Download or read book Progress of Recycling in the Built Environment written by Enric Vázquez and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a useful tool for countries starting to recycle aggregates or construction and demolition waste. It contains the latest developments in this field, introduces a completely new approach to the procedure of proportioning concrete mixtures with recycled aggregate, references recent publications, opinions and discrepancies in relation to the durability of recycled concrete, such as freeze-thaw standards, studies of chloride penetration and diffusion, and sulfate attacks, the use of the fine fraction This volume will be of interest to recyclers, researchers and consumers.
Download or read book III Progress of Recycling in the Built Environment written by Isabel Martins and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.
Download or read book Designing for Zero Waste written by Steffen Lehmann and published by Routledge. This book was released on 2013-07-03 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing for Zero Waste is a timely, topical and necessary publication. Materials and resources are being depleted at an accelerating speed and rising consumption trends across the globe have placed material efficiency, waste reduction and recycling at the centre of many government policy agendas, giving them an unprecedented urgency. While there has been a considerable literature addressing consumption and waste reduction from different disciplinary perspectives, the complex nature of the problem requires an increasing degree of interdisciplinarity. Resource recovery and the optimisation of material flow can only be achieved alongside and through behaviour change to reduce the creation of material waste and wasteful consumption. This book aims to develop a more robust understanding of the links between lifestyle, consumption, technologies and urban development.
Download or read book The Proceedings of the IV International Conference Progress of Recycling in the Built Environment written by Isabel M. Martins and published by . This book was released on 2018 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2nd International RILEM Conference on Progress of Recycling in the Built Environment 2009 written by V. M. John and published by . This book was released on 2009 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing for Zero Waste written by Steffen Lehmann and published by Routledge. This book was released on 2013-07-03 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing for Zero Waste is a timely, topical and necessary publication. Materials and resources are being depleted at an accelerating speed and rising consumption trends across the globe have placed material efficiency, waste reduction and recycling at the centre of many government policy agendas, giving them an unprecedented urgency. While there has been a considerable literature addressing consumption and waste reduction from different disciplinary perspectives, the complex nature of the problem requires an increasing degree of interdisciplinarity. Resource recovery and the optimisation of material flow can only be achieved alongside and through behaviour change to reduce the creation of material waste and wasteful consumption. This book aims to develop a more robust understanding of the links between lifestyle, consumption, technologies and urban development.
Download or read book Building from Waste written by Dirk E. Hebel and published by Birkhäuser. This book was released on 2014-09-25 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: ”Reduce, Reuse, Recycle, and Recover“ is the sustainable guideline that has replaced the ”Take, Make, Waste“ attitude of the industrial age. Based on their background at the ETH Zurich and the Future Cities Laboratory in Singapore, the authors provide both a conceptual and practical look into materials and products which use waste as a renewable resource. This book introduces an inventory of current projects and building elements, ranging from marketed products, among them façade panels made of straw and self-healing concrete, to advanced research and development like newspaper, wood or jeans denim used as isolating fibres. Going beyond the mere recycling aspect of reused materials, it looks into innovative concepts of how materials usually regarded as waste can be processed into new construction elements. The products are organized along the manufacturing processes: densified, reconfigured, transformed, designed and cultivated materials. A product directory presents all materials and projects in this book according to their functional uses in construction: load-bearing, self-supporting, insulating, waterproofing and finishing products.
Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by Vítor M.C.F. Cunha and published by Springer Nature. This book was released on 2021-07-13 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Shift to a circular economy”, which is focussed on sustainability and covers the research and recent technologies on the use and development of sustainable materials and structural systems, as well as on recycling and reusing. It also covers the implementation of industrial processes leading to minimized waste, including digital fabrication and deconstruction, as well as integrative approaches that lead to the achievement of the concept of circular economy. Additionally, this topic covers research on novel or existing construction materials and systems based on local resources and regional practices. The following subtopics are included: industrialized construction systems minimizing waste; recycling and reuse of materials and components; 4Ls: local constructions with local materials through local approaches for local development; Digital Manufacturing; design for deconstruction; smart demolition techniques; timber structures; Life-Cycle Assessment of construction materials and technologies; recycling of pavements and materials in roads.
Download or read book The Architecture of Waste written by Caroline O'Donnell and published by Routledge. This book was released on 2020-11-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global material crises are imminent. In the very near future, recycling will no longer be a choice made by those concerned about the environment, but a necessity for all. This means a paradigm shift in domestic behavior, manufacturing, construction, and design is inevitable. The Architecture of Waste provides a hopeful outlook through examining current recycling practices, rethinking initial manufacturing techniques, and proposing design solutions for second lives of material-objects. The book touches on a variety of inescapable issues beyond our global waste crisis including cultural psyches, politics, economics, manufacturing, marketing, and material science. A series of crucial perspectives from experts cover these topics and frames the research by providing a past, present, and future look at how we got here and where we go next: the historical, the material, and the design. Twelve design proposals look beyond the simple application of recycled and waste materials in architecture—an admirable endeavor but one that does not engage the urgent reality of a circular economy—by aiming to transform familiar, yet flawed, material-objects into closed-loop resources. Complete with over 150 color images and written for both professionals and students, The Architecture of Waste is a necessary reference for rethinking the traditional role of the architect and challenging the discipline to address urgent material issues within the larger design process.
Download or read book Construction Demolition and Disaster Waste Management written by Erik K. Lauritzen and published by CRC Press. This book was released on 2018-09-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction and Demolition Waste (CDW), from the construction, maintenance, renovation and demolition of buildings and structures, represents a large proportion of the waste in industrialized societies. Compared to other forms, such as household waste, more than 90% of CDW can be used as a resource and a substitute for construction materials, especially for primary, natural raw materials. Reuse, recovery and recycling depends on the quality and market for the materials, and the environmental impact of the processes for conversion of CDW from old structures to its use in new structures. However, the utilization today of CDW products as secondary resources is marginal. Most CDW is deposited or used as fill material, and the opportunities of high quality recycling are generally neglected. This book presents the opportunities for the sustainable and resource efficient utilisation of CDW, focusing on recycling of concrete and masonry as the major forms of CDW. The recycling of gypsum, timber, mineral wool, asphalt and other types are also described. Its aim is to present a chain of value and material streams in the transformation of obsolete buildings and structures into new buildings and structures. It takes a holistic view, focusing on the lifecycle economy (the circular economy) and integrated management aspects of various scenarios ranging from high industrial urban renewal to debris removal and management after disasters and conflicts. It is based on the author ́s 35 years of research and development combined with practical international experience within the demolition and recycling area. It addresses students, architects, civil engineers, building owners, public authorities and others working in urban planning, demolition and resource management in the building and construction sector and in the reconstruction of damaged buildings after disasters and wars.
Download or read book Research Anthology on Environmental and Societal Well Being Considerations in Buildings and Architecture written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-05-28 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it comes to architecture, there has been a focus on sustainable buildings and human well-being in the built environment. Buildings should not only be environmentally friendly and sustainable, but dually focused on human health, wellness, and experience. This includes considerations into the quality of buildings, ranging from ventilation to thermal comfort, along with environment considerations such as energy usage and material selection. Specific architectural choices and design for buildings can either contribute to or negatively impact both society and the environment, leading research in the field of architecture to be focused on environmental and societal well-being in accordance with the built environment. The Research Anthology on Environmental and Societal Well-Being Considerations in Buildings and Architecture focuses on how the built environment is being constructed to purposefully enhance societal well-being while also maintaining green standards for environmental sustainability. On one side, this book focuses on the specific building choices that can be made for the purpose of human well-being and the occupants who will utilize the building. On the other side, this book also focuses on environmental sustainability from the standpoint of green buildings and environmental concerns. Together, these topics allow this book to have a holistic view of modern architectural choices and design. This book is essential for architects, IT professionals, engineers, contractors, environmentalists, interior designers, civil planners, regional government officials, construction companies, policymakers, practitioners, researchers, academicians, and students interested in architecture and how it can promote environmental and societal well-being.
Download or read book Recycling and the Built Environment written by Barton John Williams and published by . This book was released on 1994 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Matters written by Nikole Bouchard and published by Routledge. This book was released on 2020-12-01 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: For thousands of years humans have experimented with various methods of waste disposal—from burning and burying to simply packing up and moving in search of an unscathed environment. Habits of disposal are deeply ingrained in our daily lives, so casual and continual that we rarely ever stop to ponder the big-picture effects on social, spatial and ecological orders. Rethinking the ways in which we produce, collect, discard and reuse our waste, whether it’s materials, spaces or places, is essential to ensure a more feasible future. Waste Matters: Adaptive Reuse for Productive Landscapes presents a series of historical and contemporary design ideas that reimagine a range of repurposed materials at diverse scales and in various contexts by exploring methods of hacking, disassembly, reassembly, recycling, adaptive reuse and preservation of the built environment. Waste Matters will inspire designers to sample and rearrange bits of artifacts from the past and present to produce culturally relevant and ecologically sensitive materials, objects, architecture and environments.
Download or read book Strategies for Circular Economy and Cross sectoral Exchanges for Sustainable Building Products written by Marco Migliore and published by Springer Nature. This book was released on 2019-09-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable tool for understanding current efforts to promote the reuse and enhancement of pre-consumer waste in the development of new products for the construction sector, as well as the financial and regulatory tools being used to support this trend. It explores the vast and complex topic of the circular economy from the perspective of strategies for the reuse/recycling of waste, and develops a number of key premises: waste reuse/recycling must be considered using a logic of cross-sectoriality, recognizing the need to enhance the “dialogue” between different sectors; pre-consumer waste is particularly interesting for the recycling market because the construction sector can reduce its environmental impacts by enhancing its capacity to use secondary raw materials and by-products from other sectors; and lastly, the manufacturing sector is currently experimenting with promising forms of reducing/recycling pre-consumer waste and is at the same time providing by-products that can be used in other production chains. As such, the book offers a valuable asset for professionals who are interested in sustainability in construction, and in the study of construction products; however, it will be equally useful for local decision-makers tasked with implementing development policies and innovations in the industrial sector.
Download or read book City of Layers written by Mark Urizar and published by Xlibris Corporation. This book was released on 2012-04-20 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Society seems to be tied irrevocably to long-term patterns of resource use, and to producing unassimilatable waste, emissions, and ongoing environmental degradation. There also are seemingly irresolvable dilemmas between humanity and nature, society and ecology, and utility and beauty, where each decision we make seems to cause some harm. To change from our present path and resolve these, we must have the courage to break from traditions and use our knowhow to progressively and creatively enhance the existing built form so a new built reality emerges, one that enriches people and possibly enables a sustainable future. This alternate path necessitates a holistic approach, one that can more effectively merge and better utilise the disciplines of architecture, engineering, art, sciences and business to integrate the many different parts within the built environment, and produce a vibrant, viable new whole. With this approach, we could begin to transform the built environment into an entity that virtually replicates and functions as a natural sustainable system. Every decision we make is important. What practices, processes, technologies are applied, to how built elements are designed, placed, structured, configured and interfaced, are all important. These determine what eventuates; the built form, architecture, and the ultimate ‘appropriateness’ of the resulting outcome. By determining what is ‘appropriate’, this book provides a retrospective view of the semi-static present built environment with its many in-place processes, issues, constraints, and opportunities, and postulates what is required by visualising the possible alternatives for the always growing built environment. These provide a useful insight into how the built form and urban life can be enhanced, and thereby also how humanity can use architecture to live in a more equitable balance, possibly in harmony and sustainably with nature.
Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste
