Download or read book Recent Developments in Thermomechanics of Solids written by G. Lebon and published by Springer. This book was released on 2014-10-08 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.
Download or read book Recent Developments in Thermomechanics of Solids written by G. Lebon and published by Springer. This book was released on 2014-05-04 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.
Download or read book New Achievements in Continuum Mechanics and Thermodynamics written by Bilen Emek Abali and published by Springer. This book was released on 2019-03-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a liber amicorum dedicated to Wolfgang H. Müller, and highlights recent advances in Prof. Müller’s major fields of research: continuum mechanics, generalized mechanics, thermodynamics, mechanochemistry, and geomechanics. Over 50 of Prof. Müller’s friends and colleagues contributed to this book, which commemorates his 60th birthday and was published in recognition of his outstanding contributions.
Download or read book Thermomechanics of Solids and Structures written by Marko Canadija and published by Elsevier. This book was released on 2023-04-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanics of Solids and Structures: Physical Mechanisms, Continuum Mechanics, and Applications covers kinematics, balance equations, the strict thermodynamic frameworks of thermoelasticity, thermoplasticity, creep covering constitutive equations, the physical mechanisms of deformation, along with computational aspects. The book concludes with coverage of the thermodynamics of solids and applications of the constitutive three-dimensional model to both one-dimensional homogeneous and composite beam structures. Practical applications of the theories and techniques covered are emphasized throughout the book, with analytical solutions provided for various problems. Provides foundational knowledge on continuum mechanics, covering kinematics, balance equations, isothermal elasticity and plasticity, variational principles, and more Presents applications of constitutive 3D models to homogeneous and composite beams, including equations for stress and displacement estimation in thermoelastic beam problems Reviews experimental results of thermoelastic material behavior, along with case studies to support reviews Covers the inelastic behavior of materials at elevated temperatures, with experimental results for both monotonic and cyclic tensile tests presented Looks at the physical mechanisms, experimental results, and constitutive modeling of creep
Download or read book Thermodynamics Diffusion and the Kirkendall Effect in Solids written by Aloke Paul and published by Springer. This book was released on 2014-07-16 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book basic and some more advanced thermodynamics and phase as well as stability diagrams relevant for diffusion studies are introduced. Following, Fick’s laws of diffusion, atomic mechanisms, interdiffusion, intrinsic diffusion, tracer diffusion and the Kirkendall effect are discussed. Short circuit diffusion is explained in detail with an emphasis on grain boundary diffusion. Recent advances in the area of interdiffusion will be introduced. Interdiffusion in multi-component systems is also explained. Many practical examples will be given, such that researches working in this area can learn the practical evaluation of various diffusion parameters from experimental results. Large number of illustrations and experimental results are used to explain the subject. This book will be appealing for students, academicians, engineers and researchers in academic institutions, industry research and development laboratories.
Download or read book Mechanics of Solids with Phase Changes written by M. Berveiller and published by Springer. This book was released on 2014-05-04 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is mainly devoted to the thermomechanical behavior of materials during solid-solid phase transformations. The physical mechanisms including diffusion, martensitic transformation and plasticity are described from material science point of view. The global behaviour is deduced from methods of classical as well as irreversible thermodynamics and continuum and micro mechanics. Mainly metals, both non ferrous and ferrous alloys but also geological problems are dealt with. Special attention is given to transformation induced plasticity and shape memory alloys. Three chapters are concerned with practical applications (heat treatment, smart structures, residual stresses).
Download or read book Thermal Analysis and Thermodynamic Properties of Solids written by Jaroslav Sestak and published by Elsevier. This book was released on 2021-08-09 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis and Thermodynamic Properties of Solids, Second Edition covers foundational principles and recent updates in the field, presenting an authoritative overview of theoretical knowledge and practical applications across several fields. Since the first edition of this book was published, large developments have occurred in the theoretical understanding of—and subsequent ability to assess and apply—principles of thermal analysis. Drawing on the knowledge of its expert author, this second edition provides fascinating insight for both new and experienced students, researchers, and industry professionals whose work is influenced or impacted by thermo analysis principles and tools. Part 1 provides a detailed introduction and guide to theoretical aspects of thermal analysis and the related impact of thermodynamics. Key terminology and concepts, the fundamentals of thermophysical examinations, thermostatics, equilibrium background, thermotics, reaction kinetics and models, thermokinetics and the exploitation of fractals are all discussed. Part 2 then goes on to discuss practical applications of this theoretical information to topics such as crystallization kinetics and glass states, thermodynamics in superconductor models, and climate change. Includes fully updated as well as new chapters on kinetic phase diagrams, thermokinetics in DTA experiments, and crystallization kinetics Discusses the influence of key derivatives such as thermostatics, thermodynamics, thermotics, and thermokinetics Helps readers understand and describe reaction kinetics in solids, both in terms of simplified descriptions of the reaction mechanism models and averaged descriptions using fractals
Download or read book Transport Phenomena and Drying of Solids and Particulate Materials written by J.M.P.Q. Delgado and published by Springer. This book was released on 2014-06-20 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book, Transport Phenomena and Drying of Solids and Particulate Materials, is to provide a collection of recent contributions in the field of heat and mass transfer, transport phenomena, drying and wetting of solids and particulate materials. The main benefit of the book is that it discusses some of the most important topics related to the heat and mass transfer in solids and particulate materials. It includes a set of new developments in the field of basic and applied research work on the physical and chemical aspects of heat and mass transfer phenomena, drying and wetting processes, namely, innovations and trends in drying science and technology, drying mechanism and theory, equipment, advanced modelling, complex simulation and experimentation. At the same time, these topics will be going to the encounter of a variety of scientific and engineering disciplines. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.
Download or read book Finite Element Analysis written by David W. Nicholson and published by CRC Press. This book was released on 2003-03-26 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element modeling has developed into one of the most important tools at an engineer's disposal, especially in applications involving nonlinearity. While engineers coping with such applications may have access to powerful computers and finite element codes, too often they lack the strong foundation in finite element analysis (FEA) that nonline
Download or read book Small Systems and Fundamentals of Thermodynamics written by Yu. K. Tovbin and published by CRC Press. This book was released on 2018-07-17 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small systems are a very active area of research and development due to improved instrumentation that allows for spatial resolution in the range of sizes from one to 100 nm. In this size range, many physical and chemical properties change, which opens up new approaches to the study of substances and their practical application. This affects both traditional fields of knowledge and many other new fields including physics, chemistry, biology, etc. This book highlights new developments in statistical thermodynamics that answer the most important questions about the specifics of small systems - when one cannot apply equations or traditional thermodynamic models.
Download or read book Finite Element Analysis written by David W. Nicholson and published by CRC Press. This book was released on 2008-04-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a Unified Treatment of the Finite Element Method The finite element method has matured to the point that it can accurately and reliably be used, by a careful analyst, for an amazingly wide range of applications. With expanded coverage and an increase in fully solved examples, the second edition of Finite Element Analysis: Thermomechanics of Solids presents a unified treatment of the finite element method in theremomechanics, from the basics to advanced concepts. An Integrated Presentation of Critical Technology As in the first edition, the author presents and explicates topics in a way that demonstrates the highly unified structure of the finite element method. The presentation integrates continuum mechanics and relevant mathematics with persistent reliance on variational and incremental-variational foundations. The author exploits matrix-vector formalisms and Kronecker product algebra to provide transparent and consistent notation throughout the text. Nearly twice as long as the first edition, this second edition features: § Greater integration and balance between introductory and advanced material § Increased number of fully solved examples § Selected developments in numerical methods, detailing accelerating computations in eigenstructure extraction, time integration, and stiffness matrix triangularization § More extensive coverage of the arc length method for nonlinear problems § Expanded and enhanced treatment of rotating bodies and buckling Provides Sophisticated Understanding of Capabilities and Limitations This new edition of a popular text includes significant illustrative examples and applications, modeling strategies, and explores a range of computational issues. Written by a professor with years of practical engineering and instructional experience, the book provides a strong foundation for those requiring a sophisticated understanding of the method’s capabilities and limitations.
Download or read book Tensor Properties of Solids written by Richard F. Tinder and published by Morgan & Claypool Publishers. This book was released on 2008 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensor Properties of Solids presents the phenomenological development of solid state properties represented as matter tensors in two parts: Part I on equilibrium tensor properties and Part II on transport tensor properties. Part I begins with an introduction to tensor notation, transformations, algebra, and calculus together with the matrix representations. Crystallography, as it relates to tensor properties of crystals, completes the background treatment. A generalized treatment of solid-state equilibrium thermodynamics leads to the systematic correlation of equilibrium tensor properties. This is followed by developments covering first-, second-, third-, and higher-order tensor effects. Included are the generalized compliance and rigidity matrices for first-order tensor properties, Maxwell relations, effect of measurement conditions, and the dependent coupled effects and use of interaction diagrams. Part I concludes with the second- and higher-order effects, including numerous optical tensor properties. Part II presents the driving forces and fluxes for the well-known proper conductivities. An introduction to irreversible thermodynamics includes the concepts of microscopic reversibility, Onsager's reciprocity principle, entropy density production, and the proper choice of the transport parameters. This is followed by the force-flux equations for electronic charge and heat flow and the relationships between the proper conductivities and phenomenological coefficients. The thermoelectric effects in solids are discussed and extended to the piezothermoelectric and piezoresistance tensor effects. The subjects of thermomagnetic, galvanomagnetic, and thermogalvanomagnetic effects are developed together with other higher-order magnetotransport property tensors. A glossary of terms, expressions, and symbols are provided at the end of the text, and end-of-chapter problems are provided on request. Endnotes provide the necessary references for further reading.
Download or read book Recent Advances in Solids and Structures written by and published by . This book was released on 1999 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Classical And Computational Solid Mechanics Second Edition written by Yuen-cheng Fung and published by World Scientific Publishing Company. This book was released on 2017-05-25 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition provides an update of the recent developments in classical and computational solid mechanics. The structure of the book is also updated to include five new areas: Fundamental Principles of Thermodynamics and Coupled Thermoelastic Constitutive Equations at Large Deformations, Functional Thermodynamics and Thermoviscoelasticity, Thermodynamics with Internal State Variables and Thermo-Elasto-Viscoplasticity, Electro-Thermo-Viscoelasticity/Viscoplasticity, and Meshless Method. These new topics are added as self-contained sections or chapters. Many books in the market do not cover these topics.This invaluable book has been written for engineers and engineering scientists in a style that is readable, precise, concise, and practical. It gives the first priority to the formulation of problems, presenting the classical results as the gold standard, and the numerical approach as a tool for obtaining solutions.
Download or read book Alternate Developments of the Thermomechanical Equations for Thermoviscoelastic Solids written by Thomas L. Cost and published by . This book was released on 1971 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: The constitutive equations required to analyze the behavior of thermorheologically simple materials in which thermomechanical coupling effects are of interest are derived from three different viewpoints. The theory of irreversible thermodynamics developed by Biot, the rational mechanics approach developed by Coleman, and a phenomenological model approach described by Staverman and Schwarzl are each used to obtain the energy equation, including the dissipation function, for thermoviscoelastic materials. Although the approaches are considerably different, the results are shown to be practically equivalent. (Author).
Download or read book Thermomechanics of Continua written by Krzysztof Wilmanski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notion of continuum thermodynamics, adopted in this book, is primarily understood as a strategy for development of continuous models of various physical systems. The examples of such a strategy presented in the book have both the classical character (e. g. thermoelastic materials, viscous fluids, mixtures) and the extended one (ideal gases, Maxwellian fluids, thermoviscoelastic solids etc. ). The latter has been limited intentionally to non-relativistic models; many important relativistic applications of the true extended thermodynamics will not be considered but can be found in the other sources. The notion of extended thermodynamics is also adopted in a less strict sense than suggested by the founders. For instance, in some cases we allow the constitutive dependence not only on the fields themselves but also on some derivatives. In this way, the new thermodynamical models may have some features of the usual nonequilibrium models and some of those of the extended models. This deviation from the strategy of extended thermodynamics is motivated by practical aspects; frequently the technical considerations of extended thermodynamics are so involved that one can no longer see important physical properties of the systems. This book has a different form from that usually found in books on continuum mechanics and continuum thermodynamics. The presentation of the formal structure of continuum thermodynamics is not always as rigorous as a mathematician might anticipate and the choice of physical subjects is too disperse to make a physicist happy.
Download or read book Recent Developments in Micromechanics written by D.R. Axelrad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures presented at the mini-symposium on "Micromechanics" held in conjunction with the CSME Mechanical Engineer ing Forum 1990 between the 3rd and 8th June, 1990 at the University of Toronto, Canada. The expressed purpose of this symposium was to discuss some recent developments in the Micromechanics of Materials and how ad vances in this field now relate to the solution of practical engineer ing problems. Due to the time limit set for this section of the Engineer ing Forum as well as the restriction on the number of papers to be pre sented, it was not possible to cover a much wider range of topics. How ever, an attempt was made to include the most important advances asso ciated with the progress made in micromechanics in its application to material science and engineering over the past decade. Thus, the topics are concerned with: the fundamental aspects of the thermodynamics of structured solids (part I), - the micromechanical behaviour of alloys (part II), - the modelling of the material behaviour on the basis of continuum theory (part III), and finally the important new approach to the characterization of various mate rials and their responses to external agencies by the use of proba bilistic micromechanics (part IV). We would like to take this opportunity to thank the Chairman of the Organizing Committee, Prof. F. P. J. Rimrott, and the President of the CSME, Prof. T. S.
