Download or read book Rapid Modeling and Analysis Tools Evolution Status Needs and Directions written by and published by . This book was released on 2002 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Modeling and Analysis Tools Evolution Status Needs and Directions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-24 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced aerospace systems are becoming increasingly more complex, and customers are demanding lower cost, higher performance, and high reliability. Increased demands are placed on the design engineers to collaborate and integrate design needs and objectives early in the design process to minimize risks that may occur later in the design development stage. High performance systems require better understanding of system sensitivities much earlier in the design process to meet these goals. The knowledge, skills, intuition, and experience of an individual design engineer will need to be extended significantly for the next generation of aerospace system designs. Then a collaborative effort involving the designer, rapid and reliable analysis tools and virtual experts will result in advanced aerospace systems that are safe, reliable, and efficient. This paper discusses the evolution, status, needs and directions for rapid modeling and analysis tools for structural analysis. First, the evolution of computerized design and analysis tools is briefly described. Next, the status of representative design and analysis tools is described along with a brief statement on their functionality. Then technology advancements to achieve rapid modeling and analysis are identified. Finally, potential future directions including possible prototype configurations are proposed.Knight, Norman F., Jr. and Stone, Thomas J. and Ransom, Jonathan B. (Technical Monitor)Langley Research CenterAEROSPACE SYSTEMS; DESIGN ANALYSIS; STRUCTURAL ANALYSIS; COMPUTER AIDED DESIGN; ENGINEERS; RELIABILITY; RISK
Download or read book Rapid Modeling and Analysis Tools written by Norman F. Knight and published by . This book was released on 2002 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Modelling for Increasing Competitiveness written by Gerald Reiner and published by Springer Science & Business Media. This book was released on 2009-06-13 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term “Rapid Modeling” to denote queuing modeling of manufacturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the ?rst ever conference on Rapid Modeling. Attendees at this conferencemight?nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.
Download or read book Defense Modeling Simulation and Analysis written by National Research Council and published by National Academies Press. This book was released on 2006-09-22 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, simulation, and analysis (MS&A) is a crucial tool for military affairs. MS&A is one of the announced pillars of a strategy for transforming the U.S. military. Yet changes in the enterprise of MS&A have not kept pace with the new demands arising from rapid changes in DOD processes and missions or with the rapid changes in the technology available to meet those demands. To help address those concerns, DOD asked the NRC to identify shortcomings in current practice of MS&A and suggest where and how they should be resolved. This report provides an assessment of the changing mission of DOD and environment in which it must operate, an identification of high-level opportunities for MS&A research to address the expanded mission, approaches for improving the interface between MS&A practitioners and decision makers, a discussion of training and continuing education of MS&A practitioners, and an examination of the need for coordinated military science research to support MS&A.
Download or read book Rapid Prototyping Technology written by Md Enamul Hoque and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering often deals with customized design that requires easy, low-cost and rapid fabrication. Rapid prototyping (RP) is a popular technology that enables quick and easy fabrication of customized forms/objects directly from computer aided design (CAD) model. The needs for quick product development, decreased time to market, and highly customized and low quantity parts are driving the demand for RP technology. Today, RP technology also known as solid freeform fabrication (SFF) or desktop manufacturing (DM) or layer manufacturing (LM) is regarded as an efficient tool to bring the product concept into the product realization rapidly. Though all the RP technologies are additive they are still different from each other in the way of building layers and/or nature of building materials. This book delivers up-to-date information about RP technology focusing on the overview of the principles, functional requirements, design constraints etc. of specific technology.
Download or read book Rapid Modelling and Quick Response written by Gerald Reiner and published by Springer Science & Business Media. This book was released on 2010-09-16 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Modelling and Quick Response presents new research developments in the fields of rapid modelling and quick response linked with performance improvements (based on lead time reduction, etc., as well as financial performance measures). The papers and teaching cases in this book were presented at the second Rapid Modelling Conference: "Quick Response – Intersection of Theory and Practice". The main focus of this collection is the transfer of knowledge from theory to practice, providing the theoretical foundations for successful performance improvement. This conference volume challenges the traditional notions of rapid modelling, and offers valuable contributions to the scientific communities of operations management, production management, supply chain management, industrial engineering and operations research. Rapid Modelling and Quick Response will give the interested reader (researcher, as well as practitioner) a good overview of new developments in this field.
Download or read book Essential UMLTm fast written by Aladdin Ayesh and published by Springer Science & Business Media. This book was released on 2002-07-24 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential UML fast introduces the concepts of object-oriented analysis, design and programming, using the Unified Modeling Language (UML). UML is one of the best known modeling languages in the object-oriented software development world, and is fast becoming a standard amongst OO software developers. The book contains plenty of examples and detailed illustrations, making it easy for readers to get up and running with UML fast. In providing these examples the author relies on one of the well known use case tools, Select Enterprise. Advice is given on how to set up Select Enterprise as well as how to use it to speed up the modeling process of practical software.
Download or read book Development of an Early Stage Ship Design Tool for Rapid Modeling in Paramarine written by Eric J. Thurkins (Jr.) and published by . This book was released on 2012 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: In early-stage ship design, it is helpful to perform preliminary design and analysis on many configurations to assist in developing and narrowing the trade space. This process is further complicated with the increasing interest in concepts that are breaks from previous practice, such as Integrated Power System (IPS) designs, which require initial development to go deeper than historically based parametrics can provide. Paramarine is a ship design and analysis tool which can be used in this early-stage design; however, as with many early-stage design tools, the fleshing out of diverse ideas in Paramarine can be time and resource consuming. In an effort to enable a developer to create early-stage designs with depth significant enough to be meaningful but still general enough to allow the level of flexibility in design required in the early stages of development, this project seeks to develop an Early Stage Ship Design Tool (ESSDT). This ESSDT is a novel interface with which a designer can rapidly develop and alter basic, major design components of a ship from a compiled database of components and gain a rendered model for analysis within the naval design tool Paramarine. By making use of many early-stage parametric and developed calculations and leveraging the use of IPS, this ESSDT automates many of the initial ship's estimates and minutia of design. Utilizing both Excel and Paramarine software, the ESSDT rapidly creates a visual model of a basic naval vessel with primary systems and equipment from relatively few initial user inputs while embodying a depth of user-changeable default settings for more complex and non-standard design efforts. Several case studies were run to show the capability and flexibility of the tool, as well as showing how new powering and mechnical systems can affect the parameters of the ship as a system of systems.
Download or read book Multi Objective Machine Learning written by Yaochu Jin and published by Springer Science & Business Media. This book was released on 2007-06-10 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, increasing interest has been shown in applying the concept of Pareto-optimality to machine learning, particularly inspired by the successful developments in evolutionary multi-objective optimization. It has been shown that the multi-objective approach to machine learning is particularly successful to improve the performance of the traditional single objective machine learning methods, to generate highly diverse multiple Pareto-optimal models for constructing ensembles models and, and to achieve a desired trade-off between accuracy and interpretability of neural networks or fuzzy systems. This monograph presents a selected collection of research work on multi-objective approach to machine learning, including multi-objective feature selection, multi-objective model selection in training multi-layer perceptrons, radial-basis-function networks, support vector machines, decision trees, and intelligent systems.
Download or read book Modeling Analysis and Design of Control Systems in MATLAB and Simulink written by Dingyü Xue and published by World Scientific Publishing Company. This book was released on 2014-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB and Simulink are now being used extensively in not only academia as a teaching aid, a learning aid and a research tool but also industry for modeling, analysis, design and rapid prototyping. As a response, Modeling, Analysis and Design of Control Systems in MATLAB and Simulink emphasizes on practical use of and problem solving in MATLAB and Simulink following the so-called MAD (modeling, analysis and design) notion. Readers can not only learn the control concepts and problem solving methods but also coding skills by following the numerous inline MATLAB scripts, functions, reproducible examples as well as chapter-end Problems. The book service website contains Solution Manual, 1, 000 plus teaching/learning PPTs, and all related codes used in the book for reproducing the examples.Modeling, Analysis and Design of Control Systems in MATLAB and Simulink has 12 chapters organized in 5 parts: Foundation, Modeling, Analysis, Design and Rapid Prototyping. Each chapter ends with Problems section. This book can be used as a reference text in the introductory control course for undergraduates in all engineering schools. The coverage of topics is broad, yet balanced, and it should provide a solid foundation for the subsequent control engineering practice in both industry and research institutes. This book will be a good desktop reference for control engineers and many codes and tools in this book may be directly applicable in real world problem solving.
Download or read book Applied Modeling Techniques and Data Analysis 1 written by Yiannis Dimotikalis and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIG DATA, ARTIFICIAL INTELLIGENCE AND DATA ANALYSIS SET Coordinated by Jacques Janssen Data analysis is a scientific field that continues to grow enormously, most notably over the last few decades, following rapid growth within the tech industry, as well as the wide applicability of computational techniques alongside new advances in analytic tools. Modeling enables data analysts to identify relationships, make predictions, and to understand, interpret and visualize the extracted information more strategically. This book includes the most recent advances on this topic, meeting increasing demand from wide circles of the scientific community. Applied Modeling Techniques and Data Analysis 1 is a collective work by a number of leading scientists, analysts, engineers, mathematicians and statisticians, working on the front end of data analysis and modeling applications. The chapters cover a cross section of current concerns and research interests in the above scientific areas. The collected material is divided into appropriate sections to provide the reader with both theoretical and applied information on data analysis methods, models and techniques, along with appropriate applications.
Download or read book Euromat 99 Microstructures Mechanical Properties and Processes written by Yves Bréchet and published by John Wiley & Sons. This book was released on 2000-07-13 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relation between microstructures and mechanical properties has always been a challenge for materials science. Modelling the formation, properties and long term stability of microstructures is one of the most impressive and promising advances of modern materials science. This book presents recent advances and challenges in this fast evolving cross disciplinary field. It addresses applications of classical physical metallurgy, and the need for new modelling approaches, both on the analytical viewpoint and on the simulation side.
Download or read book System Analysis and Modeling About Models written by Frank Alexander Kraemer and published by Springer. This book was released on 2011-06-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the throughly refereed post-proceedings of the 6th International Workshop on Systems Analysis and Modeling, SAM 2010, held in collocation with MODELS 2010 in Oslo, Norway in October 2010. The 15 revised full papers presented went through two rounds of reviewing and improvement. The papers are organized in topical sections on modularity, composition, choreography, application of SDL and UML; SDL language profiles; code generation and model transformations; verification and analysis; and user requirements notification.
Download or read book Statistical Modeling and Analysis for Database Marketing written by Bruce Ratner and published by CRC Press. This book was released on 2003-05-28 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional statistical methods are limited in their ability to meet the modern challenge of mining large amounts of data. Data miners, analysts, and statisticians are searching for innovative new data mining techniques with greater predictive power, an attribute critical for reliable models and analyses. Statistical Modeling and Analysis fo
Download or read book Financial Modeling with Crystal Ball and Excel Website written by John Charnes and published by John Wiley & Sons. This book was released on 2012-06-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated look at financial modeling and Monte Carlo simulation with software by Oracle Crystal Ball This revised and updated edition of the bestselling book on financial modeling provides the tools and techniques needed to perform spreadsheet simulation. It answers the essential question of why risk analysis is vital to the decision-making process, for any problem posed in finance and investment. This reliable resource reviews the basics and covers how to define and refine probability distributions in financial modeling, and explores the concepts driving the simulation modeling process. It also discusses simulation controls and analysis of simulation results. The second edition of Financial Modeling with Crystal Ball and Excel contains instructions, theory, and practical example models to help apply risk analysis to such areas as derivative pricing, cost estimation, portfolio allocation and optimization, credit risk, and cash flow analysis. It includes the resources needed to develop essential skills in the areas of valuation, pricing, hedging, trading, risk management, project evaluation, credit risk, and portfolio management. Offers an updated edition of the bestselling book covering the newest version of Oracle Crystal Ball Contains valuable insights on Monte Carlo simulation—an essential skill applied by many corporate finance and investment professionals Written by John Charnes, the former finance department chair at the University of Kansas and senior vice president of global portfolio strategies at Bank of America, who is currently President and Chief Data Scientist at Syntelli Solutions, Inc. Risk Analytics and Predictive Intelligence Division (Syntelli RAPID) Engaging and informative, this book is a vital resource designed to help you become more adept at financial modeling and simulation.
Download or read book Financial Modeling with Crystal Ball and Excel written by John Charnes and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated look at financial modeling and Monte Carlo simulation with software by Oracle Crystal Ball This revised and updated edition of the bestselling book on financial modeling provides the tools and techniques needed to perform spreadsheet simulation. It answers the essential question of why risk analysis is vital to the decision-making process, for any problem posed in finance and investment. This reliable resource reviews the basics and covers how to define and refine probability distributions in financial modeling, and explores the concepts driving the simulation modeling process. It also discusses simulation controls and analysis of simulation results. The second edition of Financial Modeling with Crystal Ball and Excel contains instructions, theory, and practical example models to help apply risk analysis to such areas as derivative pricing, cost estimation, portfolio allocation and optimization, credit risk, and cash flow analysis. It includes the resources needed to develop essential skills in the areas of valuation, pricing, hedging, trading, risk management, project evaluation, credit risk, and portfolio management. Offers an updated edition of the bestselling book covering the newest version of Oracle Crystal Ball Contains valuable insights on Monte Carlo simulation—an essential skill applied by many corporate finance and investment professionals Written by John Charnes, the former finance department chair at the University of Kansas and senior vice president of global portfolio strategies at Bank of America, who is currently President and Chief Data Scientist at Syntelli Solutions, Inc. Risk Analytics and Predictive Intelligence Division (Syntelli RAPID) Engaging and informative, this book is a vital resource designed to help you become more adept at financial modeling and simulation.
