Download or read book Recent DIII D Divertor Research written by and published by . This book was released on 1995 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: DIII-D currently operates with a single- or double-null open divertor and graphite walls. Active particle control with a divertor cryopump has demonstrated density control, efficient helium exhaust, and reduction of the inventory of particles in the wall. Gas puffing of D2 and impurities has demonstrated reduction of the peak divertor beat flux by factors of 3--5 by radiation. A combination of active cryopumping and feedback-controlled D2 gas puffing has produced similar divertor heat flux reduction with density control. Experiments with neon puffing have shown that the radiation is equally-divided between a localized zone near the X-point and a mantle around the plasma core. The density in these experiments has also been controlled with cryopumping. These experimental results combined with modeling were used to develop the new Radiative Divertor for DIII-D. This is a double-null slot divertor with four cryopumps to provide particle control and neutral shielding for high-triangularity advanced tokamak discharges. UEDGE and DEGAS simulations, benchmarked to experimental data, have been used to optimize the design.
Download or read book Divertor Research on the DIII D Tokamak written by and published by . This book was released on 1994 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Divertor plasma Studies on DIII D written by and published by . This book was released on 1990 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents an overview of recent results from divertor physics studies in DIII-D. Heat flux measurements at input power levels up to 20 MW show that steady divertor heat loads of up to 4 MW/m2 are obtained in H-mode discharges with ELMs. No carbon blooms are observed. The heat flux profile is highly peaked at the outside strike point in single-null discharges, and is up/down asymmetric in double-null discharges. Recent experiments with gas injection below the X-point have demonstrated a factor of two reduction in the peak divertor heat flux for H-mode plasmas at these power levels. These heat flux data, along with measurements of the n{sub e} and T{sub e} profiles at the divertor are being used to help interpret the first reported measurements of the erosion profile for a set of graphite divertor tiles exposed to several months of high power tokamak operation. We have now modified the divertor hardware in order to carry out experiments with divertor biasing, baffling, and pumping. 26 refs., 8 figs.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Diagnostics for the DIII D Divertor Upgrade written by and published by . This book was released on 1990 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DIII-D tokamak is being upgraded to allow for divertor biasing, baffling, and pumping experiments. This paper gives an overview of the new diagnostics added to DIII-D as part of this Advanced Divertor Program. They include tile current monitors, fast reciprocating Langmuir probes, a fixed probe array in the divertor, fast neutral pressure gauges, and H{sub {alpha}} measurements with TV cameras and fiber optics coupled to a high resolution spectrometer. 9 refs.
Download or read book Engineering Installation Testing and Initial Operation of the DIII D Advanced Divertor written by and published by . This book was released on 1990 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Divertor (AD) for General Atomics tokamak, DIII-D, was installed in the summer of 1990. The AD has enabled two classes of physics experiments to be run: divertor biasing and divertor baffling. Both are new experiments for DIII-D. The AD has two principal components: (1) a continuous ring electrode; and (2) a toroidally symmetric baffle. The tokamak can be run in bias baffle or standard DIII-D divertor modes by accurate positioning of the outer divertor strike point through the use of the DIII-D control system. The paper covers design, analysis, fabrication, installation, instrumentation, testing, initial operation, and future plans for the Advanced Divertor from an engineering viewpoint. 2 refs., 5 figs.
Download or read book Results of DIII D Operation with New Enabling Technologies written by and published by . This book was released on 1997 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent experiments on DIII-D have been carried out to understand and explore optimized tokamak operating modes by exploiting control of the plasma current and pressure profiles using new RF current drive and divertor technology. DIII-D emphasizes plasma shape and divertor experiments using a digital plasma control system and extensive diagnostics to develop improved understanding and control of transport barriers in high performance plasmas. The emphasis of the program is to extend the duration of high performance operating modes beyond the plasma current relaxation time by using ICRF and ECH current drive. Engineering features of the new RF systems being developed for these experiments as well as new divertor results are described. DIII-D employs multi-element ICRF antennas for fast-wave electron heating and on-axis current drive and is beginning 110 GHz ECH experiments with MW-level gyrotrons for off-axis current drive. DIII-D employs active cryogenic divertor neutral particle pumping for plasma density and plasma pressure profile control. A divertor modification is now being implemented on DIII-D to pump higher triangularity plasmas and to better baffle neutral backflow from the recycling divertor region.
Download or read book Advances in Hydrogen Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Hydrogen Research and Application / 2012 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about Hydrogen in a concise format. The editors have built Advances in Hydrogen Research and Application / 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Hydrogen in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Hydrogen Research and Application / 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Energy and Water Development Appropriations for 2018 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2017 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Physics and Controlled Nuclear Fusion Research written by and published by . This book was released on 1992 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion energy program written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Investigations and Oversight and published by . This book was released on 1990 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book written by and published by . This book was released on 1919 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology 1990 written by B.E. Keen and published by Elsevier. This book was released on 2012-12-02 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the biennial series of symposia on Fusion Technology, organized by the European Fusion Laboratories, is the exchange of information on the design, construction and operation of fusion experiments. The coverage of the volume includes the technology aspects of fusion reactors to provide a link to the technology of new developments and form a guideline for the definition of future work. These proceedings comprise two volumes and contain both the invited lectures and contributed papers presented at the Symposium, which was attended by 556 participants from around the globe. The 312 papers in this volume, including 17 invited papers, give a broad and current overview of the progress and trends fusion technology is experiencing now, and the future for fusion devices.
Download or read book A Comprehensive 2 D Divertor Data Set from DIII D for Edge Theory Validation written by and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive set of experiments has been carried out on the DIII-D tokamak to measure the 2-D (R, Z) structure of the divertor plasma in a systematic way using new diagnostics. Measurements cover the divertor radially from inside the X-point to the outer target plate and vertically from the target plate to above the X-point. Identical, repeatable shots were made, each having radial sweeps of the X-point and divertor strike points, to allow complete plasma and radiation profile measurements. Data have been obtained in ohmic, L-mode, ELMing H-mode, and reversed B{sub T} operation ((nabla)B drift away from the X-point). In addition, complete measurements were made of radiative divertor plasmas with a Partially Detached Divertor (PDD) induced by D2 injection and with a Radiating Mantle induced by Impurity injection (RMI) using neon and nitrogen. The data set includes first observations of the radial and poloidal profiles of the X-point, inner and outer leg plasmas in PDD and RMI radiative divertor operation. Preliminary data analysis shows that intrinsic impurities play a critical role in determining the SOL and divertor conditions.
Download or read book New Ideas in Tokamak Confinement written by Marshall N. Rosenbluth and published by Springer Science & Business Media. This book was released on 1997-05-08 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market: Scientists and students involved in thermonuclear fusion research. Thermonuclear fusion research using the confinement device tokamak represents one of the most prominent science projects in the second half of the 20th century. International Tokamak Community is now committing significant effort and funds to experiments with burning plasma, hot and dense enough to produce significant nuclear fusion reactions. The methods used to enhance tokamak performance have a profound and immediate effect on machine design. This book provides an up-to-date account of research in tokamak fusion and puts forward innovative ideas in confinement physics.
Download or read book The Department of Energy s Restructured Fusion Energy Sciences Program written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1996 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
