Download or read book Reaction Injection Molding and Fast Polymerization Reactions written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of reaction injection molding (RIM) has been fol lowed by the industry with mounting interest. RIM technology has brought to polymer processing a new flexibility and savings in both energy and capital investment. The new developments and the number of engineers and scientists working in RIM is growing at so fast a rate that there is need for sharing information on progress in this area. This book is based on papers presented at the International Symposium on Reaction Injection Molding which was held in 1981 in Atlanta, Georgia, and was sponsored by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry. The book is divided into four parts covering different areas of RIM development. The first part is devoted to the future trends of RIM develop ment in the United States and Japan. The structure-properties relationship and effects of annealing on properties of RIM elastomers are covered in the second part. New non-urethane polymers such as polyamides, polyisocyanurates and polystyrene suitable for RIM processing are discussed in the third part. In the last part the engineering and technological aspects of RIM, such as glass reinforcement, mixing, flow and moldability are covered in detail. Finally I would like to thank Mrs. Iris Glebe for typing this book and for help with editing, and K. Zielinski for his assistance v vi PREFACE in reviewing and, when necessary, correcting some of the papers. Thanks is also due to the editors of Plenum for their patience and helpfulness.
Download or read book Reaction Injection Molding and Fast Polymerization Reactions written by Jiri E. Kresta and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reaction Injection Molding and Fast Polymerization Reactions written by and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fast Polymerization Reactions and Reaction Injection Moulding written by American Chemical Society. Division of Organic Coatings and Plastics Chemistry and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reaction Injection Molding written by Jiri E. Kresta and published by . This book was released on 1985 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Plastics written by Hans-Georg Elias and published by John Wiley & Sons. This book was released on 2003-11-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Plastics is the answer to manifold requests for an updated version by the readership. Since publication of the first edition in 1993, the field of plastics has seen tremendous development. Their manufacture and properties are discussed and correlated to the molecular and supermolecular properties of polymers. The contents have been thoroughly revised, restructured and enlarged. Several topics such as polymer composites and mixtures, morphology, flow properties and processing have been given more space, and chapters on electrical conductivity and non-linear optical properties have been newly added. Reviews of the first edition: "This book presents a precise, yet non-mathematical introduction to plastics, their raw materials, syntheses, properties and applications." (B. Sillion, Revue de l'Institut Francais du Pétrole) "The volume is excellently written, with a simple, straightforward and comprehensive index. It provides an overview of all plastics, including raw materials: manufacture, structure, processing, properties and, of course, applications" (D.W. Taylor and J.F. Kennedy, Polymer International) "This book has all the earmarks of becoming a guide to or even a reference book for polymers in structural applications" (Willi Kreuder, Acta Polymerica)
Download or read book Advances in Elastomers and Rubber Elasticity written by Joginder Lal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is a sequel to "Elastomers and Rubber Elasticity," edited by J.E. Mark and J. Lal and published by the American Chemical Society in 1982. It is also based on papers presented at an ACS Symposium, sponsored by the Division of Polymer Chemistry, Inc., in this case one held in Chicago in September of 1985. The keynote speaker was to have been Pro fessor Paul J. Flory, and his untimely death just prior to the symposium was a tremendous loss to all of polymer science, in particular to those in terested in elastomeric materials. It is to his memory that this book is dedicated. There has been a great deal of progress in preparing and studying elas tomers since the preceding symposium, which was in 1981. In the case of the synthesis and curing of elastomers, much of the background necessary to an appreciation of these advances is given in the first, introductory chapter.
Download or read book Advances in Thermoplastic Elastomers written by Nikhil K. Singha and published by Elsevier. This book was released on 2024-01-26 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Thermoplastic Elastomers: Challenges and Opportunities brings together the state-of-the-art in thermoplastic elastomers (TPEs), covering innovative materials, synthesis techniques, processing methods and sustainability. Sections outline thermoplastic elastomers, rubber elastic, and thermoplastic vulcanizates, and review the current landscape, from research and published literature, to commercialization and patents. Subsequent chapters offer methodical coverage of different categories of advanced thermoplastic elastomer materials, including areas such as polyolefin-based TPEs and high performance TPEs. The final chapters in the book examine options for sustainability, including bio-based, bio-resourced, and biodegradable TPEs, as well as circular economy and recycling of TPEs.Finally, outlook and future market and research trends are reviewed. This is a valuable book for researchers and advanced students working with elastomers, polymer science, materials chemistry, and materials engineering. In an industrial setting, this is an essential resource for R&D professionals, scientists, and engineers looking to utilize thermoplastic elastomers in a range of advanced applications. Focuses on novel materials, such as polyolefin-based TPEs, fluorinated TPEs, silicone-based TPEs, and ionic TPEs Discusses sustainability in terms of bio-based or biocompatible TPEs, recycling and the circular economy Helps bridge the gap between research and commercialization, reviewing patents, literature, trends, and market.
Download or read book Physico Chemical Principles for Processing of Oligomeric Blends written by Semjon M Mezhikouski and published by CRC Press. This book was released on 1999-01-28 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the current state of theoretical and experimental studies of oligomeric mixed systems from the physico-chemical standpoint and provides a technologist with the means for the quantitative approach to preparing liquid oligomeric compositions and choosing proper operating conditions for their processing into materials and articles. Recommendations are given on the practical use of found physico-patterns as well as the physico-chemical analysis of the effect of the composition ingredients on the final properties.
Download or read book Telechelic Polymers written by Eric J. Goethals and published by CRC Press. This book was released on 1988-12-31 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first-of-its-kind publication reviews the most impor-tant literature on the synthesis, properties, and applications of telechelic polymers. Written by a group of internationally known ex-perts in the field, this text contains a review table which allows the reader to search for given polymers with given end groups. Over 1,250 references are listed, covering primary and review articles as well as patents. Chapters include the preparation of telechelics by stepwise polymerization, anionic polymerization, radical polymer-ization, cationic polymerization, ring-opening polymerization and controlled polymer degradation. Polyols for the polyurethane pro-duction are described, as well as halato-telechelic polymers. Also, a more theoretical contribution on the physical properties of net-works formed from telechelic polymers is provided.
Download or read book Telechelic Polymers Synthesis and Applications written by Eric J. Goethals and published by CRC Press. This book was released on 2018-01-18 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first-of-its-kind publication reviews the most impor-tant literature on the synthesis, properties, and applications of telechelic polymers. Written by a group of internationally known ex-perts in the field, this text contains a review table which allows the reader to search for given polymers with given end groups. Over 1,250 references are listed, covering primary and review articles as well as patents. Chapters include the preparation of telechelics by stepwise polymerization, anionic polymerization, radical polymer-ization, cationic polymerization, ring-opening polymerization and controlled polymer degradation. Polyols for the polyurethane pro-duction are described, as well as halato-telechelic polymers. Also, a more theoretical contribution on the physical properties of net-works formed from telechelic polymers is provided.
Download or read book Biological and Synthetic Polymer Networks written by O. Kramer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological and Synthetic Polymer Networks contains 36 papers selected from the papers presented at NETWORKS 86, the 8th Polymer Networks Group Meeting. NETWORKS 86 was held in Elsinore, Denmark, on 31 August 5 September 1986. A total of nine invited main lectures and 68 contributed papers were presented at the meeting. A wide range of important biological and synthetic materials consist of three-dimensional polymer networks. The properties range from very stiff structural materials to extremely flexible rubbery materials and gels. Most polymer networks are permanent networks held together by covalent bonds. Such networks are insoluble but they may swell considerably in good solvents. Polymer networks held together by ionic bonds, hydrogen bonds or so-called entanglements are of a more temporary nature. At long times they exhibit a tendency to flow, and they are soluble in good solvents. The paper by Professor Walther Burchard and his co-workers, 'Covalent, Thermoreversible and Entangled Networks: An Attempt at Comparison', serves as a general introduction to polymer networks. The book contains both theoretical and experimental papers on the formation, characterisation and properties of polymer networks. Two topics were given special sessions at the meeting, namely Biological Networks and Swelling of Polymer Networks.
Download or read book Coordination Polymerization written by Charles C. Price and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edwin J. Vandenberg, a long time researcher at the Research Center of Hercules Incorporated, was the 1981 winner of the American Chemical Society Award in Polymer Chemistry, sponsored by the Witco Chemical Corp. Following is the citation of the accomplishments which led to this award. "In recognition of his pioneering research that advanced polymer science and that led to the discovery and development of isotactic polypropylene, epichlorohydrin and propylene oxide elastomers, new polymerization catalysts, and the hydrogen method of controlling molecular weights of Ziegler polyolefins." It was my pleasure to arrange a symposium to celebrate this award at the Atlanta Meeting of the American Chemical Society on March 30, 1981. In considering the broad range of Vandenberg's contributions to polymer chemistry, it was decided to choose the subject of "Coordination Polymerization" for the symposium. This area is both one to which Vandenberg has made major contributions and one of great industrial and scientific interest. Since Vandenberg has been involved in coordination polymerization in both ring-opening and a-olefin type polymerizations, both were covered in the symposium, whose program follows. 1. "The Polymerization of 1,2-Epoxides Catalyzed by the Condensation Products of Metal-Containing Compounds with Alkylphosphates", T. Nakata, Research Laboratories, Osaka Soda Co., Ltd., 9 Otakasu-cho, Amagasaki City, Hyogo Pref. 660, Japan.
Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
Download or read book Polymers in Medicine written by Emo Chiellini and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the collected papers presented at the Inter national Symposium on Polymers in Medicine, Biomedical and Pharma cological Applications, which was held at Porto Cervo, Italy, May 24-28, 1982. To the best of our knowledge, this symposium was the first to be organized in Italy entirely devoted to the several aspects of the use of synthetic and semisynthetic macromolecular materials in the field of biomedical and pharmacological applications. The inten~ tion of the Organizing Committee of the symposium was the promotion of a scientific and cultural initiative to gain the attention of various experts in line research of the potential of suitably de signed "man-made" polymeric materials in biomedical applications. With highly qualified and worldwide attendance, the above goal was fully satisfied. Indeed the opportunity of meeting to gether in a well conceived and discreet corner of the world, scien tists with different cultural backgrounds and objectives helped ex tend the meaning of the symposium far beyond the Italian borders and the perspectives of the National Research Council of Italy (CNR) , the major sponsor of the meeting.
Download or read book New Monomers and Polymers written by Charles U. Pittman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in preparing new polymers peaked about 1966. Since that time, industrial and government support for the synthesis and study of new polymers has steadily declined. Gone are the good days when government funds supported a great push to attain ulti mate thermal stability for organic polymeric materials. Gone are the good days when many chemical companies, encouraged by the obvious potential for rewards, had great interest and provided support for preparing new polymers. We now often hear managers say "we have enough polymers" or "all we need to do is find additional and better ways to use existing polymers. " The latter often in cludes the statement, "we can get the new materials that are wanted from polymer alloys or blends. " Interest in preparing new monomers has also waned, even though it is well recognized that monomers with special functionality are greatly needed to fine-tune existing polymers for specific tasks. Shrinkage of interest in new monomer and polymer research has not come about solely as a result of the obvious maturity of the polymers industry. Since uses for polymers continue to grow and there is still room for good concepts to study, lack of market growth and fields of study have probably not significantly contribu ted to that shrinkage.
Download or read book Crown Ethers and Phase Transfer Catalysis in Polymer Science written by Lon Mathias and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transfer catalysis or interfacial catalysis is a syn thetic technique involving transport of an organic or inorganic salt from a solid or aqueous phase into an organic liquid where reaction with an organic-soluble substrate takes place. Over the past 15 years there has been an enormous amount of effort invested in the development of this technique in organic synthe sis. Several books and numerous review articles have appeared summarizing applications in which low molecular weight catalysts are employed. These generally include either crown ethers or onium salts of various kinds. While the term phase transfer catalysis is relatively new, the concept of using a phasetrans fer agent (PTA) is much older~ Both Schnell and Morgan employed such catalysts in synthesis of polymeric species in the early 1950's. Present developments are really extensions of these early applications. It has only been within the last several years that the use of phase transfer processes have been employed in polymer synthesis and modification. Similarly, the use of polymer-bound phase transfer agents is also a recent development. These and related areas have nonetheless enjoyed explosive growth as mea sured by the number of publications and the variety of applica tions which have appeared. Several reviews dealing with these l 6 polymer-related investigations have been published.
