Download or read book FPGA based Prototyping Methodology Manual written by Doug Amos and published by Happy About. This book was released on 2011 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the best practices FPGA-based Prototyping of SoC and ASIC devices into one place for the first time, drawing upon not only the authors' own knowledge but also from leading practitioners worldwide in order to present a snapshot of best practices today and possibilities for the future. The book is organized into chapters which appear in the same order as the tasks and decisions which are performed during an FPGA-based prototyping project. We start by analyzing the challenges and benefits of FPGA-based Prototyping and how they compare to other prototyping methods. We present the current state of the available FPGA technology and tools and how to get started on a project. The FPMM also compares between home-made and outsourced FPGA platforms and how to analyze which will best meet the needs of a given project. The central chapters deal with implementing an SoC design in FPGA technology including clocking, conversion of memory, partitioning, multiplexing and handling IP amongst many other subjects. The important subject of bringing up the design on the FPGA boards is covered next, including the introduction of the real design into the board, running embedded software upon it in and debugging and iterating in a lab environment. Finally we explore how the FPGA-based Prototype can be linked into other verification methodologies, including RTL simulation and virtual models in SystemC. Along the way, the reader will discover that an adoption of FPGA-based Prototyping from the beginning of a project, and an approach we call Design-for-Prototyping, will greatly increase the success of the prototype and the whole SoC project, especially the embedded software portion. Design-for-Prototyping is introduced and explained and promoted as a manifesto for better SoC design. Readers can approach the subjects from a number of directions. Some will be experienced with many of the tasks involved in FPGA-based Prototyping but are looking for new insights and ideas; others will be relatively new to the subject but experienced in other verification methodologies; still others may be project leaders who need to understand if and how the benefits of FPGA-based prototyping apply to their next SoC project. We have tried to make each subject chapter relatively standalone, or where necessary, make numerous forward and backward references between subjects, and provide recaps of certain key subjects. We hope you like the book and we look forward to seeing you on the FPMM on-line community soon (go to www.synopsys.com/fpmm).

Download or read book The Prototyping Methodology written by Kenneth E. Lantz and published by . This book was released on 1985 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Prototyping written by Reinhard Budde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prototyping is an approach used in evolutionary system development. In this book, the authors show which forms of prototyping can be employed to tackle which problems. They take a look at the tools used in everyday software development with a view to determining their suitability for prototyping, and attempt to elucidate prototyping as a methodological concept. Part I of the book looks at prototyping as an approach for constructing and evaluating models. Traditional approaches and phase-oriented life cycle plans are discussed. Prototyping overcomes fundamental problems associated with life cycle plans. The authors present their own concept of evolutionary system development. Part II shows to what extent technical support of evolutionary system development is possible. Various tools for supporting prototyping are discussed and prospective trends are indicated. Criteria are listed to help the reader choose between the various development environments currently available or likely to become available in the near future. Case studies are used to illustrate how prototype construction can be integrated in software projects.

Download or read book Web Engineering written by Woojong Suh and published by IGI Global. This book was released on 2005-01-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although based primarily on MIS and computer science areas, Web engineering covers a wide range of disciplines, thus making it difficult to gain an understanding of the field. Web Engineering: Principles and Techniques provides clarity to this often muddied issue.

Download or read book Better Software Faster written by Tom De Schutter and published by Happy About. This book was released on 2014-03-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent rise of "smart" products has been made possible through tight co-design of hardware and software. The growing amount of software and hence processors in applications all around us allows for increased flexibility in the application functionality through its life cycle. Not so long ago a device felt outdated after you owned it for a couple of months. Today, a continuous stream of new software applications and updates make products feel truly "smart". The result is an almost magical user experience where the same product can do more today than it could do yesterday.

In this book we dive deep into a key methodology to enable concurrent hardware/software development by decoupling the dependency of the software development from hardware availability: virtual prototyping. The ability to start software development much earlier in the design cycle drives a true "shift-left" of the entire product development schedule and results in better products that are available earlier in the market.

Throughout the book, case studies illustrate how virtual prototypes are being deployed by major companies around the world. If you are interested in a quick feel for what virtual prototyping has to offer for practical deployment, we recommend picking a few case studies to read, before diving into the details of the methodology.

Of course, this book can only offer a small snapshot of virtual prototype use cases for faster software development. However, as most software bring-up, debug and test principles are similar across markets and applications, it is not hard to realize why virtual prototypes are being leveraged whenever software is an intrinsic part of the product functionality, after reading this book.

Download or read book Encyclopedia of Computer Science and Technology written by Allen Kent and published by CRC Press. This book was released on 1989-11-07 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive reference work provides immediate, fingertip access to state-of-the-art technology in nearly 700 self-contained articles written by over 900 international authorities. Each article in the Encyclopedia features current developments and trends in computers, software, vendors, and applications...extensive bibliographies of leading figures in the field, such as Samuel Alexander, John von Neumann, and Norbert Wiener...and in-depth analysis of future directions."

Download or read book Prototyping and Modelmaking for Product Design written by Bjarki Hallgrimsson and published by Hachette UK. This book was released on 2023-03-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, Prototyping and Modelmaking for Product Design, by practising product development consultant Bjarki Hallgrimsson, is essential reading for both students and design professionals. Prototyping and ModelMaking for Product Design goes behind the scenes to illustrates how prototypes are used to help designers understand problems better, explore more imaginative solutions, investigate human interaction more fully and test functionality so as to de-risk the design process. Following an introduction on the purpose of prototyping, specific materials, tools and techniques are examined in detail, with step-by-step tutorials and industry examples of real and successful products illustrating how prototypes are used to help solve design problems. Workflow is also discussed, using a mixture of hands-on and digital tools. This new edition includes case studies representing technological developments such as prototyping user experience and interactive electronic products, as well as a new expanded section on digital modelmaking tools, including 3D printing and laser cutting. The first chapters of the book explain why prototyping is so important to the design process. The many uses of prototyping will be shown in the context of several comprehensive projects by some of the world's leading design firms. The second part is an introduction to the typical materials used by designers in their prototyping efforts and how to work with them. In all cases, the approach is to use digital and manual tools in a complementary and effective fashion. Tutorials were specifically developed that underline the back and forth of digital and manual ways of working. The emphasis is on the kinds of construction that can be done by the designers themselves. Health and safety is stressed in terms of personal responsibility and awareness. Topics covered include:Definition of prototyping and modelmakingPrototyping as a form of problem solvingModelmakingPhysical and digital prototypesBuidling by hand and using digital technologies

Download or read book Prototyping for Designers written by Kathryn McElroy and published by "O'Reilly Media, Inc.". This book was released on 2016-12-29 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prototyping and user testing is the best way to create successful products, but many designers skip this important step and use gut instinct instead. By explaining the goals and methodologies behind prototyping—and demonstrating how to prototype for both physical and digital products—this practical guide helps beginning and intermediate designers become more comfortable with creating and testing prototypes early and often in the process. Author Kathryn McElroy explains various prototyping methods, from fast and dirty to high fidelity and refined, and reveals ways to test your prototypes with users. You’ll gain valuable insights for improving your product, whether it’s a smartphone app or a new electronic gadget. Learn similarities and differences between prototyping for physical and digital products Know what fidelity level is needed for different prototypes Get best practices for prototyping in a variety of mediums, and choose which prototyping software or components to use Learn electronics prototyping basics and resources for getting started Write basic pseudocode and translate it into usable code for Arduino Conduct user tests to gain insights from prototypes

Download or read book Approaches to Prototyping written by R. Budde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This conference will focus on the user-oriented development of information systems. Against a background of recent concepts for the implementation of distributed systems based on workstation computers, various communicational, organizational and social issues gain increasing importance in the construct ion of computer based information systems. There is an urgent need to integrate end-users and other affected groups into the development process. New strategies for system development are thus needed. " This was the beginning of the Call for Papers to the Working Conference on Prototyping. Working in the fields of user-oriented software construct ion and the analysis of communication problems between developers and users we, that is the GMD team involved in this conference and in preparing its Proceedings, sooner or later came across various new concepts to overcome the problems sketched above. Concepts focusing on the quick construct ion of an operative system such as "rapid prototyping" or concepts aiming at the human and organizational side of the development process such as "Systemeering". Even on a second look, the multitude of different approaches, terms and tools still caused confusion. But despite the differences every concept seemed to have something to do with "Prototyping". This, however, proved to be of little help to us, because the term "Prototyping" itself turned out to be quite "fuzzy". In this obviously confused situation we decided that it was time for a working con ference.

Download or read book Rapid Prototyping Software for Avionics Systems written by Nicolas Larrieu and published by John Wiley & Sons. This book was released on 2014-12-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design, implementation and validation of avionics and aeronautical systems have become extremely complex tasks due to the increase of functionalities that are deployed in current avionics systems and the need to be able certify them before putting them into production. This book proposes a methodology to enable the rapid prototyping of such a system by considering from the start the certification aspects of the solution produced. This method takes advantage of the model-based design approaches as well as the use of formal methods for the validation of these systems. Furthermore, the use of automatic software code generation tools using models makes it possible to reduce the development phase as well as the final solution testing. This book presents, firstly, an overview of the model-based design approaches such as those used in the field of aeronautical software engineering. Secondly, an original methodology that is perfectly adapted to the field of aeronautical embedded systems is introduced. Finally, the authors illustrate the use of this method using a case study for the design, implementation and testing of a new generation aeronautical router.

Download or read book Software Quality written by Daniel Galin and published by John Wiley & Sons. This book was released on 2018-02-15 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a comprehensive discussion on software quality issues and software quality assurance (SQA) principles and practices, and lays special emphasis on implementing and managing SQA. Primarily designed to serve three audiences; universities and college students, vocational training participants, and software engineers and software development managers, the book may be applicable to all personnel engaged in a software projects Features: A broad view of SQA. The book delves into SQA issues, going beyond the classic boundaries of custom-made software development to also cover in-house software development, subcontractors, and readymade software. An up-to-date wide-range coverage of SQA and SQA related topics. Providing comprehensive coverage on multifarious SQA subjects, including topics, hardly explored till in SQA texts. A systematic presentation of the SQA function and its tasks: establishing the SQA processes, planning, coordinating, follow-up, review and evaluation of SQA processes. Focus on SQA implementation issues. Specialized chapter sections, examples, implementation tips, and topics for discussion. Pedagogical support: Each chapter includes a real-life mini case study, examples, a summary, selected bibliography, review questions and topics for discussion. The book is also supported by an Instructor’s Guide.

Download or read book Design User Experience and Usability Design Discourse written by Aaron Marcus and published by Springer. This book was released on 2015-07-20 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 9186, 9187, and 9188 constitutes the proceedings of the 4th International Conference on Design, User Experience, and Usability, DUXU 2015, held as part of the 17th International Conference on Human-Computer Interaction, HCII 2015, in Los Angeles, CA, USA, in August 2015, jointly with 13 other thematically similar conferences. The total of 1462 papers and 246 posters presented at the HCII 2015 conferences were carefully reviewed and selected from 4843 submissions. These papers address the latest research and development efforts and highlight the human aspects of design and use of computing systems. The papers accepted for presentation thoroughly cover the entire field of Human-Computer Interaction, addressing major advances in knowledge and effective use of computers in a variety of application areas. The total of 132 contributions included in the DUXU proceedings were carefully reviewed and selected for inclusion in this three-volume set. The 61 papers included in this volume are organized in topical sections on design thinking, user experience design and usability methods and tools, DUXU management and practice, emotional and persuasion design, and storytelling, narrative and fiction in DUXU.

Download or read book Rapid Prototyping of Application Specific Signal Processors written by Mark A. Richards and published by Springer Science & Business Media. This book was released on 1997-02-28 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping of Application Specific Signal Processors presents leading-edge research that focuses on design methodology, infrastructure support and scalable architectures developed by the 150 million dollar DARPA United States Department of Defense RASSP Program. The contributions to this edited work include an introductory overview chapter that explains the origin, concepts and status of this effort. The RASSP Program is a multi-year DARPA/Tri-Service initiative intended to dramatically improve the process by which complex digital systems, particularly embedded signal processors, are designed, manufactured, upgraded and supported. This program was originally driven by military applications for signal processing. The requirements of military applications for real-time signal processing are typically more demanding than those of commercial applications, but the time gap between technology employed in advanced military prototypes and commercial products is narrowing rapidly. The research on methodologies, infrastructure and architectures presented in this book is applicable to commercial signal processing systems that are in design now, or will be developed before the end of the decade. Rapid Prototyping of Application Specific Signal Processors is a valuable reference for developers of embedded digital systems, particularly systems engineers for signal processing systems (such as digital TV, biomedical image processing systems and telecommunications) and for military contractors who are developing signal processing systems. This book will also be of interest to managers who are charged with responsibility for creating and maintaining environments and infrastructures for developing large embedded digital systems. The chief value for managers will be the defining of methods and processes that reduce development time and cost.

Download or read book Effective Methods for Software Testing CafeScribe written by William E. Perry and published by John Wiley & Sons. This book was released on 2007-03-31 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the founder and executive director of the Quality Assurance Institute, which sponsors the most widely accepted certification program for software testing Software testing is a weak spot for most developers, and many have no system in place to find and correct defects quickly and efficiently This comprehensive resource provides step-by-step guidelines, checklists, and templates for each testing activity, as well as a self-assessment that helps readers identify the sections of the book that respond to their individual needs Covers the latest regulatory developments affecting software testing, including Sarbanes-Oxley Section 404, and provides guidelines for agile testing and testing for security, internal controls, and data warehouses CD-ROM with all checklists and templates saves testers countless hours of developing their own test documentation Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

Download or read book Rethink Prototyping written by Christoph Gengnagel and published by Springer. This book was released on 2015-11-18 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid Prototyping” developed new prototyping approaches to validate and evaluate holistically developed systems with their services, infrastructure and business models. “Blended Prototyping” addressed a new technique whereby prototypes for user interfaces of software applications can be generated from hand drawings and immediately be tested. “Beyond Prototyping” examined the issue of the prototype in connection with algorithmically generated design for producing tailor-made products.

Download or read book Computerworld written by and published by . This book was released on 1986-04-07 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 40 years, Computerworld has been the leading source of technology news and information for IT influencers worldwide. Computerworld's award-winning Web site (Computerworld.com), twice-monthly publication, focused conference series and custom research form the hub of the world's largest global IT media network.

Download or read book Information Technology Management and Organizational Innovations written by Mehdi Khosrowpour and published by IGI Global. This book was released on 1996-01-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging information technologies of the past few decades are now providing organizations with new tools to develop innovative organizational concepts and applications. This book is a collection of timely research and practical papers on the subject of IT management and its role in organizational innovation.