Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.

Download or read book Real Time Fault Monitoring of Industrial Processes written by A.D. Pouliezos and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed and up-to-date exposition of fault monitoring methods in industrial processes and structures. The following approaches are explained in considerable detail: Model-based methods (simple tests, analytical redundancy, parameter estimation); knowledge-based methods; artificial neural network methods; and nondestructive testing, etc. Each approach is complemented by specific case studies from various industrial sectors (aerospace, chemical, nuclear, etc.), thus bridging theory and practice. This volume will be a valuable tool in the hands of professional and academic engineers. It can also be recommended as a supplementary postgraduate textbook. For scientists whose work involves automatic process control and supervision, statistical process control, applied statistics, quality control, computer-assisted predictive maintenance and plant monitoring, and structural reliability and safety.

Download or read book Advanced Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2010-08-26 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques

Download or read book Applied Digital Control written by J. R. Leigh and published by Courier Dover Publications. This book was released on 2006-06-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential core text, this volume develops theoretical foundations and explains how control systems work in real industrial situations. Several case histories assist students in visualizing applications. 1992 edition.

Download or read book Advances in Intelligent Autonomous Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of twenty-three timely contributions covers a well-selected repertory of topics within the autonomous systems field. The book discusses a range of design, construction, control, and operation problems along with a multiplicity of well-established and novel solutions.

Download or read book Remote Manipulation Systems written by L.I. Slutski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: A famous French writer, Anatole France, liked to say, "The future is a convenient place to position our dreams" (1927). Indeed, this remark gains full meaning when one considers the history of what we call today "Robotics." For more than 3000 years, mankind has dreamt ofthe possibility of arti ficial machines that would have all the advantages of human slaves without any of their drawbacks. With the developments in technology since the end of World War II, mainly with the explosive progress of computers, it was thought we might at last succeed in transforming this everlasting dream into reality. In the mind of scientists of the 1950's, to make such intelligent and autonomous machines before the year 2000 seemed a small challenge: it was obvious, thanks to computers and Artificial Intelligence. But, in spite of progress in some directions, we must admit that the dream remains a dream and that the basic problems denying us a successful issue are not solved. In fact, if we except industrial robots, only calling for classical automata theory, the main advanced result concerning autonomous and intelligent machines is related to some understanding of reasons why we have failed during the past years.

Download or read book Advances in Intelligent Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Systems involve a large class of systems which posses human-like capabilities such as learning, observation, perception, interpretation, reasoning under uncertainty, planning in known and unknown environments, decision making, and control action. The field of intelligent systems is actually a new interdisciplinary field which is the outcome of the interaction, cooperation and synergetic merging of classical fields such as system theory, control theory, artificial intelligence, information theory, operational research, soft computing, communications, linguistic theory, and others. Integrated intelligent decision and control systems involve three primary hierarchical levels, namely organization, coordination and execution levels. As we proceed from the be performed organization to the execution level, the precision about the jobs to increases and accordingly the intelligence required for these jobs decreases. This is in compliance with the principle of increasing precision with decreasing intelligence (IPOI) known from the management field and theoretically established by Saridis using information theory concepts. This book is concerned with intelligent systems and techniques and gives emphasis on the computational and processing issues. Control issues are not included here. The contributions of the book are presented in four parts as follows.

Download or read book Computational Intelligence in Systems and Control Design and Applications written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2000-01-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty timely contributions in the emerging field of Computational Intelligence (CI) with reference to system control design and applications. The three basic constituents ofCI are neural networks (NNs). fuzzy logic (FL) I fuzzy reasoning (FR). and genetic algorithms (GAs). NNs mimic the distributed functioning of the human brain and consist of many. rather simple. building elements (called artificial neurons) which are controlled by adaptive parameters and are able to incorporate via learning the knowledge provided by the environment, and thus respond intelligently to new stimuli. Fuzzy logic (FL) provides the means to build systems that can reason linguistically under uncertainty like the human experts (common sense reasoning). Both NNs and FL I FR are among the most widely used tools for modeling unknown systems with nonlinear behavior. FL suits better when there is some kind of knowledge about the system. such as, for example, the linguistic information of a human expert. On the other hand. NNs possess unique learning and generalization capabilities that allow the user to construct very accurate models of nonlinear systems simply using input-output data. GAs offer an interesting set of generic tools for systematic random search optimization following the mechanisms of natural genetics. In hybrid Computational Intelligence - based systems these three tools (NNs, FL, GAs) are combined in several synergetic ways producing integrated tools with enhanced learning, generalization. universal approximation. reasoning and optimization abilities.

Download or read book Fuzzy Logic Applications in Engineering Science written by J. Harris and published by Springer Science & Business Media. This book was released on 2006-01-17 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic is a relatively new concept in science applications. Hitherto, fuzzy logic has been a conceptual process applied in the field of risk management. Its potential applicability is much wider than that, however, and its particular suitability for expanding our understanding of processes and information in science and engineering in our post-modern world is only just beginning to be appreciated. Written as a companion text to the author’s earlier volume "An Introduction to Fuzzy Logic Applications", the book is aimed at professional engineers and students and those with an interest in exploring the potential of fuzzy logic as an information processing kit with a wide variety of practical applications in the field of engineering science and develops themes and topics introduced in the author’s earlier text.

Download or read book Geometrical Dynamics of Complex Systems written by Vladimir G. Ivancevic and published by Springer Science & Business Media. This book was released on 2006-09-10 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometrical Dynamics of Complex Systems is a graduate?level monographic textbook. Itrepresentsacomprehensiveintroductionintorigorousgeometrical dynamicsofcomplexsystemsofvariousnatures. By?complexsystems?,inthis book are meant high?dimensional nonlinear systems, which can be (but not necessarily are) adaptive. This monograph proposes a uni?ed geometrical - proachtodynamicsofcomplexsystemsofvariouskinds:engineering,physical, biophysical, psychophysical, sociophysical, econophysical, etc. As their names suggest, all these multi?input multi?output (MIMO) systems have something in common: the underlying physics. However, instead of dealing with the pop- 1 ular ?soft complexity philosophy?, we rather propose a rigorous geometrical and topological approach. We believe that our rigorous approach has much greater predictive power than the soft one. We argue that science and te- nology is all about prediction and control. Observation, understanding and explanation are important in education at undergraduate level, but after that it should be all prediction and control. The main objective of this book is to show that high?dimensional nonlinear systems and processes of ?real life? can be modelled and analyzed using rigorous mathematics, which enables their complete predictability and controllability, as if they were linear systems. It is well?known that linear systems, which are completely predictable and controllable by de?nition ? live only in Euclidean spaces (of various - mensions). They are as simple as possible, mathematically elegant and fully elaborated from either scienti?c or engineering side. However, in nature, no- ing is linear. In reality, everything has a certain degree of nonlinearity, which means: unpredictability, with subsequent uncontrollability.

Download or read book Fundamentals of Mechanics of Robotic Manipulation written by Marco Ceccarelli and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved from a course on Mechanics of Robots that the author has thought for over a dozen years at the University of Cassino at Cassino, Italy. It is addressed mainly to graduate students in mechanical engineering although the course has also attracted students in electrical engineering. The purpose of the book consists of presenting robots and robotized systems in such a way that they can be used and designed for industrial and innovative non-industrial applications with no great efforts. The content of the book has been kept at a fairly practical level with the aim to teach how to model, simulate, and operate robotic mechanical systems. The chapters have been written and organized in a way that they can be red even separately, so that they can be used separately for different courses and readers. However, many advanced concepts are briefly explained and their use is empathized with illustrative examples. Therefore, the book is directed not only to students but also to robot users both from practical and theoretical viewpoints. In fact, topics that are treated in the book have been selected as of current interest in the field of Robotics. Some of the material presented is based upon the author’s own research in the field since the late 1980’s.

Download or read book Multi Arm Cooperating Robots written by M.D. Zivanovic and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several consistent solutions for cooperative system control have recently been identified by the authors of the current monograph. This was achieved by solving three separate tasks that are essential for solving the problem of cooperative manipulation as a whole. The first task is related to the understanding of the physical nature of cooperative manipulation and finding a way for a sufficiently exact characterization of cooperative system statics, kinematics and dynamics. After successfully completing this task, in the frame of the second task, the problem of coordinated motion of the cooperative system is solved. Finally, as a solution to the third task, the control laws of cooperative manipulation are synthesized. The starting point in dealing with the above three tasks of cooperative manipulation was the assumption that the problem of force uncertainty in cooperative manipulation can be resolved by introducing elastic properties into the cooperative system, at least in the part where force uncertainty appears. In static and dynamic analysis of the elastic structure of cooperative systems the finite element method is applied. In contrast to the procedure used in the major part of the available literature where deformation work is expressed by deviations from the unloaded state of fixed elastic structure, in this monograph the deformation work is expressed by internal forces as a function of the absolute coordinates of contacts of mobile elastic structure. Coordinated motion and control in cooperative manipulation are solved as the problem of coordinated motion and control of a mobile elastic structure, taking into account the specific features of cooperative manipulation. Coordinated motion and control laws in cooperative manipulation are synthesized on the basis of a non-linear model where the problem of uncertainty is solved, which is not the case in the available literature. Simple examples demonstrate the consistent procedure of mathematical modeling and synthesis of nominal coordinated motion, as well as control of the cooperative system. This book will be useful to a wide audience of engineers, ranging from undergraduate and graduate students, new and advanced academic researchers, to practitioners (mechanical and electrical engineers, computer and system scientists). It is intended for readers whose work involves manufacturing, industrial, robotics, automation, computer and control engineering, and who wish to find out about this important new technology and its potential advantages for control engineering applications.

Download or read book An Introduction to Fuzzy Logic Applications written by J. Harris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic provides a unique method of approximate reasoning in an imperfect world. This text is a bridge to the principles of fuzzy logic through an application-focused approach to selected topics in Engineering and Management. The many examples point to the richer solutions obtained through fuzzy logic and to the possibilities of much wider applications. There are relatively few texts available at present in fuzzy logic applications. The style and content of this text is complementary to those already available. New areas of application are presented in a graded approach in which the underlying concepts are first described. The text is broadly divided into two parts which treat Processes and Materials and also System Applications. The level enables a selection of the text to be made for the substance of a senior undergraduate level course. There is also sufficient volume and quality for the basis of a postgraduate course. A more restricted and judicious selection can provide the material for a professional short course.

Download or read book Human Like Biomechanics written by Vladimir G. Ivancevic and published by Springer Science & Business Media. This book was released on 2008-01-11 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human-Like Biomechanics is a comprehensive introduction into modern geometrical methods to be used as a unified research approach in two apparently separate and rapidly growing fields: mathematical biomechanics and humanoid robotics. The book contains six Chapters and an Appendix. The first Chapter is an Introduction, giving a brief review of mathematical techniques to be used in the text. The second Chapter develops geometrical basis of human-like biomechanics, while the third Chapter develops its mechanical basis, mainly from generalized Lagrangian and Hamiltonian perspective. The fourth Chapter develops topology of human-like biomechanics, while the fifth Chapter reviews related nonlinear control techniques. The sixth Chapter develops covariant biophysics of electro-muscular stimulation. The Appendix consists of two parts: classical muscular mechanics and modern path integral methods, which are both used frequently in the main text. The whole book is based on the authors’ own research papers in human-like biomechanics.

Download or read book Analysis Design and Evaluation of Man Machine Systems 1988 written by J. Ranta and published by Elsevier. This book was released on 2014-06-28 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a state-of-the-art review of the development and future use of man-machine systems in all aspects of business and industry. The papers cover such topics as human-computer interaction, system design, and the impact of automation in general, and also by the use of case studies describe a wide range of applications in such areas as office automation, transportation, power plants, machinery and manufacturing processes and defence systems. Contains 73 papers.

Download or read book Handbook Of Industrial Automation written by Richard Shell and published by CRC Press. This book was released on 2000-08-29 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplies the most essential concepts and methods necessary to capitalize on the innovations of industrial automation, including mathematical fundamentals, ergonometrics, industrial robotics, government safety regulations, and economic analyses.

Download or read book Computer Controlled Systems written by G. Perdikaris and published by Springer Science & Business Media. This book was released on 1991-09-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the book is to provide advanced undergraduate or frrst-year graduate engineering students with a self-contained presentation of the principles fundamental to the analysis, design and implementation of computer controlled systems. The material is also suitable for self-study by practicing engineers and is intended to follow a first course in either linear systems analysis or control systerns. A secondary objective of the book is to provide engineering and/or computer science audiences with the material for a junior/senior-level course in modern systems analysis. Chapters 2, 3, 4, and 5 have been designed with this purposein rnind. The emphasis in such a course is to develop the rnathernatical tools and methods suitable for the analysis and design of real-time systems such as digital filters. Thus, engineers and/or computer scientists who know how to program computers can understand the mathematics relevant to the issue of what it is they are programrning. This is especially important for those who may work in engineering and scientific environments where, for instance, programrning difference equations for real-time applications is becorning increasingly common. A background in linear algebra should be an adequate prerequisite for the systems analysis course. Chapter 1 of the book presents a brief introduction to computer controlled systems. It describes the general issues and terminology relevant to the analysis, design, and implementation of such systems.