Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.

Download or read book Digital Control Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks.

Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 1996-02-23 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the biggest, most comprehensive, and most prestigious compilation of articles on control systems imaginable. Every aspect of control is expertly covered, from the mathematical foundations to applications in robot and manipulator control. Never before has such a massive amount of authoritative, detailed, accurate, and well-organized information been available in a single volume. Absolutely everyone working in any aspect of systems and controls must have this book!

Download or read book Digital Controller Implementation and Fragility written by Robert Istepanian and published by Springer Science & Business Media. This book was released on 2001-09-26 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading researchers, this book collects a number of articles considering the problems of finite-precision computing in digital controllers and filters. Topics range from analysis of fragility and finite-precision effects to the design of low-complexity digital controllers.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XIX written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume X written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Control Systems Robotics and AutomatioN Volume XII written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XXII written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR

Download or read book The Control Handbook three volume set written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition brilliantly organizes cutting-edge contributions from more than 200 leading experts representing every corner of the globe. They cover everything from basic closed-loop systems to multi-agent adaptive systems and from the control of electric motors to the control of complex networks. Progressively organized, the three volume set includes: Control System Fundamentals Control System Applications Control System Advanced Methods Any practicing engineer, student, or researcher working in fields as diverse as electronics, aeronautics, or biomedicine will find this handbook to be a time-saving resource filled with invaluable formulas, models, methods, and innovative thinking. In fact, any physicist, biologist, mathematician, or researcher in any number of fields developing or improving products and systems will find the answers and ideas they need. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances.

Download or read book Control System Fundamentals written by William S. Levine and published by CRC Press. This book was released on 2019-01-15 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sifting through the variety of control systems applications can be a chore. Diverse and numerous technologies inspire applications ranging from float valves to microprocessors. Relevant to any system you might use, the highly adaptable Control System Fundamentals fills your need for a comprehensive treatment of the basic principles of control system engineering. This overview furnishes the underpinnings of modern control systems. Beginning with a review of the required mathematics, major subsections cover digital control and modeling. An international panel of experts discusses the specification of control systems, techniques for dealing with the most common and important control system nonlinearities, and digital implementation of control systems, with complete references. This framework yields a primary resource that is also capable of directing you to more detailed articles and books. This self-contained reference explores the universal aspects of control that you need for any application. Reliable, up-to-date, and versatile, Control System Fundamentals answers your basic control systems questions and acts as an ideal starting point for approaching any control problem.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XIII written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XXI written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.

Download or read book Computer Controlled Systems written by G. Perdikaris and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the book is to provide advanced undergraduate or frrst-year graduate engineering students with a self-contained presentation of the principles fundamental to the analysis, design and implementation of computer controlled systems. The material is also suitable for self-study by practicing engineers and is intended to follow a first course in either linear systems analysis or control systerns. A secondary objective of the book is to provide engineering and/or computer science audiences with the material for a junior/senior-level course in modern systems analysis. Chapters 2, 3, 4, and 5 have been designed with this purposein rnind. The emphasis in such a course is to develop the rnathernatical tools and methods suitable for the analysis and design of real-time systems such as digital filters. Thus, engineers and/or computer scientists who know how to program computers can understand the mathematics relevant to the issue of what it is they are programrning. This is especially important for those who may work in engineering and scientific environments where, for instance, programrning difference equations for real-time applications is becorning increasingly common. A background in linear algebra should be an adequate prerequisite for the systems analysis course. Chapter 1 of the book presents a brief introduction to computer controlled systems. It describes the general issues and terminology relevant to the analysis, design, and implementation of such systems.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume V written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.