Download or read book Quantum Dot single Wall Carbon Nanotube Complexes for Tunable Optoelectronic Microsystems Sensors written by Brian J. Landi and published by . This book was released on 2006 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Quantum dot-single wall carbon nanotube (QD-SWNT) complexes have been investigated for use in optoelectronic applications. Quantum confinement effects imbue size-dependent properties in nanomaterials which can be controlled during synthesis and exploited in devices. The physical properties inherent to semiconducting quantum dots (QDs) and single-wall carbon nanotubes (SWNTs) render their chemical combination a unique nanomaterial complex for Microsystems. Synthesis proficiency has been demonstrated for two techniques: (1) a pulsed laser vaporization process for SWNTs, and (2) wet chemistry colloidal approaches for CdSe and CuInS2 QDs. A significant fraction of the work in this Dissertation has been devoted to establishing standardized protocols for characterizing the nanomaterial properties using electron microscopy and spectroscopy. In the case of SWNTs, innovative methods have been developed to accurately assess the SWNT purity and monitor the purification steps during thermal oxidation. These results represent the first established metrics of reference for SWNT purity as well as unprecedented levels of purification efficiency. Experimental control over SWNT chiral distributions and QD particle diameter has shown where the size-dependent tunability of their optical bandgap can be used for selective absorption and emission based upon size and structure. Modification of the surface ligands on the QDs has facilitated an investigation of chemical attachment procedures to high purity SWNTs using covalent, electrostatic, and noncovalent reaction schemes. Polymeric photodiodes utilizing successful QD-SWNT complexes were fabricated and have shown the ability for select optical absorption, exciton dissociation, and charge transport. Thus, QD-SWNT complexes represent a new class of nanomaterials which are expected to impact Microsystems optoelectronic applications (e.g.color sensors, lab-on-a-chip spectrometry, smart pixels, etc.) due to wavelength selectivity, absorption sensitivity, and potential for nanoscale fabrication"--Abstract.
Download or read book Carbon Quantum Dots for Sustainable Energy and Optoelectronics written by Sudip Kumar Batabyal and published by Elsevier. This book was released on 2023-01-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Quantum Dots for Sustainable Energy and Optoelectronics reviews the synthesis, properties, and applications of carbon nanodots. This book provides readers with an overview of the key advances in the development of carbon quantum dots including synthesis and surface engineering strategies such as pyrolysis-based synthesis, biomass-based synthesis, functionalization, and other methods toward large-scale development of these carbon nanomaterials. The emerging applications of carbon quantum dots in different fields, such as energy harvesting, energy storage, and biomedical applications, are thoroughly reviewed, emphasizing the impact of enhanced properties of carbon quantum dots for these applications. Carbon Quantum Dots for Sustainable Energy and Optoelectronics is suitable for graduate students, materials scientists, and engineers working in academia and industry. This book is also beneficial for the interdisciplinary community of researchers and practitioners working in the field of nanotechnology. - Introduces recent advances in the understanding of carbon quantum dots, including relevant synthesis and surface engineering strategies for their large-scale development - Provides an overview of the most relevant applications of carbon quantum dots for the development of sustainable technologies in optoelectronics and energy storage and production - Discusses future research directions and remaining challenges towards the commercial translation of carbon quantum dots
Download or read book Quantum Dot Optoelectronic Devices written by Peng Yu and published by Springer Nature. This book was released on 2020-04-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures cutting-edge research in semiconductor quantum dot devices, discussing preparation methods and properties, and providing a comprehensive overview of their optoelectronic applications. Quantum dots (QDs), with particle sizes in the nanometer range, have unique electronic and optical properties. They have the potential to open an avenue for next-generation optoelectronic methods and devices, such as lasers, biomarker assays, field effect transistors, LEDs, photodetectors, and solar concentrators. By bringing together leaders in the various application areas, this book is both a comprehensive introduction to different kinds of QDs with unique physical properties as well as their preparation routes, and a platform for knowledge sharing and dissemination of the latest advances in a novel area of nanotechnology.
Download or read book Quantum Dot Sensors written by John Callan and published by CRC Press. This book was released on 2013-01-24 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consisting of six chapters, written by experts in their field, this book charts the progress made in the use of quantum dots as the signaling component in optical sensors since their discovery in the early 1980s. In particular, it focuses on CdS-, CdSe-, and CdTe-type QDs due to their emission in the visible region of the electromagnetic spectrum. The book begins by detailing the range of methods currently used for the preparation and passivation of core/core–shell quantum dots and follows with a discussion on their electrochemical properties and potential toxicity. The book culminates by focusing on how electron and energy transfer mechanisms can be utilized to generate a range of quantum dot-based probes. This is the first text of its kind dedicated to quantum dot-based sensors and will appeal to those readers who have an interest in working with these versatile nanoparticles.
Download or read book High Performance Carbon Based Optoelectronic Nanodevices written by Yanjie Su and published by Springer Nature. This book was released on 2021-09-15 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the photoelectric nanodevices based on carbon nanostructures, such as carbon nanotubes, graphene and related heterojunctions. The synthesis of carbon nanostructures and device fabrication are simply given. The interface charge transfer and the performance enhancement in the photodetectors and solar cells are comprehensively introduced. Importantly, carbon allotropes behave as high-mobility conductors or bandgap-tunable semiconductors depending on the atomic arrangements, the direct motivation is to fabricate all-carbon nanodevices using these carbon nanomaterials as building blocks. The photoelectric nanodevices based on all-carbon nanostructures have increasingly attracted attention in the future. The book offers a valuable reference guide to carbon-based photoelectric devices for researchers and graduate school students in the field. It will also benefit all researchers who investigate photoelectric nanodevices and photoelectric conversion with relevant frontier theories and concepts.
Download or read book Quantum Dots Nanoparticles and Nanowires Volume 789 written by P. Guyot-Sionnest and published by . This book was released on 2004-05-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructures of semiconductors and metals show novel optical and transport properties, and offer the perspective of designing materials properties with unprecedented flexibility and control. This has motivated research in the synthesis and characterization of new materials. This 2004 book brings together scientists with various levels of expertise in the growth, characterization and applications of inorganic nanostructures, such as quantum dots, nanowires and nanorods, to discuss and share developments in the field. Reports focus on techniques to prepare and characterize novel materials, investigations of novel optical and electronic properties, and novel applications, such as those that are biologically inspired. Topics include: synthesis and characterization of semiconductor quantum dots, nanoparticles and nanowires using wet chemistry and molecular beam approaches; synthesis, characterization and novel properties of metallic nanostructures; optical properties of neutral and charged excitons and exciton complexes in self-assembled quantum dots; nanoscale devices and sensors based on nanostructures and their properties; and design and characterization of quantum dot-bioconjugates and their use in assay developments.
Download or read book Quantum Optics with Single wall Carbon Nanotubes written by Christophe Galland and published by . This book was released on 2010 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Handbook of Nanofibers written by Ahmed Barhoum and published by Springer. This book was released on 2019-09-10 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers all aspects related to Nanofibers, from the experimental set-up for their fabrication to their potential industrial applications. It describes several kinds of nanostructured fibers such as metal oxides, natural polymers, synthetic polymers and hybrid inorganic-polymers or carbon-based materials. The first part of the Handbook covers the fundamental aspects, experimental setup, synthesis, properties and physico-chemical characterization of nanofibers. Specifically, this part details the history of nanofibers, different techniques to design nanofibers, self-assembly in nanofibers, critical parameters of synthesis, fiber alignment, modeling and simulation, types and classifications of nanofibers, and signature physical and chemical properties (i.e. mechanical, electrical, optical and magnetic), toxicity and regulations, bulk and surface functionalization and other treatments to allow them to a practical use. Characterization methods are also deeply discussed here. The second part of the Handbook deals with global markets and technologies and emerging applications of nanofibers, such as in energy production and storage, aerospace, automotive, sensors, smart textile design, energy conversion, tissue engineering, medical implants, pharmacy and cosmetics. Attention is given to the future of research in these areas in order to improve and spread the applications of nanofibers and their commercialization.
Download or read book Applications of Nanomaterials in Sensors and Diagnostics written by Adisorn Tuantranont and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the synthesis of nanomaterials and our fundamental understanding of their properties has led to significant advances in nanomaterial-based gas, chemical and biological sensors. Leading experts around the world highlight the latest findings on a wide range of nanomaterials including nanoparticles, quantum dots, carbon nanotubes, molecularly imprinted nanostructures or plastibodies, nanometals, DNA-based structures, smart nanomaterials, nanoprobes, magnetic nanomaterials, organic molecules like phthalocyanines and porphyrins, and the most amazing novel nanomaterial, called graphene. Various sensing techniques such as nanoscaled electrochemical detection, functional nanomaterial-amplified optical assays, colorimetry, fluorescence and electrochemiluminescence, as well as biomedical diagnosis applications, e.g. for cancer and bone disease, are thoroughly reviewed and explained in detail. This volume will provide an invaluable source of information for scientists working in the field of nanomaterial-based technology as well as for advanced students in analytical chemistry, biochemistry, electrochemistry, material science, micro- and nanotechnology.
Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.
Download or read book Carbon Based Material for Environmental Protection and Remediation written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Material for Environmental Protection and Remediation presents an overview of carbon-based technologies and processes, and examines their usefulness and efficiency for environmental preservation and remediation. Chapters cover topics ranging from pollutants removal to new processes in materials science. Written for interested readers with strong scientific and technological backgrounds, this book will appeal to scientific advisors at private companies, academics, and graduate students.
Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Download or read book Introduction to Focused Ion Beams written by Lucille A. Giannuzzi and published by Springer Science & Business Media. This book was released on 2006-05-18 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Focused Ion Beams is geared towards techniques and applications. This is the only text that discusses and presents the theory directly related to applications and the only one that discusses the vast applications and techniques used in FIBs and dual platform instruments.
Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.
Download or read book Metal Nanoparticles in Microbiology written by Mahendra Rai and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following an introduction to biogenic metal nanoparticles, this book presents how they can be biosynthesized using bacteria, fungi and yeast, as well as their potential applications in biomedicine. It is shown that the synthesis of nanoparticles using microbes is eco-friendly and results in reproducible metal nanoparticles of well-defined sizes, shapes and structures. This biotechnological approach based on the process of biomineralization exploits the effectiveness and flexibility of biological systems. Chapters include practical protocols for microbial synthesis of nanoparticles and microbial screening methods for isolating a specific nanoparticle producer as well as reviews on process optimization, industrial scale production, biomolecule-nanoparticle interactions, magnetosomes, silver nanoparticles and their numerous applications in medicine, and the application of gold nanoparticles in developing sensitive biosensors.
