guidelines for seismic design of port structures have been compiled in this comprehensive book. These guidelines address the limitations inherent in conventional design, and establish the framework for an evolutionary design strategy based on seismic response and performance requirements. The provisions reflect the diverse nature of port facilities throughout the world, where the required functions of port structures, economic and social environment, and seismic activities may differ from region to region. This book comprises a main text and eight technical commentaries. The main text introduces the reader to basic earthquake engineering concepts and a strategy for performance-based design, while the technical commentaries illustrate specific aspects of seismic analysis and design, and provide examples of various applications of the guidelines. Proven simplified methods and state-of-the-art analysis procedures have been carefully selected and integrated in the guidelines in order to provide a flexible and consistent methodology for the seismic design of port facilities.
Download or read book Planning and Design of Ports and Marine Terminals written by Hans Agerschou and published by Thomas Telford. This book was released on 2004 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a collection of eminent figures in the field, this new edition continues to look at the rational planning for port facilities requirements (berths, storage and cargo handling equipment), organisations, management and operations with relation to planning and design of ports and marine terminals.
Download or read book Marine Structures Engineering Specialized Applications written by Gregory Tsinker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Structures Engineering is designed to help engineers meet the growing worldwide demand for construction of new ports and the modernization of existing ports and terminals. It provides an authoritative guide to the design, construction, rehabilitation, repair, and maintenance of port and harbor structures. Each chapter is self-contained, allowing readers to access specific information. The Author draws on his extensive experience in offshore structure and port engineering to demonstrate evaluation, rehabilitation, repair, and maintenance of in-service marine structures. Also covered in detail are state-of-the-art approaches to: *marine structures in cold regions, with special attention to the role of ice loads, permafrost, and other ice effects *shiplifts, marine railways, shipways, and dry docks *offshore moorings *floating breakwaters *marinas *structures that protect bridge piers from ship impact. Offering practical information on all aspects of marine structures, this book serves as an indispensable resource to all engineers and professionals involved in design, construction, maintenance, and modernization of ports and harbors.
Download or read book Port Engineering written by Per Bruun and published by Gulf Professional Publishing. This book was released on 1989 with total page 1488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume examines port economics, port navigation safety, and harbor hydraulics. It supplies you with descriptions of new findings in breakwater engineering, modeling techniques, marine structures and foundations, and terminal construction.
