Download or read book Prognostics and Health Management of Electronics by Utilizing Environmental and Usage Loads written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2008-09-11 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on Prognostics and Health Management of Electronics Recently, the field of prognostics for electronic products has received increased attention due to the potential to provide early warning of system failures, forecast maintenance as needed, and reduce life cycle costs. In response to the subject's growing interest among industry, government, and academic professionals, this book provides a road map to the current challenges and opportunities for research and development in Prognostics and Health Management (PHM). The book begins with a review of PHM and the techniques being developed to enable a prognostics approach for electronic products and systems. building on this foundation, the book then presents the state of the art in sensor systems for in-situ health and usage monitoring. Next, it discusses the various models and algorithms that can be utilized in PHM. Finally, it concludes with a discussion of the opportunities in future research. Readers can use the information in this book to: Detect and isolate faults Reduce the occurrence of No Fault Found (NFF) Provide advanced warning of system failures Enable condition-based (predictive) maintenance Obtain knowledge of load history for future design, qualification, and root cause analysis Increase system availability through an extension of maintenance cycles and/or timely repair actions Subtract life cycle costs of equipment from reduction in inspection costs, down time, and inventory Prognostics and Health Management of Electronics is an indispensable reference for electrical engineers in manufacturing, systems maintenance, and management, as well as design engineers in all areas of electronics.

Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2018-08-15 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable guide for engineers and data scientists in design, testing, operation, manufacturing, and maintenance A road map to the current challenges and available opportunities for the research and development of Prognostics and Health Management (PHM), this important work covers all areas of electronics and explains how to: assess methods for damage estimation of components and systems due to field loading conditions assess the cost and benefits of prognostic implementations develop novel methods for in situ monitoring of products and systems in actual life-cycle conditions enable condition-based (predictive) maintenance increase system availability through an extension of maintenance cycles and/or timely repair actions; obtain knowledge of load history for future design, qualification, and root cause analysis reduce the occurrence of no fault found (NFF) subtract life-cycle costs of equipment from reduction in inspection costs, downtime, and inventory Prognostics and Health Management of Electronics also explains how to understand statistical techniques and machine learning methods used for diagnostics and prognostics. Using this valuable resource, electrical engineers, data scientists, and design engineers will be able to fully grasp the synergy between IoT, machine learning, and risk assessment.

Download or read book Prognostics and Health Management written by Douglas Goodman and published by John Wiley & Sons. This book was released on 2019-04-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the application and processing of condition-based data to produce prognostic estimates of functional health and life. Prognostics and Health Management provides an authoritative guide for an understanding of the rationale and methodologies of a practical approach for improving system reliability using conditioned-based data (CBD) to the monitoring and management of health of systems. This proven approach uses electronic signatures extracted from conditioned-based electrical signals, including those representing physical components, and employs processing methods that include data fusion and transformation, domain transformation, and normalization, canonicalization and signal-level translation to support the determination of predictive diagnostics and prognostics. Written by noted experts in the field, Prognostics and Health Management clearly describes how to extract signatures from conditioned-based data using conditioning methods such as data fusion and transformation, domain transformation, data type transformation and indirect and differential comparison. This important resource: Integrates data collecting, mathematical modelling and reliability prediction in one volume Contains numerical examples and problems with solutions that help with an understanding of the algorithmic elements and processes Presents information from a panel of experts on the topic Follows prognostics based on statistical modelling, reliability modelling and usage modelling methods Written for system engineers working in critical process industries and automotive and aerospace designers, Prognostics and Health Management offers a guide to the application of condition-based data to produce signatures for input to predictive algorithms to produce prognostic estimates of functional health and life.

Download or read book Prognostics and Health Management of Electronics written by Michael Pecht and published by Wiley-IEEE Press. This book was released on 2018-08-24 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable guide for engineers and data scientists in design, testing, operation, manufacturing, and maintenance A road map to the current challenges and available opportunities for the research and development of Prognostics and Health Management (PHM), this important work covers all areas of electronics and explains how to: assess methods for damage estimation of components and systems due to field loading conditions assess the cost and benefits of prognostic implementations develop novel methods for in situ monitoring of products and systems in actual life-cycle conditions enable condition-based (predictive) maintenance increase system availability through an extension of maintenance cycles and/or timely repair actions; obtain knowledge of load history for future design, qualification, and root cause analysis reduce the occurrence of no fault found (NFF) subtract life-cycle costs of equipment from reduction in inspection costs, downtime, and inventory Prognostics and Health Management of Electronics also explains how to understand statistical techniques and machine learning methods used for diagnostics and prognostics. Using this valuable resource, electrical engineers, data scientists, and design engineers will be able to fully grasp the synergy between IoT, machine learning, and risk assessment.

Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.

Download or read book Reliability Engineering written by Kailash C. Kapur and published by John Wiley & Sons. This book was released on 2014-04-28 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Integrated Approach to Product Development Reliability Engineering presents an integrated approach to the design, engineering, and management of reliability activities throughout the life cycle of a product, including concept, research and development, design, manufacturing, assembly, sales, and service. Containing illustrative guides that include worked problems, numerical examples, homework problems, a solutions manual, and class-tested materials, it demonstrates to product development and manufacturing professionals how to distribute key reliability practices throughout an organization. The authors explain how to integrate reliability methods and techniques in the Six Sigma process and Design for Six Sigma (DFSS). They also discuss relationships between warranty and reliability, as well as legal and liability issues. Other topics covered include: Reliability engineering in the 21st Century Probability life distributions for reliability analysis Process control and process capability Failure modes, mechanisms, and effects analysis Health monitoring and prognostics Reliability tests and reliability estimation Reliability Engineering provides a comprehensive list of references on the topics covered in each chapter. It is an invaluable resource for those interested in gaining fundamental knowledge of the practical aspects of reliability in design, manufacturing, and testing. In addition, it is useful for implementation and management of reliability programs.

Download or read book Prognostics and Health Management of Engineering Systems written by Nam-Ho Kim and published by Springer. This book was released on 2016-10-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the methods for predicting the future behavior of a system’s health and the remaining useful life to determine an appropriate maintenance schedule. The authors introduce the history, industrial applications, algorithms, and benefits and challenges of PHM (Prognostics and Health Management) to help readers understand this highly interdisciplinary engineering approach that incorporates sensing technologies, physics of failure, machine learning, modern statistics, and reliability engineering. It is ideal for beginners because it introduces various prognostics algorithms and explains their attributes, pros and cons in terms of model definition, model parameter estimation, and ability to handle noise and bias in data, allowing readers to select the appropriate methods for their fields of application.Among the many topics discussed in-depth are:• Prognostics tutorials using least-squares• Bayesian inference and parameter estimation• Physics-based prognostics algorithms including nonlinear least squares, Bayesian method, and particle filter• Data-driven prognostics algorithms including Gaussian process regression and neural network• Comparison of different prognostics algorithms divThe authors also present several applications of prognostics in practical engineering systems, including wear in a revolute joint, fatigue crack growth in a panel, prognostics using accelerated life test data, fatigue damage in bearings, and more. Prognostics tutorials with a Matlab code using simple examples are provided, along with a companion website that presents Matlab programs for different algorithms as well as measurement data. Each chapter contains a comprehensive set of exercise problems, some of which require Matlab programs, making this an ideal book for graduate students in mechanical, civil, aerospace, electrical, and industrial engineering and engineering mechanics, as well as researchers and maintenance engineers in the above fields.

Download or read book Risk Based Engineering written by Prabhakar V. Varde and published by Springer. This book was released on 2018-04-19 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprehensively covers the various aspects of risk modeling and analysis in technological contexts. It pursues a systems approach to modeling risk and reliability concerns in engineering, and covers the key concepts of risk analysis and mathematical tools used to assess and account for risk in engineering problems. The relevance of incorporating risk-based structures in design and operations is also stressed, with special emphasis on the human factor and behavioral risks. The book uses the nuclear plant, an extremely complex and high-precision engineering environment, as an example to develop the concepts discussed. The core mechanical, electronic and physical aspects of such a complex system offer an excellent platform for analyzing and creating risk-based models. The book also provides real-time case studies in a separate section to demonstrate the use of this approach. There are many limitations when it comes to applications of risk-based approaches to engineering problems. The book is structured and written in a way that addresses these key gap areas to help optimize the overall methodology. This book serves as a textbook for graduate and advanced undergraduate courses on risk and reliability in engineering. It can also be used outside the classroom for professional development courses aimed at practicing engineers or as an introduction to risk-based engineering for professionals, researchers, and students interested in the field.

Download or read book Engineering Asset Management and Infrastructure Sustainability written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2012-05-11 with total page 1131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Asset Management 2010 represents state-of-the art trends and developments in the emerging field of engineering asset management as presented at the Fifth World Congress on Engineering Asset Management (WCEAM). The proceedings of the WCEAM 2010 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance Asset data warehousing, data mining and fusion Asset performance and level-of-service models Design and life-cycle integrity of physical assets Education and training in asset management Engineering standards in asset management Fault diagnosis and prognostics Financial analysis methods for physical assets Human dimensions in integrated asset management Information quality management Information systems and knowledge management Intelligent sensors and devices Maintenance strategies in asset management Optimisation decisions in asset management Risk management in asset management Strategic asset management Sustainability in asset management

Download or read book Solid State Lighting Reliability written by W.D. van Driel and published by Springer Science & Business Media. This book was released on 2012-09-06 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Lighting Reliability: Components to Systems begins with an explanation of the major benefits of solid state lighting (SSL) when compared to conventional lighting systems including but not limited to long useful lifetimes of 50,000 (or more) hours and high efficacy. When designing effective devices that take advantage of SSL capabilities the reliability of internal components (optics, drive electronics, controls, thermal design) take on critical importance. As such a detailed discussion of reliability from performance at the device level to sub components is included as well as the integrated systems of SSL modules, lamps and luminaires including various failure modes, reliability testing and reliability performance. A follow-up, Solid State Lighting Reliability Part 2, was published in 2017.

Download or read book International Journal of Prognostics and Health Management Volume 3 color written by PHM Society and published by Lulu.com. This book was released on 2013-09-24 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request.

Download or read book Reliability Characterisation of Electrical and Electronic Systems written by and published by Elsevier. This book was released on 2014-12-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a holistic approach to reliability engineering for electrical and electronic systems by looking at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability for a range of devices. The text describes the reliability behavior of electrical and electronic systems. It takes an empirical scientific approach to reliability engineering to facilitate a greater understanding of operating conditions, failure mechanisms and the need for testing for a more realistic characterisation. After introducing the fundamentals and background to reliability theory, the text moves on to describe the methods of reliability analysis and charactersation across a wide range of applications. Takes a holistic approach to reliability engineering Looks at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability Facilitates a greater understanding of operating conditions, failure mechanisms and the need for testing for a more realistic characterisation

Download or read book Integrated Vehicle Health Management written by Ian K Jennions and published by SAE International. This book was released on 2013-09-25 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Vehicle Health Management (IVHM) is a relatively new subject, with its roots back in the space sector of the early 1990s. Although many of the papers written around that time did not refer to it as IVHM, the fundamental principles of considering an integrated end-to-end system to monitor the overall health of the asset were clearly visible. As the subject of Integrated Vehicle Health Management (IVHM) and its associated technologies have grown up, businesses are making the transformation from selling a product to selling a service. This can be viewed as a positive disruption, as a relatively small technology breakthrough is being brought to market for a large business benefit. The sequence “sense—acquire—transfer—analyze—act “ feeds the information (processed data) on the asset’s health into the Operations or Management control center. Here, decisions can be made on maintenance actions with knowledge of the supply chain status, MRO loading, etc., provided by Maintenance and Logistics systems. Undoubtedly, a much more efficient and economical modus operandi. This book brings together a collection of twenty –two SAE International Technical papers on this very theme, organized according to specific areas of interest: • Engines • Airframes • Electrical Power Systems • Supporting Systems • Architecture They were selected by Dr. Ian K. Jennions, Director of IVHM Center at Cranfield University, in the UK. Dr. Jennions was also the editor of three other books on Integrated Vehicle Health Management, published by SAE International: • IVHM: Perspectives on an Emerging Field • IVHM: Business Case Theory and Practice • IVHM: The Technology

Download or read book Applied Reliability Engineering and Risk Analysis written by Ilia B. Frenkel and published by John Wiley & Sons. This book was released on 2013-08-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete resource on the theory and applications of reliability engineering, probabilistic models and risk analysis consolidates all the latest research, presenting the most up-to-date developments in this field. With comprehensive coverage of the theoretical and practical issues of both classic and modern topics, it also provides a unique commemoration to the centennial of the birth of Boris Gnedenko, one of the most prominent reliability scientists of the twentieth century. Key features include: expert treatment of probabilistic models and statistical inference from leading scientists, researchers and practitioners in their respective reliability fields detailed coverage of multi-state system reliability, maintenance models, statistical inference in reliability, systemability, physics of failures and reliability demonstration many examples and engineering case studies to illustrate the theoretical results and their practical applications in industry Applied Reliability Engineering and Risk Analysis is one of the first works to treat the important areas of degradation analysis, multi-state system reliability, networks and large-scale systems in one comprehensive volume. It is an essential reference for engineers and scientists involved in reliability analysis, applied probability and statistics, reliability engineering and maintenance, logistics, and quality control. It is also a useful resource for graduate students specialising in reliability analysis and applied probability and statistics. Dedicated to the Centennial of the birth of Boris Gnedenko, renowned Russian mathematician and reliability theorist

Download or read book Applications in Electronics Pervading Industry Environment and Society written by Sergio Saponara and published by Springer. This book was released on 2019-05-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. It covers a broad spectrum of application domains, from automotive to space and from health to security, while devoting special attention to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2018 ApplePies Conference, held in Pisa, Italy in September 2018, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas addressed by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean and efficient energy; the environment; and smart, green and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and the development of systems that facilitate human activities. This book, written by industrial and academic professionals, represents a valuable contribution in this endeavor.

Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 3668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.