Download or read book Propylene from Naphtha via Steam Cracking Cost Analysis Propylene E71B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing Propylene to ethylene ratio. Besides PG Propylene and PG ethylene, the process also generates pygas and a mixed C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E71B written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process In this process, naphtha is thermally cracked in pyrolysis furnaces at high severity conditions to maximize Ethylene yield. In addition to Ethylene, the process also generates polymer grade propylene, pygas and a mixed C4s stream as by-products. Products separation follows a front-end demethanization sequence. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways:* Pathway 1: Propylene Production from Light Naphtha* Pathway 2: Propylene Production from Ethylene and Butenes* Pathway 3: Propylene Production from Propane (with Hydrogen Generation)Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT
Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a free full sample report offered by Intratec Solutions to demonstrate, in advance, the type of information you will get when you buy one of our reports, offering the same standard and structure (types of graphs, tables and descriptions) that you will find in all of our Cost Analysis Overview reports. This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways: * Pathway 1: Propylene Production from Light Naphtha * Pathway 2: Propylene Production from Ethylene and Butenes * Pathway 3: Propylene Production from Propane (with Hydrogen Generation) Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway - An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT
Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E72A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing propylene to Ethylene ratio. Besides PG Ethylene and PG propylene, the process also generates pygas and a mixed C4s stream as by-products. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E72B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing propylene to Ethylene ratio. In addition to PG Ethylene and PG propylene, the process also generates pygas and a mixed C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Propylene Production from Light Naphtha Cost Analysis Propylene E73B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from light naphtha feedstock using a catalytic cracking process. The process examined is similar to KBR SUPERFLEX process. In this process, polymer grade ethylene and gasoline are generated as by-products. This report was developed based essentially on the following reference(s): Keywords: PG Propylene, Propene, ARCO, Kellogg Brown and Root
Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways:* Pathway 1: Ethylene Production from Ethane* Pathway 2: Ethylene Production from Ethane and Propane* Pathway 3: Green Ethylene Production from EthanolIn Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock.The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration
Download or read book Molecular Physical Chemistry for Engineers written by John T. Yates and published by University Science Books. This book was released on 2007-08-31 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a one-semester undergraduate course for engineers and materials scientists who need to understand physical chemistry, this book emphasises the behaviour of material from the molecular point of view.
Download or read book Ethylene Production via Cracking of Ethane Propane Cost Analysis Ethylene E21A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production starting from an ethane/propane mixture at a volume ratio of 4:1 A typical steam cracking process with front-end demethanization is employed. In this process, a mix of 80 vol% ethane and 20 vol% propane is thermally cracked in pyrolysis furnaces. In addition to polymer grade Ethylene, the process also generates polymer grade propylene and hydrogen-rich gas. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Ethane Cost Analysis Ethylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from ethane feedstock using a typical steam cracking process. In this process, ethane is thermally cracked in pyrolysis furnaces through the use of steam. Besides Ethylene, the process also generates a hydrogen-rich gas to be used as fuel. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Liquid liquid Equilibrium Data Collection Ternary systems written by Jens M. Sørensen and published by Dechema. This book was released on 1980 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Product Design Towards a Perspective through Case Studies written by Ka M. Ng and published by Elsevier. This book was released on 2006-10-24 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Product Design: Towards a Perspective through Case Studies provides a framework for chemical product design problems which are clearly defined together with different solution approaches. This book covers the latest methods and tools currently available in the field and discusses future challenges that the chemical industry is faced with. It focuses on important issues of chemical product design and provides a good overview on industrial chemical product design problems through case studies supplied by leading experts. The editors of Chemical Product Design teach chemical product design at graduate level courses and also serve as consultants for various chemical companies. They have also developed experimental techniques for chemical product design as well as computer-aided design methods and tools. - Highlights important issues of chemical product design through case studies - Case studies supplied by leading experts in chemical product design - Provides a complete framework for chemical product design
Download or read book Propylene Production from Propane Cost Analysis Propylene E32A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from propane using a dehydrogenation process. The process examined is similar to CB&I Lummus CATOFIN process. In this process, the dehydrogenation reaction is carried out in a fixed-bed reactor. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 20120014846, issued to Lummus Technology in 2012; (2) US Patent 8101541, issued to Sud-Chemie in 2012 Keywords: PG Propylene, Clariant, Sud-Chemie, Propene, PDH, On-Purpose Propylene Production
Download or read book Chemical and Catalytic Reaction Engineering written by James J. Carberry and published by Courier Corporation. This book was released on 2001-01-01 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to give chemical engineers background for managing chemical reactions, this text examines the behavior of chemical reactions and reactors; conservation equations for reactors; heterogeneous reactions; fluid-fluid and fluid-solid reaction systems; heterogeneous catalysis and catalytic kinetics; diffusion and heterogeneous catalysis; and analyses and design of heterogeneous reactors. 1976 edition.
Download or read book The Structure of the Chemical Processing Industries written by James Wei and published by McGraw-Hill Companies. This book was released on 1979 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elementary Chemical Engineering written by Max S. Peters and published by McGraw-Hill Companies. This book was released on 1984 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
