Download or read book Quantifying Using Centrifuge of Variables Governing the Swelling of Clays written by Trevor Meade Walker and published by . This book was released on 2012 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Austin, Texas consists of highly expansive soils that have caused failures in many structures. Minimizing the detrimental effects of expansive soils on structures requires that the swelling of these soil(s) is quantified accurately, efficiently, and timely. A testing procedure was developed to directly measure soil swelling using centrifuge technology by Plaisted, 2009. This testing procedure was developed in order to reduce the test duration while generating more swelling data relative to conventional tests that directly measure swell. However, the new procedure was incapable of obtaining in-flight swell data, resulting in the need to develop a procedure to directly measure swell during centrifugation. The objectives of this study were to update the testing procedure developed by Plaisted, 2009 by incorporating the use of an in-flight Data Acquisition System (DAS) that would produce accurate and repeatable results; and use the updated testing procedure to quantify the effects of compaction conditions on swelling for three expansive soils in the Austin area (Eagle Ford Shale, Houston Black Clay, and Taylor Clay). A DAS consisting of linear position sensors, analog to digital converters, JeeNode Arduinos, and an accelerometer was developed and installed within the centrifuge. Specimens were compacted at various water contents, and densities, and subjected to different g-levels. The effects of g-level, compaction water content, compaction dry unit weight, and soil type were determined by comparing the 34 hour swell percentages for the compacted specimens. The results of this study showed that in-flight monitoring of clay swelling could be successfully implemented in a comparatively small centrifuge, and that the data collected from the DAS was accurate and repeatable. Swelling of tested soils was found to be sensitive to changes in water content around optimum, with specimens compacted wet of optimum swelling less than specimens compacted dry of optimum. A 6% increase in relative compaction was found to negligibly affect the swelling. Finally, variations in confinement and compaction conditions were found to have a greater effect on swelling for soils that are more expansive in nature compared to soils less expansive in nature.
Download or read book Characterization of the Swelling Behavior of Expansive Clays Using Centrifuge Technology written by Nicolas Alejandro Rivas and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental techniques with emphasis in centrifuge testing were implemented to characterize the swelling behavior of expansive clays. This research consisted in three self-contained sections related to the study of different aspects of expansive clays. The first research component focused on the implementation of a qualitative mineralogy analysis performed using x-ray diffraction to determine the main clay minerals in an expansive soil. The analysis was performed on the clay-sized fraction of the soil and samples with preferential and random orientation were used in the analysis. Vacuum filtration was used to produce oriented samples in order to maximize the intensity of the diagnostic basal spacing of the clay minerals, and samples were subjected to different treatments to produce changes in the basal spacing or crystalline structure of the clay minerals to facilitate their identification. The second research component examined the effect of the coarse fraction on the swelling characteristics of expansive soils using a centrifuge-based approach. Vertical strains at the end of primary swelling were evaluated for different proportions of coarse fraction by volume. It was found that the magnitude of vertical strains at the end of primary swelling decreased with increasing coarse fraction. It was concluded that the swelling depended uniquely on the ratio between the volume of soil solids of the fine fraction and the volume of voids. Additionally, when correcting the initial void ratio of the specimens to account for this, the relationship between vertical strains at the end of primary swelling and initial void ratio for the soil mixtures defines a unique linear trend with the baseline material. The third research component examined the potential vertical rise at three field sites in Central Texas. Method 6048-A was applied to evaluate the PVR of three field sites using direct measurements of the swelling characteristics of soils sampled at each location. Project-specific data was generated in a relatively short time using this centrifuge-based method. The results obtained demonstrated the need for testing of project-specific samples, as a significant variation in PVR was observed in Site 2 and 3 between boring locations, while less variation between borings was found in Site 1
Download or read book Implementation of Centrifuge Testing for Swelling Properties of Highly Plastic Clays written by Jorge G. Zornberg and published by . This book was released on 2013 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel centrifuge-testing device was developed for characterization of expansive soils, which are the source of major pavement design and maintenance problems across the state. Specifically, testing protocols were developed for use of a small centrifuge device to provide direct measurement of the vertical swelling of clays. In this test, soil samples are subjected to water infiltration during a comparatively short testing period. The centrifuge approach is well suited for pavement design because it provides not only one data point for a single normal stress but the entire relationship between vertical strains and vertical stresses. This feature represents a significant advantage over conventional swelling tests, which are prohibitively long; in addition, each conventional test provides the vertical strain for one vertical stress. Consequently, this approach is particularly well suited for use with the Potential Vertical Raise (PVR) approach. The objective of this project is to quantify the benefits and implement the new centrifuge technology for characterization of expansive clays in Texas. This research team will achieve this objective by implementing the laboratory procedure developed as part of Research Project 0-6048 using multiple clay sources, developing a spreadsheet with swelling curves (vertical strain versus normal stress) for relevant high-plasticity clays in Texas, incorporating the use of swelling curves obtained using centrifuge technology into the PVR methodology, and developing training material that includes examples of practical problems for calculation of the PVR using actual swelling curves and actual subgrade profiles.
Download or read book Characterization of the Swelling Potential of Expansive Clays Using Centrifuge Technology written by Jeffrey Albin Kuhn and published by . This book was released on 2010 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The characterization of the swell potential of expansive clay is complicated by the fact that traditional swell testing methods require an excessive amount of time for specimens to swell to their maximum heights. As a result, the practicing engineer has typically referred to correlations between swell potential and index properties rather than directly measuring swelling in a laboratory experiment. The purpose of this study is to evaluate an alternate testing method using a geotechnical centrifuge in an attempt to decrease the time required to evaluate the swell potential of expansive clays so that expermientally obtained swelling properties may be obtained within a reasonable time period. This study includes an experimental program involving a series of tests in which compacted clay specimens are flown in a cetrifuge and their heights are monitored as water infiltrates into them.
Download or read book Characterization of the Swelling Properties of Highly Plastic Clays Using Centrifuge Technology written by Jorge G. Zornberg and published by . This book was released on 2009 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book From Research to Applied Geotechnics written by N.P. López-Acosta and published by IOS Press. This book was released on 2019-11-26 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE) was held in Mexico in 1959. Every 4 years since then, PCSMGE has brought together the geotechnical engineering community from all over the world to discuss the problems, solutions and future challenges facing this engineering sector. Sixty years after the first conference, the 2019 edition returns to Mexico. The XVI PCSMGE 2019 conference was held in Cancun, Mexico, from 17 – 20 November 2019. This book presents the plenary lectures from the conference, delivered by distinguished geotechnical engineers of international renown. Experience and youth combine in this special publication, which includes the 9th Arthur Casagrande lecture, the plenary lecture of the ISSMGE President, 3 Bright Spark lectures, and the manuscripts of the 13 invited lecturers of practically all the technical sessions at the XVI PCSMGE 2019. Topics cover both research and applied geotechnics, including recent developments in geotechnical engineering. Representing a valuable reference for engineering practitioners and graduate students, and helping to identify new issues and shape future directions for research, the book will be of interest to all those working in the field, involved in soil mechanics and geotechnical engineering.
Download or read book Proceedings Soil Science Society of America written by Soil Science Society of America and published by . This book was released on 1970 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Permeability and Groundwater Contaminant Transport written by and published by ASTM International. This book was released on 1981 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.
Download or read book Diagnosis and Improvement of Saline and Alkali Soils written by L. E. Allison and published by . This book was released on 1969 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clay Materials for Environmental Remediation written by Suryadi Ismadji and published by Springer. This book was released on 2015-03-24 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of environmental remediation is presented with an emphasis on the role of clay minerals in water purification. In the first chapter, important aspects of environmental problems and possible solutions are discussed. In the second chapter, the application of natural clay minerals as environmental cleaning agents are explained. The discussion is focused on the role of different types of clay materials in hazardous substance removal from air, aqueous solutions, wastewater, aquaculture, ground water, etc. In the next chapter, the modification of clay materials is explored including the preparation of clay composite materials for environmental remediation. Various aspects of clay material modifications and the effects of clay surface chemistry on the removal of hazardous material is also discussed. Next, the equilibrium and kinetics of hazardous substance adsorption is presented. This chapter summarizes recent studies on the removal of hazardous substances from aqueous solutions and the environment using various types of clay minerals. The brief also includes various models used in adsorption studies and touches on the characterization of clay minerals.
Download or read book Industrial Minerals and Rocks written by Society of Mining Engineers of AIME. and published by . This book was released on 1983 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Neural Computing Applications written by Alianna J. Maren and published by Academic Press. This book was released on 2014-05-10 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Neural Computing Applications is a collection of articles that deals with neural networks. Some papers review the biology of neural networks, their type and function (structure, dynamics, and learning) and compare a back-propagating perceptron with a Boltzmann machine, or a Hopfield network with a Brain-State-in-a-Box network. Other papers deal with specific neural network types, and also on selecting, configuring, and implementing neural networks. Other papers address specific applications including neurocontrol for the benefit of control engineers and for neural networks researchers. Other applications involve signal processing, spatio-temporal pattern recognition, medical diagnoses, fault diagnoses, robotics, business, data communications, data compression, and adaptive man-machine systems. One paper describes data compression and dimensionality reduction methods that have characteristics, such as high compression ratios to facilitate data storage, strong discrimination of novel data from baseline, rapid operation for software and hardware, as well as the ability to recognized loss of data during compression or reconstruction. The collection can prove helpful for programmers, computer engineers, computer technicians, and computer instructors dealing with many aspects of computers related to programming, hardware interface, networking, engineering or design.
Download or read book Handbook of Flotation Reagents Chemistry Theory and Practice written by Srdjan M. Bulatovic and published by Elsevier. This book was released on 2007-02-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Flotation Reagents: Chemistry, Theory and Practice is a condensed form of the fundamental knowledge of chemical reagents commonly used in flotation and is addressed to the researchers and plant metallurgists who employ these reagents. Consisting of three distinct parts: 1) provides detailed description of the chemistry used in mineral processing industry; 2) describes theoretical aspects of the action of flotation reagents3) provides information on the use of reagents in over 100 operating plants treating Cu, Cu/Zn, Cu/Pb, Zn, Pb/Zn/Ag, Cu/Ni and Ni ores.* Looks at the theoretical aspects of flotation reagents* Examines the practical aspects of using chemical reagents in operating plants* Provides guidelines for researchers and engineers involved in process design and development
Download or read book Soil Mineralogy with Environmental Applications written by Joe Boris Dixon and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few books achieve a connection between scientifc theory and real world environmental problems, but this one does. Generous use of color images, exercises, and case studies make it friendly for the classroom or non-mineralogist. Discover crystallography, surface chemistry, mineral-solution equilibria, organic matter, and soil mineral analysis. The book includes a lengthy exploration of world-wide applications of mineralogy in soil taxonomy, tectonics, radionuclides, pesticides, enzymes, and more.
Download or read book Water Quality Assessments written by Deborah V Chapman and published by CRC Press. This book was released on 1996-08-22 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidebook, now thoroughly updated and revised in its second edition, gives comprehensive advice on the designing and setting up of monitoring programmes for the purpose of providing valid data for water quality assessments in all types of freshwater bodies. It is clearly and concisely written in order to provide the essential information for all agencies and individuals responsible for the water quality.
Download or read book Geo frontiers 2011 written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
