Download or read book Recent Developments in Building Construction Technology written by Mohammad Arif Kamal and published by Eliva Press. This book was released on 2021-08-02 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conventional building construction systems are primarily cast in-situ slow paced construction systems. The technological progress has introduced many innovations in the field of construction industry. In recent years, the building construction industry is continuously being updated and upgraded with the latest technologies to improve the cost, safety, efficiency, and quality of construction. Technology adds significant value at every stage of construction, from planning to the commission, by optimizing efficiency and productivity. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials, building technology and their applications, building design procedures, quantity surveying, structural analysis and design, the functioning of building components and systems, procedures and details of building assembly and so on. In the rapidly changing scenario of the building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefit energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various building construction materials and technologies are of prime concern. Therefore, it is judicious to adopt new construction systems which ensure quick delivery of quality building structures without compromising functional and structural requirements. This book 'Recent Developments in Building Construction Technology' contains Five chapters that introduces and discusses some state-of-the-art building technologies and scientific methods that may be beneficial to architects, engineers, building scientists and construction industry professionals.
Download or read book Advances and Technologies in Building Construction and Structural Analysis written by Alireza Kaboli and published by BoD – Books on Demand. This book was released on 2021-12-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Edited Volume “Advances and Technologies in Building Construction and Structural Analysis” is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of advances and technologies in building construction and structural analysis. The book comprises single chapters authored by various researchers and edited by an expert active in the alternative medicine research area. All chapters are complete in themselves but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on advances and technologies in building construction and structural analysis and opening new possible research paths for further novel developments.
Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. - Provides a framework for analyzing sustainable construction technologies and economic viability - Introduces key credit criteria for different sustainable construction technologies - Covers the most relevant construction areas - Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings - Analyzes international rating systems and provides supporting case studies
Download or read book Advances in Building Construction Technology written by Mohammad Arif Kamal and published by . This book was released on 2021-04-20 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction technology is concerned with the technical performance of buildings, building materials, and building construction systems. Technological progress has introduced many innovations in the field of construction industry. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly; operating strategies and so on. The adoption of advanced construction technology requires an appropriate design, commitment from the whole project team, suitable procurement strategies, good quality control, appropriate training and careful commissioning. There is a difference between new and old traditional construction methods. The use of machinery and automation has made its way through the civil engineering and construction industry. Most of the building components such as columns, roofs and concrete blocks are available as prefabricated forms that increase the speed of construction process greatly. In the rapidly changing scenario of building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefits like energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various technologies are of prime concern. This book 'Advances in Building Construction Technology' contains six chapters which introduces various scientific methods and state-of-the-art building constriction technologies and systems that may be beneficial to architects, engineers, building scientists and construction industry professionals.
Download or read book Recent Trends in Construction Technology and Management written by M. S. Ranadive and published by Springer Nature. This book was released on 2022-09-27 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Advances in Construction Technology and Management (ACTM 2021) and explores recent and innovative developments in all aspects of civil engineering. Advanced construction technologies such as 3D printing, intelligently built environment, use of artificial intelligence, smart structures, green buildings, advanced and engineered materials for producing green concrete, and many more such topics are covered in this book. The advanced management tools such as building information modeling, augmented reality, advanced task management software, and one of the most recent technological advancements are drones, which are changing the face of surveying and security are also explored. This book will be useful for researchers, academicians, and practitioners working in the area of civil engineering and allied fields.
Download or read book Building Construction and Technology written by Vijayalaxmi J. and published by Springer Nature. This book was released on 2023-07-24 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights various aspects of building construction industry based on data from field studies. It discusses the challenges, methodologies, technological applications in building construction, technology, and management. The book presents new approaches to effective building construction and an understanding of the impact of applications of latest technologies. This book is aimed at researchers and professionals in civil engineering and building engineering management to assist in understanding the domain along with recent applications, the advantages, and practical limitations through real-life case studies. This book is useful for building engineers in understanding the effective use of technology, construction methods, and project delivery systems.
Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.
Download or read book Architectural and Building Construction Technology written by United States. Office of Education and published by . This book was released on 1969 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Structural Engineering and Construction Management written by Kong Kian Hau and published by Springer Nature. This book was released on 2022-09-27 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Structures, Materials and Construction (ICSMC 2021). It covers the recent developments and futuristic trends in the field of structural engineering and construction management, including new building materials and understanding their behavior. The topic covered also assess the current progress and state-of-the-art techniques in structural experimentation, smart materials, structures technology, principles of construction management, materials properties and characterization. The collection of papers included in this proceeding will contribute to scientific developments in the field of structural engineering and construction and will be a useful as reference material for the academicians, researchers and most importantly the student community pursuing research in the fields of structural engineering and construction technology.
Download or read book Fundamentals of Building Construction written by Edward Allen and published by John Wiley & Sons. This book was released on 2019-10-15 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE #1 REFERENCE ON BUILDING CONSTRUCTION—UPDATED FROM THE GROUND UP Edward Allen and Joseph Iano’s Fundamentals of Building Construction has been the go-to reference for thousands of professionals and students of architecture, engineering, and construction technology for over thirty years. The materials and methods described in this new Seventh Edition have been thoroughly updated to reflect the latest advancements in the industry. Carefully selected and logically arranged topics—ranging from basic building methods to the principles of structure and enclosure—help readers gain a working knowledge of the field in an enjoyable, easy-to-understand manner. All major construction systems, including light wood frame, mass timber, masonry, steel frame, light gauge steel, and reinforced concrete construction, are addressed. Now in its Seventh Edition, Fundamentals of Building Construction contains substantial revisions and updates. New illustrations and photographs reflect the latest practices and developments in the industry. Revised chapters address exterior wall systems and high-performance buildings, an updated and comprehensive discussion of building enclosure science, evolving tools for assessing environmental and health impacts of building materials, and more. New and exciting developments in mass timber construction are also included. This Seventh Edition includes: 125 new or updated illustrations and photographs, as well as 40 new photorealistic renderings The latest in construction project delivery methods, construction scheduling, and trends in information technology affecting building design and construction Updated discussion of the latest LEED and Living Building Challenge sustainability standards along with expanded coverage of new methods for assessing the environmental impacts of materials and buildings Expanded coverage of mass timber materials, fire resistance of mass timber, and the design and construction of tall wood buildings Revised end-of-chapter sections, including references, websites, key terminology, review questions, and exercises Fully-updated collection of best-in-class ancillary materials: PowerPoint lecture slides, Instructor’s Manual, Test Bank, Interactive Exercises, and more Companion book, Exercises in Building Construction, available in print and eBook format For the nuts and bolts on building construction practices and materials, Fundamentals of Building Construction: Materials and Methods, 7th Edition lays the foundation that every architect and construction professional needs to build a successful career.
Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2009 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings. The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This third edition also includes several new topics not covered in the previous edition.
Download or read book Technological Advancements in Building Construction written by Mohammad Arif Kamal and published by Eliva Press. This book was released on 2021-06-19 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological progress has introduced many innovations in the field of the construction industry. In recent years, the building construction industry is continuously being updated and upgraded with the latest technologies to improve the cost, safety, efficiency, and quality of construction. Construction is essentially the process of moving and assembling materials and equipment into a completed, operational facility. Technology adds significant value at every stage of construction, from planning to the commission, by optimizing efficiency and productivity. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly and so on. New advanced materials offer opportunities to change how we construct and retrofit buildings. They give added value in terms of increased performance and functionality. The use of machinery and automation has made its way through the civil engineering, architectural and construction industries. In the rapidly changing scenario of the building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefit energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various building construction technologies are of prime concern. This book 'Technological Advancements in Building Construction' contains Six chapters that introduce some scientific methods and state-of-the-art building technologies that may be beneficial to architects, engineers, building scientists and construction industry professionals.
Download or read book Construction Technology written by Tony Bryan and published by John Wiley & Sons. This book was released on 2015-09-14 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Construction Technology: Analysis and Choice has been expanded to include commercial buildings. This now covers, in a single textbook, all the basic forms of construction studied on professional courses. The book takes as its theme the process of choice: what the expert has to know and how he/she might think through the decisions to be made about the design, production, maintenance and disposal of buildings. It is written with the conviction that by focusing on the process of choice, the range of theory and knowledge that is useful to practice becomes explicit, making the link between knowledge and practice, and between understanding and experience. The new edition has been updated throughout with extensive additions to Chapter13: Manufacture and Assembly and to Chapter 15: Sustainability. An entire new section has been added, covering all the main elements of commercial construction. Students will find here explanations of how environments, structural behaviour, production know-how, cost and social concerns such as sustainability can be taken into account in the choice of construction. They will also gain a clear understanding of the construction details and specifications adopted for both housing and commercial buildings in the UK at the beginning of the 21st century. Provides a framework to think through proposed solutions Sets the choice of solution in both time and place, and in the context of sustainability Focuses on key questions: will the proposal fail; and can it be built? Considers a building’s response to loading, environmental conditions and time Looks at the production process as manufacture and assembly Book website at www.wiley.com/go/bryanconstructiontech2e Contains nearly 200 fully referenced, clear line drawings to download for free, as well as suggested learning activities for lecturers to incorporate into their teaching programmes.
Download or read book Advances in Building Technology written by M. Anson and published by Elsevier. This book was released on 2002-11-14 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of proceedings is based on the International Conference on Advances in Building Technology in Hong Kong on 4-6 December 2002. The two volumes of proceedings contain 9 invited keynote papers, 72 papers delivered by 11 teams , and 133 contributed papers from over 20 countries around the world. The papers cover a wide spectrum of topics across the three technology sub-themes of structures and construction, environment, and information technology. The variety within these categories spans a width of topics, and these proceedings provide readers with a good general overview of recent advances in building research.
Download or read book Construction Technology written by Roy Chudley and published by . This book was released on 1999 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Technology provides a comprehensive introduction to every aspect of the technology of domestic low-rise construction, including elements of commercial construction, and the principal associated legislation. Based on Construction Technology Volumes 1 and 2, this combined new edition has been updated in line with contemporary legislation and practice. In addition a substantial amount of new material has also been included in order to cover recent developments in technology affecting the construction industry. The style of the original books by Roy Chudley has been retained, avoiding lengthy descriptive passages and leaving the original diagrams to illustrate best practice and techniques. This book covers the basic elements of substructure (site works, setting out and foundations) and superstructure (flooring and roofs, simple finishes, fittings and fixtures) as well as basic services such as water, gas electricity and drainage. It also considers low-rise framed industrial and commercial buildings.
Download or read book Recent Advances in Structural Engineering and Construction Management written by Kong Kian Hau and published by Springer. This book was released on 2022-10-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Structures, Materials and Construction (ICSMC 2021). It covers the recent developments and futuristic trends in the field of structural engineering and construction management, including new building materials and understanding their behavior. The topic covered also assess the current progress and state-of-the-art techniques in structural experimentation, smart materials, structures technology, principles of construction management, materials properties and characterization. The collection of papers included in this proceeding will contribute to scientific developments in the field of structural engineering and construction and will be a useful as reference material for the academicians, researchers and most importantly the student community pursuing research in the fields of structural engineering and construction technology.
Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.
