Download or read book Progress in Ceramic Science written by J. E. Burke and published by Elsevier. This book was released on 2016-07-04 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Ceramic Science, Volume 4 is a collection of papers reviewing the electrical and magnetic properties of ceramics, the fabrication techniques, and the effects of radiation on glasses. The book discusses the radiation effects in quartz, silica, and glasses focusing on the following: 1) the basic Si-O network; 2) impurities substitutional for silicon; and 3) alkali and hydrogen as the prime sources for ""non-bridging oxygen"". The text then explains the process of pressure sintering of ceramics to achieve pressure bonding, microstructural control, composite fabrication, and enhanced densification. One paper also discusses the theory on the relationship between the magnetic properties of non-metallic transition metal oxides and crystal chemistry. The book evaluates the non-stoichiometric or flux, melt techniques that are used in growing high quality single crystals found in electronic devices. This topic includes the benefits of the techniques and an outline of the principles of flux growth. The electrical conduction mechanisms in oxides are then addressed, emphasizing the chemical approach through equations that are commonly found in chemistry. The book therefore addresses ionic conduction and mixed electrolytic and electronic conductors, and then reviews the fundamental equation that applies to all conduction processes. The book can prove valuable for chemists, glass-ceramics materials engineers, ceramics technologists, and researchers in allied physics subjects.
Download or read book Progress in Ceramic Science written by J. E. Burke and published by Elsevier. This book was released on 2016-06-07 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Ceramic Science
Download or read book Progress in Ceramic Science written by J. E. Burke and published by Elsevier. This book was released on 2013-09-03 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Ceramic Science
Download or read book Progress in Ceramic Science written by J. E. Burke and published by . This book was released on 1966-01-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Ceramic Science written by and published by . This book was released on 1963 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Ceramic Science written by J. E. Burke and published by . This book was released on 1962 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. Provides detailed coverage of parts and processing, properties and applications Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs
Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.
Download or read book Progress in Ceramic Science written by J. E. Burke and published by Elsevier. This book was released on 2013-09-03 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Ceramic Science
Download or read book Advanced Ceramics for Energy Conversion and Storage written by Olivier Guillon and published by Elsevier. This book was released on 2019-11-20 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to enable an affordable, sustainable, fossil-free future energy supply, research activities on relevant materials and related technologies have been intensified in recent years, Advanced Ceramics for Energy Conversion and Storage describes the current state-of-the-art concerning materials, properties, processes, and specific applications. Academic and industrial researchers, materials scientists, and engineers will be able to get a broad overview of the use of ceramics in energy applications, while at the same time become acquainted with the most recent developments in the field. With chapters written by recognized experts working in their respective fields the book is a valuable reference source covering the following application areas: ceramic materials and coatings for gas turbines; heat storage and exchange materials for solar thermal energy; ceramics for nuclear energy; ceramics for energy harvesting (thermoelectrics, piezoelectrics, and sunlight conversion); ceramic gas separation membranes; solid oxide fuel cells and electrolysers; and electrochemical storage in battery cells. Advanced Ceramics for Energy Conversion and Storage offers a sound base for understanding the complex requirements related to the technological fields and the ceramic materials that make them possible. The book is also suitable for people with a solid base in materials science and engineering that want to specialize in ceramics. Presents an extensive overview of ceramic materials involved in energy conversion and storage Updates on the tremendous progress that has been achieved in recent years Showcases authors at the forefront of their fields, including results from the huge amount of published data Provides a list of requirements for the materials used for each energy technology Includes an evaluation and comparison of materials available, including their structure, properties and performance
Download or read book An Introduction to Ceramic Science written by D. W. Budworth and published by Elsevier. This book was released on 2016-01-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Ceramic Science covers the principles of ceramic science, the physicochemical system, and atomic mechanisms of ceramics. This book is organized into eight chapters and begins with a study of atoms and the way in which they bond together to form crystalline solids. This topic is followed by a geometrical description of the structures of some crystals of particular importance in ceramics and some of the features of the elementary classical theory of ionic crystals. The following chapter presents the principles of the thermodynamic and phase diagram approaches to study phase equilibrium in ceramics. A chapter is devoted to the microstructure and porosity of ceramics. The discussion then shifts to several atomic movements in dense ceramics, such as diffusion, nucleation, and grain growth. The concluding chapters examine the mechanical properties and densification processes in ceramics. This book is of great value to ceramists, scientists, researchers, and undergraduate students who are interested in improving ceramic materials for particular applications.
Download or read book Advances in Ceramic Materials written by Ping Xiao and published by Trans Tech Publications Ltd. This book was released on 2008-10-21 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This topical book, containing as it does state-of-the-art reviews, neatly encompasses the current status of research into ceramic materials.
Download or read book Science of Ceramic Interfaces II written by J. Nowotny and published by Newnes. This book was released on 1995-01-13 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers arose from the Proceedings of the International Workshop on Interfaces of Ceramic Materials held in Australia, 1993 and is a continuation of the previous book published under the same title. The objective of the Workshop was to discuss research progress on the chemistry of ceramic interfaces and related industrial aspects. Due to the multidisciplinary character of ceramic interfaces the book contains articles covering several areas of expertise, including ceramics, surface science, solid state electrochemistry, metallurgy and high temperature chemistry. Some technical papers are also included in this volume. Scientists and engineers working in these areas, as well as students in materials science and engineering, will find this book of particular significance.
Download or read book Symposium Progress in Ceramic Science and Technology written by and published by . This book was released on 1984 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Bioceramics written by ACerS (American Ceramics Society, The) and published by Wiley-Blackwell. This book was released on 2004-03-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioceramics are ceramic materials primarily used for the repair, reconstruction and replacement of diseased or damaged parts of the musculo-skeletal system. The use of these materials has led to remarkable advances in the quality of life for millions of people. In the future, bioceramics will continue to be improved upon and new materials and applications will be discovered.
Download or read book Progress in Nanotechnology written by ACerS (American Ceramics Society, The) and published by John Wiley & Sons. This book was released on 2010-01-14 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of Progress in Ceramic Technology series contains a select compilation of articles on the topic of nanomaterials processing of powders; thin films, wires and tubes; and composites that were previously published in The American Ceramic Society Bulletin, Journal of the American Ceramic Society, International Journal of Applied Ceramic Technology, Ceramic Engineering and Science Proceedings (CESP) and Ceramic Transactions (CT).
Download or read book Progress in Ceramic Armor written by ACerS (American Ceramics Society, The) and published by Wiley-American Ceramic Society. This book was released on 2004-03-28 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of recent papers on ceramic armor that have been published in ACerS Ceramic Engineering and Science Proceedings (CESP) and Ceramic Transactions (CT) volumes. This collection of papers on current research and development will serve as a solid reference resource for those involved in this field.