Download or read book Models for Wind Tunnel Tests Based on Additive Manufacturing Technology written by Weijun Zhu and published by Springer Nature. This book was released on 2024-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces design and fabrication of physical models for wind tunnel tests based on additive manufacturing technology, including model design technology, model fabrication process, strengthening technology, etc. On this basis, it introduces in detail the specific implementation process of commonly used models, e.g., force measurement models, pressure measurement models, elastic models, and flutter models. This book mainly provides references for researchers and engineers who are engaged in aircraft design, experimental fluid mechanics, and additive manufacturing technology research.
Download or read book Rapid Prototyping Technology written by Kenneth Cooper and published by CRC Press. This book was released on 2001-01-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reviews operation principles and methods for most Solid Freeform technologies and historical systems data. Illustrates the uses and mechanical details for a number of systems, including JP-System 5, Ballistic Particle Manufacturing, Fused Deposition Modeling, Laminated Object Manufacturing, Stereolithography, and Selective Laser Sintering, and more."
Download or read book Application of Rapid Prototyping Methods to High Speed Wind Tunnel Testing written by A. M. Springer and published by . This book was released on 1998 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Tunnel Test Techniques written by Colin Britcher and published by Academic Press. This book was released on 2023-10-20 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Tunnel Test Techniques: Design and Use at Low and High Speeds with Statistical Engineering Applications provides an up-to-date treatment of the topic. Beginning with a brief history of wind tunnels and its types and uses, the book goes on to cover subsonic, supersonic and hypersonic wind tunnel design and construction, calibration, boundary corrections, flow quality assessment, pressure surveys, and dynamic testing. It also focuses on wind tunnel facilities, making it useful for both the designer and operator. Engineers and graduate students in aerospace, automotive and similar programs will find this book useful in their work with experimental aerodynamics, gas dynamics, facility design and performance. - Deals with a broad range of flow speeds in wind tunnels, from low speed to high speed - Provides a discussion of similarity laws as well as material on statistical analysis - Includes coverage on facility-to-facility and facility-to-CFD correlation - Presents advanced topics such as cryogenic wind tunnels, ground simulation in automotive testing, and propulsion testing
Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts
Download or read book Stereolithography and Other RP M Technologies written by Paul Francis Jacobs and published by American Society of Mechanical Engineers. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by personnel from North American suppliers of commercially available RPandM systems, the volume updates the state of the technology, and emphasizes the user advantages in terms of cost, market speed, and quality. Topics include: advances in stereolithography photopolymer systems; stereolithography hardware and software technology; parts accuracy; QuickCast development, foundry experience and application; RPandM applications at Sandia National Laboratories; the soft tooling, hard tooling, and special applications of RPandM; and laminated object manufacturing. Includes a chapter on service bureaus and also a directory. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Rapid Prototyping Rapid Tooling and Reverse Engineering written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-06-08 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the role of Rapid Prototyping Techniques within the product development phase. It deals with the concept, origin, and working cycle of Rapid Prototyping Processes with emphasis on the applications. Apart from elaboration of engineering and non-engineering applications, it highlights recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models. Special emphasis has been provided to the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence the book also elaborates on the mass manufacturing of rapid prototyped products. This includes casting and rapid tooling. The book concludes with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. With globalization of market and advances in science and technology, the life span of products has shortened considerably. For early realization of products and short development period, engineers and researchers are constantly working together for more and more efficient and effective solutions. The most effective solution identified has been usage of computers in both designing and manufacturing. This gave birth to the nomenclatures CAD (Computer Aided Designing) and CAM (Computer aided Manufacturing). This was the initiation that ensured short product development and realization period. Researchers coined the concept as Rapid Prototyping. In contrast to Prototyping, Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive or subtractive layer manufacturing" technology. The first methods for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus for early product realization or physical products for actual testing. This book is expected to contain Seven Chapters. Chapter 1 would explain product life cycle and the product development phase in the same, introducing role of Rapid Prototyping Techniques in Product development phase. Chapter 2 would deals with the concept, origin and working cycle of Rapid Prototyping Processes. Chapter 3 would concentrates on the applications of Rapid Prototyping Technology. Apart from elaboration of engineering and non-engineering applications, it also elaborates on recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models etc. Chapter 4 would introduce the various Rapid Prototyping systems available worldwide. The chapter also introduces the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS hence ensuring low rejection rate by human body. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence Chapter 5 would elaborates on the mass manufacturing of rapid prototyped products. This includes Casting and Rapid Tooling. Chapter 6 would deal with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. As the product realization is primarily dependent on various softwares which are required to be understood for better accuracy so the concluding chapter of the book i.e. Chapter 7 would explain some software associated with the various techniques.
Download or read book Journal of Aircraft written by and published by . This book was released on 2009 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Materials Selector Second Edition written by N. Waterman and published by Taylor & Francis. This book was released on 2024-09-06 with total page 2675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the increased understanding we now have of materials and their properties, selecting materials for a given application remains a daunting, non-trivial task. The volume of data, inadequacies in the data, and the tens of thousands of materials to choose from can overwhelm the would-be user. The Materials Selector addresses all the problems faced by materials scientists and engineers. In its three volumes you will find the properties, performance, and processability of metals, plastics, carbon and graphite, glasses, ceramics, polymerics, and composites. The characteristics and comparative economics of the manufacturing routes that convert these materials into engineering components.
Download or read book Rapid Manufacturing written by Duc Pham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is an exciting new technology used to create physical models and functional prototypes directly from CAD models. Rapid tooling concerns the production of tooling using parts manufactured by rapid prototyping. The book describes the characteristics and capabilities of the main known rapid prototyping processes. It covers in detail various commercially available processes such as: Stereolithography (SLA), Selective Laser Sintering (SLS), and others. The text places a strong emphasis on practical applications and contains an abundance of photographs and diagrams to illustrate clearly the principles of the machines and processes involved.
Download or read book X 33 Rev F Turbulent Aeroheating Results From Test 6817 in NASA Langley 20 Inch Mach 6 Air Tunnel and Comparisons With Computations written by Brian R. Hollis and published by . This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Rapid Prototyping Methods to High Speed Wind Tunnel Testing written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-08 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was undertaken in MSFC's 14-Inch Trisonic Wind Tunnel to determine if rapid prototyping methods could be used in the design and manufacturing of high speed wind tunnel models in direct testing applications, and if these methods would reduce model design/fabrication time and cost while providing models of high enough fidelity to provide adequate aerodynamic data, and of sufficient strength to survive the test environment. Rapid prototyping methods utilized to construct wind tunnel models in a wing-body-tail configuration were: fused deposition method using both ABS plastic and PEEK as building materials, stereolithography using the photopolymer SL-5170, selective laser sintering using glass reinforced nylon, and laminated object manufacturing using plastic reinforced with glass and 'paper'. This study revealed good agreement between the SLA model, the metal model with an FDM-ABS nose, an SLA nose, and the metal model for most operating conditions, while the FDM-ABS data diverged at higher loading conditions. Data from the initial SLS model showed poor agreement due to problems in post-processing, resulting in a different configuration. A second SLS model was tested and showed relatively good agreement. It can be concluded that rapid prototyping models show promise in preliminary aerodynamic development studies at subsonic, transonic, and supersonic speeds. Springer, A. M. Marshall Space Flight Center...
Download or read book Solid Modeling and Applications written by Dugan Um and published by Springer. This book was released on 2015-09-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lessons in this fundamental text equip students with the theory of Computer Assisted Design (CAD), Computer Assisted Engineering (CAE), the essentials of Rapid Prototyping, as well as practical skills needed to apply this understanding in real world design and manufacturing settings. The book includes three main areas: CAD, CAE, and Rapid Prototyping, each enriched with numerous examples and exercises. In the CAD section, Professor Um outlines the basic concept of geometric modeling, Hermite and Bezier Spline curves theory, and 3-dimensional surface theories as well as rendering theory. The CAE section explores mesh generation theory, matrix notion for FEM, the stiffness method, and truss Equations. And in Rapid Prototyping, the author illustrates stereo lithographic theory and introduces popular modern RP technologies. Solid Modeling and Applications: Rapid Prototyping, CAD and CAE Theory is ideal for university students in various engineering disciplines as well as design engineers involved in product design, analysis, and validation.
Download or read book Rapid Prototyping written by Chee Kai Chua and published by World Scientific. This book was released on 2010 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping (RP) has revolutionized how prototypes are made and small batch manufacturing is carried out. With rapid prototyping, The strategies used to produce a part change a number of important considerations and limitations previously faced by tool designers and engineers. Now in its third edition, this textbook is still the definitive text on RP. it covers the key RP processes, The available models and specifications, and their principles, materials, advantages and disadvantages. Examples of application areas in design, planning, manufacturing, biomedical engineering, art and architecture are also given. The book includes several related problems so that the reader can test his or her understanding of the topics. New to this edition, The included CD-ROM presents animated illustrations of the working principles of today's key RP processes.
Download or read book Rapid Prototyping Technology written by Md Enamul Hoque and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering often deals with customized design that requires easy, low-cost and rapid fabrication. Rapid prototyping (RP) is a popular technology that enables quick and easy fabrication of customized forms/objects directly from computer aided design (CAD) model. The needs for quick product development, decreased time to market, and highly customized and low quantity parts are driving the demand for RP technology. Today, RP technology also known as solid freeform fabrication (SFF) or desktop manufacturing (DM) or layer manufacturing (LM) is regarded as an efficient tool to bring the product concept into the product realization rapidly. Though all the RP technologies are additive they are still different from each other in the way of building layers and/or nature of building materials. This book delivers up-to-date information about RP technology focusing on the overview of the principles, functional requirements, design constraints etc. of specific technology.
Download or read book F1 Racing Confidential written by Giles Richards and published by Twelve. This book was released on 2024-07-09 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlock an all-access look inside the thrilling world of Formula One. Formula One is one of the most intense, complex and secretive sports on the planet. Recent documentaries such as Netflix’s Drive to Survive series have given a glimpse of life inside the paddock, but there are so many more stories from this high-stakes, globetrotting world that remain untold. In F1 Racing Confidential, Guardian journalist Giles Richards draws on more than a decade of experience working at the heart of Formula One to reveal the inner workings of the world’s most glamorous motorsport. Featuring exclusive interviews with men and women working at every level of F1 Teams including Mercedes, Red Bull, Ferrari, McLaren, Alfa Romeo, and Aston Martin, this is an unprecedented, behind-the-scenes look at the complete workings of a modern Formula One team. With contributions from high-profile insiders, including Christian Horner, Lando Norris, and Toto Wolff, each with their own fascinating stories, insights and revelations, F1 Racing Confidential pulls back the curtain on the world of Formula One like never before.
