Download or read book Rapidly Quenched Materials written by H. Fredriksson and published by Elsevier. This book was released on 2012-12-02 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 327 papers in this two-volume set cover a wide range of topics concerning the production, processing and properties of rapidly quenched melts. Various techniques for the production of non-equilibrium materials are also discussed, including solid state amorphization by rapid interdiffusion and thermobaric quenching.
Download or read book Rapidly Quenched Metals written by S Steeb and published by Elsevier. This book was released on 2012-12-02 with total page 1163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Quenched Metals, Volume I covers the proceedings of the Fifth International Conference on Rapidly Quenched Metals, held in Wurzburg, Germany on September 3-7, 1984. The book focuses on amorphous and crystalline metals formed by rapid quenching from the melt. The selection first covers the scope and trends of developments in rapid solidification technology, rapid solidification, and undercooling of liquid metals by rapid quenching. Discussions focus on experimental method, powders, strip, particulate production, consolidation, and alloys and alloy systems. The text then examines the solidification of undercooled liquid alloys entrapped in solid; crystallization kinetics in undercooled droplets; and grain refinement in bulk undercooled alloys. The manuscript tackles the undercooling of niobium-germanium alloys in a 100 meter drop tube; influence of process parameters on the cooling rate of the meltspinning process; and the mechanism of ribbon formation in melt-spun copper and copper-zirconium. The formation and structure of thick sections of rapidly-solidified material by incremental deposition and production of ultrafine dispersions of rare earth oxides in Ti alloys using rapid solidification are also mentioned. The selection is a valuable reference for physicists, chemists, physical metallurgists, and engineers.
Download or read book Rapidly Quenched Metals 6 written by R.W. Cochrane and published by Elsevier. This book was released on 1988-01-01 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Quenched Metals 6, Volume 1 covers the proceedings of the Sixth International Conference on Rapidly Quenched Metals held at Le Centre Sheraton, Montreal, Canada from August 3 to 7, 1987. The said conference discusses a wide variety of topics in the field of rapidly solidified metals. The book is divided into two parts. Part 1 covers topics that involve the formation and transformation in metallic materials; amorphous metals; the applications of mechanical alloying; and rapid melting and quenching. Part 2 discusses the formation and structure of amorphous alloys, which includes topics such as the metastability of amorphous phases; amorphous alloy powders; and studies about the properties of different amorphous alloys. The text is recommended for those involved in materials science and metallurgy, especially those studying rapidly solidified metals and amorphous alloys.
Download or read book Rapidly Quenched Metals 6 Volume 2 written by R.W. Cochrane and published by Elsevier. This book was released on 1988-01-01 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Quenched Metals 6: Volume 2
Download or read book Rapidly Quenched Metals III written by B. Cantor and published by . This book was released on 1978 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metastable Solids from Undercooled Melts written by Dieter Herlach and published by Elsevier. This book was released on 2006-12-18 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical concepts and tools to characterize and describe the formation of metastable solids from undercooled melts. Its aim is to facilitate understanding of the development of the science and technology of solidification of melts and to introduce new concepts within this exciting research field in order to fulfil the challenges of the future in the field of undercooled melts. A comprehensive description of the science and applications of the undercooling phenomenon is given. It is composed of several main parts: experimental techniques for undercooling; characterization of the undercooled melt as the first step in rapid solidification; introducing the concepts of modern theories of rapid dendrite and eutectic growth and their comparison with experimental results, and a survey of metastable materials formed from the non-equilibrium state of an undercooled melt.* Showing clear links to possible application of results obtained from basic research * The subject matter is multidisciplinary and will be of interest to material scientists, physicists, physical chemists, mechanical and electrical engineers
Download or read book Rapidly Quenched Metals 6 Volume 3 written by R.W. Cochrane and published by Elsevier. This book was released on 1988-01-01 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Quenched Metals 6: Volume 3
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Download or read book Magnetic Nano and Microwires written by Manuel Vázquez and published by Woodhead Publishing. This book was released on 2020-04-14 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nano-and Microwires: Design, Synthesis, Properties and Applications, Second Edition, reviews the growth and processing of nanowires and nanowire heterostructures using such methods as sol-gel and electrodeposition, focused-electron/ion-beam-induced deposition, epitaxial growth by chemical vapor transport, and more. Other sections cover engineering nanoporous anodic alumina, discuss magnetic and transport properties, domains, domain walls in nano-and microwires. and provide updates on skyrmions, domain walls, magnetism and transport, and the latest techniques to characterize and analyze these effects. Final sections cover applications, both current and emerging, and new chapters on memory, sensor, thermoelectric and nanorobotics applications. This book will be an ideal resource for academics and industry professionals working in the disciplines of materials science, physics, chemistry, electrical and electronic engineering and nanoscience. Details the multiple key techniques for the growth, processing and characterization of nanowires and microwires Reviews the principles and difficulties involved in applying magnetic nano- and microwires to a wide range of applications, also including biomedical and sensing applications Discusses magnetism and transport in nanowires, skyrmions and domain walls in nanowires and the latest innovations in magnetic imaging
Download or read book Proceedings of the Fifth Latin American Conference on Applications of the Moessbauer Effect written by V.A. Pena Rodriguez and published by Springer Science & Business Media. This book was released on 2002-07-31 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cusco, Peru, September 9-14, 1996
Download or read book Elements of Rapid Solidification written by Monde A. Otooni and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Rapid Solidification: Fundamentals and Applications is the product of many years of concentrated work in the field of rapid solidification and processing. This quasi-monograph is unique in two ways. It brings together the talent of many international scientists in an effort to focus attention on all aspects of a new scientific field and it concentrates on fundamentals and practical applications. Simply stated, this book has been written by the senior students in the field of rapid solidification technology for the new generation of solid-state physicists, materials scientists, materials engineers, metallurgists and ceramicists.
Download or read book Phase Diagrams 6 III written by Allen Alper and published by Elsevier. This book was released on 2012-12-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Diagrams: Materials Science and Technology, Volume III is an eight-chapter text that deals with the use of phase diagrams in electronic materials and glass technology. This volume first describes several crystal-growth techniques and the use of phase diagrams in crystals grown from high-temperature systems. This is followed by discussions on phase problems encountered in semiconductor studies with compound semiconductors and the use of phase diagrams in illustrating superconducting state and superconductivity property of materials. A chapter deals with the preparation of metastable phases by rapid quenching from the liquid (splat cooling) and the alloy constitution changes associated with their formation and properties, with a particular emphasis on the phase-diagram representation of metastable alloy phases. The discussion then shifts to metastable liquid immiscibility, occurrence, techniques of study, mechanisms of microphase separation, phase diagrams, and practical applications. This volume also examines the use of phase diagrams to obtain solubility data for high-temperature systems assisting in the prediction of dissolution behavior. The concluding chapters explore the relationships between phase diagrams and the structure of glass-forming oxide and phase studies of molten salts and their interactions with other salts and oxides. This book will be useful to all scientists, engineers, and materials science students who are investigating and developing materials, as well as to the end users of the materials.
Download or read book Preliminary Reports Memoranda and Technical Notes of the Materials Research Council Summer Conference written by Materials Research Council. Summer Conference and published by . This book was released on 1976 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by R.W. Cahn and published by Elsevier. This book was released on 1996-02-09 with total page 2889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth edition of a work which first appeared in 1965. The first edition had approximately one thousand pages in a single volume. This latest volume has almost three thousand pages in 3 volumes which is a fair measure of the pace at which the discipline of physical metallurgy has grown in the intervening 30 years.Almost all the topics previously treated are still in evidence in this version which is approximately 50% bigger than the previous edition. All the chapters have been either totally rewritten by new authors or thoroughly revised and expanded, either by the third-edition authors alone or jointly with new co-authors. Three chapters on new topics have been added, dealing with dry corrosion, oxidation and protection of metal surfaces; the dislocation theory of the mechanical behavior of intermetallic compounds; and (most novel) a chapter on polymer science for metallurgists, which analyses the conceptual mismatch between metallurgists' and polymer scientists' way of looking at materials. Special care has been taken throughout all chapters to incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included in this edition. There is a very detailed subject index, as well as a comprehensive author index.The original version of this book has long been regarded as the standard text in physical metallurgy and this thoroughly rewritten and updated version will retain this status.
Download or read book Rapidly Solidified Alloys written by Liebermann and published by CRC Press. This book was released on 1993-05-20 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details the principles underlying rapid solidification processing, material structure and properties, and their applications. This practical resource presents a manifold approach to both amorphous and crystalline rapidly solidified metallic alloys.;Written by over 30 internationally acclaimed specialists in their respective fields, Rapidly Solidified Alloys: surveys nucleation and growth studies in undercooled melts; examines various processes for the production of rapidly solidified alloys; discusses the compaction of amorphous alloys; describes surface remelting treatments for the rapid solidification of surface layers and the resultant improved workpiece properties; covers the closely related topics of structural relaxation, atomic transport and other thermally induced processes; demonstrates microstructure-property relationships in rapidly quenched crystalline alloy systems and their beneficial effects in applications; and elucidates the basic, engineeering, and applications-oriented magnetic properties of amorphous alloys.;Furnishing more than 2300 literature citations for further study of specific subjects, Rapidly Solidified Alloys is intended for materials, mechanical, product, and civil engineers; metallurgists; magneticians; physicists; physical chemists; and graduate students in these disciplines.
Download or read book New Technologies Development and Application VI written by Isak Karabegovic and published by Springer Nature. This book was released on 2023-05-19 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on 22–24 June 2023. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, and renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems, smart grids, nonlinear systems, power, social and economic systems, education, and IoT. This book is oriented towards Fourth Industrial Revolution “Industry 4.0”, which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book Melt Quenched Nanocrystals written by A. M. Glezer and published by CRC Press. This book was released on 2013-06-17 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Melt quenching-the method of quenching from the liquid state-provides new opportunities for producing advanced materials with a unique combination of properties. In the process of melt quenching, attainment of critical cooling rates can produce specific structural states of the material. Nanocrystalline materials produced by melt quenching are clas
