Download or read book Recent Advances in Thermal Sciences and Engineering written by Hemant B. Mehta and published by Springer Nature. This book was released on 2023-05-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS 2021) and summarizes the modern research practices in thermal sciences and engineering. The content of book involves advanced topics in heat transfer science, automobile, refrigeration and air conditioning, cryogenics, non-conventional systems and energy storage. Topics on cutting edge research in the area of hybrid nano-PCM-based systems, solar-based applications, bio-diesel and nano additives-based combustion, fuel cell and thermoacoustic engine are also included. In addition, this book contains recent research in the area of two-phase thermal management of Li-Ion/Li-titanium battery and LED systems using heat sink, heat pipe, pulsating heat pipe and thermosyphon with next-generation refrigerants, PCM and nanofluid. Some thermal aspects of virus/aerosol research, advances in volumetric velocimetry and application of artificial intelligence in thermal systems are also covered. This book is a valuable reference for academicians, researchers and professionals working in the various fields of thermal sciences.
Download or read book Recent Advances in Thermal Engineering written by C. V. Chandrashekara and published by Springer Nature. This book was released on with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Advances in Design and Thermal Systems written by Lionel Ganippa and published by Springer Nature. This book was released on 2021-04-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select peer-reviewed proceedings of the International Conference on Emerging Trends in Design, Manufacturing, Materials and Thermal Sciences (ETDMMT 2020). The contents focus on latest research in product design, CAD/CAE/CFD, robotic systems, neural networks, thermal systems, alternative fuels, propulsion systems, environmental issues related to combustion, autonomous vehicles and alternative energy applications. In addition, the book also covers recent advances in automotive engineering and aerospace technologies. Given the range of contents covered, this book can be useful for students, researchers as well as practicing engineers.
Download or read book Advances in Fluid and Thermal Engineering written by Pankaj Saha and published by Springer. This book was released on 2020-08-14 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book gives an overview of recent developments in the field of thermal and fluid engineering, and covers theoretical and experimental fluid dynamics, numerical methods in heat transfer and fluid mechanics, different modes of heat transfer, multiphase transport and phase change, fluid machinery, turbo machinery, and fluid power. The book is primarily intended for researchers and professionals working in the field of fluid dynamics and thermal engineering.
Download or read book Recent Advances in Thermal Engineering written by C. V. Chandrashekara and published by Springer. This book was released on 2024-08-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of 21st ISME conference on Advances in Mechanical Engineering. It covers the latest research and technological advancements in the area of thermal engineering. Various topics covered in this book are multi-phase flow, alternative fuels, fluid mechanics, combustion and IC engines, fluid machinery, heat and mass transfer, refrigeration and air-conditioning, renewable sources of energy, thermal systems simulation, heat exchangers, flow measurements, etc. The book is useful for researchers and professionals working in thermal engineering and allied fields.
Download or read book Advances in Thermal Energy Storage Systems written by Luisa F. Cabeza and published by Elsevier. This book was released on 2014-10-31 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. - Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes - Describes latent heat storage systems and thermochemical heat storage - Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry
Download or read book Recent Advances in Thermofluids and Manufacturing Engineering written by Shripad Revankar and published by Springer Nature. This book was released on 2022-09-30 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Thermofluids and Manufacturing Science (ICTMS 2022). Some of the topics covered include Heat transfer, fluid dynamics, multiphase flow, flow diagnostics using artificial neural network, aerodynamics, high-speed flows, sustainable energy technology, propulsion and emissions, Eco-friendly manufacturing, Coating Techniques and Supply chain management etc. Given the scope, the book will be highly useful for researchers and professionals interested in mechanical, production or aerospace engineering
Download or read book Advances in Heat Transfer and Thermal Engineering written by Chuang Wen and published by Springer Nature. This book was released on 2021-06-01 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 16th UK Heat Transfer Conference (UKHTC2019), which is organised every two years under the aegis of the UK National Heat Transfer Committee. It is the premier forum in the UK for the local and international heat transfer community to meet, disseminate ongoing work, and discuss the latest advances in the heat transfer field. Given the range of topics discussed, these proceedings offer a valuable asset for engineering researchers and postgraduate students alike.
Download or read book Recent Advances in Fluid Mechanics and Thermal Engineering written by Wseas Llc and published by . This book was released on 2015-01-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: 12th International Conference on Fluid Mechanics & Aerodynamics (FMA '14)12th International Conference on Heat Transfer, Thermal Engineering and Environment (HTE '14)
Download or read book Boiling written by Yasuo Koizumi and published by Elsevier. This book was released on 2017-06-22 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boiling: Research and Advances presents the latest developments and improvements in the technologies, instrumentation, and equipment surrounding boiling. Presented by the Japan Society of Mechanical Engineers, the book takes a holistic approach, first providing principles, and then numerous practical applications that consider size scales. Through six chapters, the book covers contributed sections from knowledgeable specialists on various topics, ranging from outlining boiling phenomena and heat transfer characteristics, to the numerical simulation of liquid-gas two phase flow. It summarizes, in a single volume, the state-of-the-art in boiling heat transfer and provides a valuable resource for thermal engineers and practitioners working in the thermal sciences and thermal engineering. - Explores the most recent advancements in boiling research and technology from the last twenty years - Provides section content written by contributing experts in their respective research areas - Shares research being conducted and advancements being made on boiling and heat transfer in Japan, one of the major research hubs in this field
Download or read book Advances in Thermal Engineering Manufacturing and Production Management written by Sadhan Kumar Ghosh and published by Springer Nature. This book was released on 2021-07-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Thermal Engineering and Management Advances (ICTEMA 2020). The contents discuss latest research in the areas of thermal engineering, manufacturing engineering, and production management. Some of the topics covered include multiphase fluid flow, turbulent flows, reactive flows, atmospheric flows, combustion and propulsion, computational methods for thermo-fluid arena, micro and nanofluidics, renewable energy and environment sustainability, non-conventional energy resources, energy principles and management, machine dynamics and manufacturing, casting and forming, green manufacturing, production planning and management, quality control and management, and traditional and non-traditional manufacturing. The contents of this book will be useful for students, researchers as well as professionals working in the area of mechanical engineering and allied fields.
Download or read book The Art of Measuring in the Thermal Sciences written by Josua Meyer and published by CRC Press. This book was released on 2020-11-05 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of Measuring in the Thermal Sciences provides an original state-of-the-art guide to scholars who are conducting thermal experiments in both academia and industry. Applications include energy generation, transport, manufacturing, mining, processes, HVAC&R, etc. This book presents original insights into advanced measurement techniques and systems, explores the fundamentals, and focuses on the analysis and design of thermal systems. Discusses the advanced measurement techniques now used in thermal systems Links measurement techniques to concepts in thermal science and engineering Draws upon the original work of current researchers and experts in thermal-fluid measurement Includes coverage of new technologies, such as micro-level heat transfer measurements Covers the main types of instrumentation and software used in thermal-fluid measurements This book offers engineers, researchers, and graduate students an overview of the best practices for conducting sound measurements in the thermal sciences.
Download or read book Advanced Thermodynamics for Engineers written by D. Winterbone and published by Butterworth-Heinemann. This book was released on 1996-11-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the basic theories of thermodynamics are adequately covered by a number of existing texts, there is little literature that addresses more advanced topics. In this comprehensive work the author redresses this balance, drawing on his twenty-five years of experience of teaching thermodynamics at undergraduate and postgraduate level, to produce a definitive text to cover thoroughly, advanced syllabuses. The book introduces the basic concepts which apply over the whole range of new technologies, considering: a new approach to cycles, enabling their irreversibility to be taken into account; a detailed study of combustion to show how the chemical energy in a fuel is converted into thermal energy and emissions; an analysis of fuel cells to give an understanding of the direct conversion of chemical energy to electrical power; a detailed study of property relationships to enable more sophisticated analyses to be made of both high and low temperature plant and irreversible thermodynamics, whose principles might hold a key to new ways of efficiently covering energy to power (e.g. solar energy, fuel cells). Worked examples are included in most of the chapters, followed by exercises with solutions. By developing thermodynamics from an explicitly equilibrium perspective, showing how all systems attempt to reach a state of equilibrium, and the effects of these systems when they cannot, the result is an unparalleled insight into the more advanced considerations when converting any form of energy into power, that will prove invaluable to students and professional engineers of all disciplines.
Download or read book The Art of Measuring in the Thermal Sciences written by Josua Meyer and published by CRC Press. This book was released on 2020-11-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of Measuring in the Thermal Sciences provides an original state-of-the-art guide to scholars who are conducting thermal experiments in both academia and industry. Applications include energy generation, transport, manufacturing, mining, processes, HVAC&R, etc. This book presents original insights into advanced measurement techniques and systems, explores the fundamentals, and focuses on the analysis and design of thermal systems. Discusses the advanced measurement techniques now used in thermal systems Links measurement techniques to concepts in thermal science and engineering Draws upon the original work of current researchers and experts in thermal-fluid measurement Includes coverage of new technologies, such as micro-level heat transfer measurements Covers the main types of instrumentation and software used in thermal-fluid measurements This book offers engineers, researchers, and graduate students an overview of the best practices for conducting sound measurements in the thermal sciences.
Download or read book Nanofluids Technology for Thermal Sciences and Engineering written by Mukesh Kumar Awasthi and published by CRC Press. This book was released on 2024-08-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text highlights how nanofluids can be used in thermal solutions across multiple industries, including electronics, energy, and manufacturing. It emphasizes the enhanced heat transfer properties of nanofluids and their potential to significantly improve the efficiency of heat exchange processes. This book discusses topics such as nanoparticle synthesis, nanofluid testing, performance enhancement using nanofluids, thermal behavior of hybrid nanofluids, Brinkman equation in nanofluids and safety considerations in nano fluid‐based systems. This book: • Discusses the recent innovation, technological development of nanofluids and explores nanoparticle synthesis and characterization for nanofluid development. • Offers a comprehensive understanding of nanofluid technology and nanofluid for aerospace application, covering diverse topics from fundamental properties to advanced research frontiers in nanofluids for thermal engineering. • Includes real‐world case studies and practical techniques that will help the readers to apply nanofluid technology in various thermal engineering scenarios. • Covers heat exchanger performance improvement with nanofluids, hybrid nanofluids, Flow of Newtonian and Non‐Newtonian hybrid Nanofluid, and oil‐based Tri‐hybrid Nanofluid. • Explains experimental techniques for nanofluid testing and validation and presents safety and environmental considerations in nanofluid‐based systems. It is primarily written for senior undergraduates, graduate students, and academic researchers in the fields of manufacturing engineering, industrial engineering, production engineering, mechanical engineering, automotive engineering, and aerospace engineering.
Download or read book Recent Advances in Applied Thermal Imaging for Industrial Applications written by Santhi, V. and published by IGI Global. This book was released on 2017-03-16 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the technological boom has resulted in many advancements in modern society, it has also come with a few downfalls; most notably, the failure of new machines and equipment. This has prompted engineers to find suitable diagnostics tools to stop impending malfunctions and make working environments more efficient. Recent Advances in Applied Thermal Imaging for Industrial Applications is a critical reference source that outlines innovative analysis tools to combat systems failure in thermal imaging. Highlighting pertinent topics such as fuzzy c- means technique, human health diagnosis system, multidimensional processing, and optical analysis, this is an ideal resource for all engineers, practitioners, industry leaders, and researchers who are interested in staying up-to-date with advances in thermal imaging which prevents industrial system malfunctions.
