Download or read book Radiation Effects in Materials written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of radiation effects has developed as a major field of materials science from the beginning, approximately 70 years ago. Its rapid development has been driven by two strong influences. The properties of the crystal defects and the materials containing them may then be studied. The types of radiation that can alter structural materials consist of neutrons, ions, electrons, gamma rays or other electromagnetic waves with different wavelengths. All of these forms of radiation have the capability to displace atoms/molecules from their lattice sites, which is the fundamental process that drives the changes in all materials. The effect of irradiation on materials is fixed in the initial event in which an energetic projectile strikes a target. The book is distributed in four sections: Ionic Materials; Biomaterials; Polymeric Materials and Metallic Materials.
Download or read book Lactam based Polyamides written by Rudolf Puffr and published by CRC Press. This book was released on 1991-02-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work examines general relationships among the structures, reactivity, and properties of polyamides important for predictions in such fields as materials science. The team of authors, including polymer research chemists, physicists, and specialists in technology and processing, compiled an extensive amount of literature (over 2300 references) to produce two volumes packed with text, tables, drawings, and first-hand information, much of it never before published. Topics include lactams and their production, properties, analysis, theory, and the technology of their polymerization, in addition to polyamides and their processing, modification, analysis, molecular characterization, structure, physical properties, degradation and stabilization, designing and application of products. Researchers and specialists in the preparation, modification, processing, structure, and properties of linear aliphatic polyamides will find Lactam-Based Polyamides, Volumes I and II to be invaluable texts.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Chemistry of Polymers written by V.S. Ivanov and published by CRC Press. This book was released on 2023-03-08 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the series "New Concepts in Polymer Science", this volume contains information on the main theoretical and practical problems involved in radiation chemistry of polymers. The processes of polymerization and modification of polymers by grafting, crosslinking and degradation, induced by ionizing radiation, are all described, as well as the radiation resistance of polymers and their protection from radiation. The book also contains applications of radiation chemistry of polymers, such as: principles of selection of radiation-chemical processes for industrial use; choice of radiation sources for specific processes; modification of textile and film materials by grafting; manufacturing of heat-shrinkable, thermostable and mechanically strong polymer products; composites; rubber vulcanizates and self-adhesive products; paints and coatings; man-made fibres; materials for microelectronics; and polymer materials for medical purposes.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974-03 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Technologies and Applications in Materials Science written by Subhendu Ray Chowdhury and published by CRC Press. This book was released on 2022-12-30 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains various kinds of non-ionizing and high-energy radiations, their interaction with materials and chemical reactions, and conditions of various kinds of materials development technologies including applications. It covers a processing-structure-property relationship and radiations used in developing many advanced materials used in various fields. It highlights application-oriented materials synthesis and modification covering a wide variety of materials such as plastics, rubber, thermo-set, ceramics, and so forth by various radiations. Features: Explains ionizing and non-ionizing radiation-assisted materials development technologies, for polymers, ceramics, metals, and carbons. Covers radiation-assisted synthesis, processing, and modification of all kinds of materials. Provides comparative studies, merits, demerits, and applications very systematically. Criss-crosses polymers science and technology, radiation technology, advanced materials technology, biomaterials technology, and so forth. Includes a section on 3D printing by LASER melting of CoCr alloys. This book is aimed at researchers and graduate students in materials science, radiation chemistry and physics, and polymer and other materials processing.
Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1974 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.
Download or read book Reactive Modifiers for Polymers written by S. Al-Malaika and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical modification of polymers by reactive modifiers is no longer an academic curiosity but a commercial reality that has delivered a diverse range of speciality materials for niche markets: reactively grafted styrenic alloys, maleated polyolefins, super-tough nylons, silane modified and moisture-cured polyolefins, and thermoplastic elastomers, are but few exam ples of commercial successes. Although the approach of reactive modification of polymers has been largely achieved either in solution or in the solid state (through in situ reactions in polymer melts), it is the latter route that has attracted most attention in the last two decades owing to its flexibility and cost-effective ness. This route, referred to as reactive processing, focuses on the use of suitable reactive modifier(s) and the adoption of conventional polymer processing machinery, an extruder or a mixer, as a chemical reactor, to perform in situ targeted reactions for chemical modification of preformed polymers. This relatively simple, though scientifically highly challenging, approach to reactive modification offers unique opportunities in exploiting various reactive modifiers for the purpose of altering and transforming in a controlled manner the properties of preformed commercial polymers into new/speciality materials with tailor-made properties and custom-designed performance for target applications. Such an economically attractive route constitutes a radical diversion away from the traditional practices of manufacturing new polymers from monomers which involves massive in vestments in sophisticated technologies and chemical plants.
Download or read book Encyclopedia of Polymer Science and Technology Phenolic resins to Polyelectrolytes written by and published by . This book was released on 1969 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isotopes and Radiation Technology written by and published by . This book was released on 1963 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Charged Particle and Photon Interactions with Matter written by Yoshihiko Hatano and published by CRC Press. This book was released on 2010-12-13 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on Mozumder's and Hatano's Charged Particle and Photon Interactions with Matter: Chemical, Physicochemical, and Biological Consequences with Applications (CRC Press, 2004), Charged Particle and Photon Interactions with Matter: Recent Advances, Applications, and Interfaces expands upon the scientific contents of the previous volume by cover
Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.
Download or read book Biopolymers Reuse Recycling and Disposal written by Michael Niaounakis and published by William Andrew. This book was released on 2013-06-20 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers Reuse, Recycling and Disposal is the first book covering all aspects of biopolymer waste management and post-usage scenarios, embracing existing technologies, applications, and the behavior of biopolymers in various waste streams. The book investigates the benefits and weaknesses, social, economic and environmental impacts, and regulatory aspects of each technology. It covers different types of recycling and degradation, as well as life cycle analysis, all supported by case studies, literature references, and detailed information about global patents. Patents in particular—comprising 80% of published technical literature in this emerging field, widely scattered, and often available in Japanese only—are a key source of information. Dr. Niaounakis draws on disciplines such as polymer science, management, biology and microbiology, organic chemistry, environmental chemistry, and patent law to produce a reference guide for engineers, scientists and other professionals involved in the development and production of biopolymers, waste management, and recycling. This information is also valuable for regulators, patent attorneys and academics working in this field. - Explores techniques and technologies involved in managing biopolymers in the waste stream, including recycling and upcycling - Provides waste management and recycling professionals the knowledge they need to plan for the exponential growth in biopolymer waste - Helps engineers and product designers fully consider the end-of-life aspects of their environmentally sustainable 'green' products and solutions
Download or read book Encyclopedia of Chemical Technology written by Anthony Standen and published by . This book was released on 1968 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Membranes for Fuel Cells written by Javaid Zaidi and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the late-1960’s, perfluorosulfonic acid (PFSAs) ionomers have dominated the PEM fuel cell industry as the membrane material of choice. The “gold standard’ amongst the many variations that exist today has been, and to a great extent still is, DuPont’s Nafion® family of materials. However, there is significant concern in the industry that these materials will not meet the cost, performance, and durability requirementsnecessary to drive commercialization in key market segments – es- cially automotive. Indeed, Honda has already put fuel cell vehicles in the hands of real end users that have home-grown fuel cell stack technology incorporating hydrocarbon-based ionomers. “Polymer Membranes in Fuel Cells” takes an in-depth look at the new chem- tries and membrane technologies that have been developed over the years to address the concerns associated with the materials currently in use. Unlike the PFSAs, which were originally developed for the chlor-alkali industry, the more recent hydrocarbon and composite materials have been developed to meet the specific requirements of PEM Fuel Cells. Having said this, most of the work has been based on derivatives of known polymers, such as poly(ether-ether ketones), to ensure that the critical requirement of low cost is met. More aggressive operational requi- ments have also spurred the development on new materials; for example, the need for operation at higher temperature under low relative humidity has spawned the creation of a plethora of new polymers with potential application in PEM Fuel Cells.
