Download or read book Fresh Concrete written by P. Bartos and published by Elsevier. This book was released on 2013-10-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.
Download or read book The Properties of Fresh Concrete written by Treval C. Powers and published by John Wiley & Sons. This book was released on 1968 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials written by Nele De Belie and published by Springer. This book was released on 2017-12-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the current knowledge on the effect of SCMs (slag, fly ash, silica fume, limestone powder, metakaolin, natural pozzolans, rice husk ash, special SCMs, ternary blends) on the properties of fresh and hardened concrete (e.g. early strength development, workability, shrinkage) and curing requirements. Other topics treated in the book are postblending vs preblending, implications of SCM variability, interaction between SCM and commonly used admixtures (e.g. superplasticizers, air entrainers).
Download or read book Guidelines for Early opening to traffic Portland Cement Concrete for Pavement Rehabilitation written by Thomas John Van Dam and published by Transportation Research Board. This book was released on 2005 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Use of Recycled Plastics in Eco efficient Concrete written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2018-11-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of Recycled Plastics in Eco-efficient Concrete looks at the processing of plastic waste, including techniques for separation, the production of plastic aggregates, the production of concrete with recycled plastic as an aggregate or binder, the fresh properties of concrete with plastic aggregates, the shrinkage of concrete with plastic aggregates, the mechanical properties of concrete with plastic aggregates, toughness of concrete with plastic aggregates, modulus of elasticity of concrete with plastic aggregates, durability of concrete with plastic aggregates, concrete plastic waste powder with enhanced neutron radiation shielding, and more, thus making it a valuable reference for academics and industrial researchers. - Describes the main types of recycled plastics that can be applied in concrete manufacturing - Presents, for the first time, state-of-the art knowledge on the properties of conventional concrete with recycled plastics - Discusses the technological challenges for concrete manufactures for mass production of recycled concrete from plastic waste
Download or read book Properties of Fresh Concrete written by H.J. Wierig and published by CRC Press. This book was released on 2004-06-02 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new information on concrete properties and production in the light of the widespread use of ready mixed concrete and new concreting materials. This book forms the Proceedings of the RILEM Colloquium held in Hanover, West Germany in October 1990. Papers from 18 countries in Europe, North America and the Far East are included.
Download or read book Rheology of Fresh Cement and Concrete written by P.F.G. Banfill and published by CRC Press. This book was released on 1990-09-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together new research information on the flow behaviour of cementitious materials from the UK, France, Italy, Germany, Poland, Finland, USSR, USA and Japan, presented at the International Conference organised by the British Society of Rheology in March 1990.
Download or read book Properties of Concrete written by Adam M. Neville and published by New York : Wiley. This book was released on 1963 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Workability and Quality Control of Concrete written by G H Tattersall and published by CRC Press. This book was released on 2003-09-02 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete must be produced with the properties required for its intended applications, for example, it must be workable enough to flow into formwork, and to be compacted. This book deals with the measurement of the flow properties of fresh concrete and the factors which affect its workability. Aspects of concrete mixes and control of manufacture to produce optimum properties which relate to workability are covered.
Download or read book Cementitious Materials written by Herbert Pöllmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories
Download or read book The Rheology of Fresh Concrete written by G. H. Tattersall and published by Pitman Advanced Publishing Program. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Methods and Workability of Concrete written by P.J.M. Bartos and published by CRC Press. This book was released on 2004-06-02 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical production of ordinary and special, high performance concretes and their behaviour and properties when fresh are the main themes of this book. It derives from the International RILEM Conference held in Paisley, Scotland in June 1996, and represents the culmination of the work of two RILEM Technical Committees (145 WSM Workability of Special Mixes, and 150 ECM Efficiency of Concrete Mixers). Very significant advances have been made recently in the development of concrete with outstanding properties. Such advances in research must be matched by progress in the technology of concrete production. This book focuses on production methods and on workability and handling, two fundamental and closely linked stages of the concrete construction process. It has a strongly practical emphasis, with many contributions showing how to build effectively using the many high performance concretes which have progressed from research into construction in recent years. The main themes covered are: production mixers and mixing processes; production methods; sprayed and very dry precasting mixes; fibre reinforced concrete; flowing and superfluid mixes; rheology; test methods; mix design and models; special cements and concretes.
Download or read book Fly Ash in Concrete written by K. Wesche and published by CRC Press. This book was released on 2004-03-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state-of-the-art report which documents current knowledge on the properties of fly ash in concrete and the use of fly ash in construction. It includes RILEM Recommendations on fly ash in concrete and a comprehensive bibliography including over 800 references.
Download or read book Self Compacting Concrete Materials Properties and Applications written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2019-11-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Compacting Concrete: Materials, Properties and Applications presents the latest research on various aspects of self-compacting concrete, including test methods, rheology, strength and durability properties, SCC properties at elevated temperature, SC manufacturing with the use of SCMs, recycled aggregates and industrial by-products. Written by an international group of contributors who are closely associated with the development of self-compacting concrete, the book explores the main differences between SCC and normal concrete in terms of raw materials, fresh properties and hardened properties. Other topics discussed include the structure and practical applications of fiber reinforced SCC. Researchers and experienced engineers will find this reference to be a systematic source to SCC with its accounting of the latest breakthroughs in the field and discussions of SCC constructability, structural integrity, improved flows into complex forms, and superior strength and durability. - Offers a systematic and comprehensive source of information on the latest developments in SCC technology - Includes mix design procedures, tests standards, rheology, strength and durability properties - Explores the properties and practical applications of SCC
Download or read book Concrete Admixtures Handbook written by V.S. Ramachandran and published by William Andrew. This book was released on 1996-12-31 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition ten years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding ten chapters bring this book up to date; reflecting the relative advances made in the science and technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the first edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures.
Download or read book Admixtures for Concrete Improvement of Properties written by E. Vazques and published by CRC Press. This book was released on 2004-11-23 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical admixtures are used to modify the properties and behaviour of fresh and hardened concrete. They enable more economic construction and the achievement of special properties such as high strength or durability. This book presents new research information from an International RILEM Symposium on six main topics: workability, setting, strength, durability, other properties and technology.
Download or read book Advances in Civil Engineering and Infrastructural Development written by Laxmikant Madanmanohar Gupta and published by Springer Nature. This book was released on 2020-11-13 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the International Conference on Recent Advancements in Civil Engineering and Infrastructural Developments (ICRACEID 2019). The contents are broadly divided into five areas (i) smart transportation with urban planning, (ii) clean energy and environment, (iii) water distribution and waste management, (iv) smart materials and structures, and (v) disaster management. The book aims to provide solutions to global challenges using innovative and emerging technologies covering various fields of civil engineering. The major topics covered include urban planning, transportation, water distribution, waste management, disaster management, environmental pollution and control, environmental impact assessment, application of GIS and remote sensing, and structural analysis and design. Given the range of topics discussed, the book will be beneficial for students, researchers as well industry professionals.
