Download or read book Production Control and Information Systems for Component manufacturing Shops written by J. W. M. Bertrand and published by Elsevier Science & Technology. This book was released on 1981 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book Production control and information systems for component manufacturing shops written by Jan Willem Marie Bertrand and published by . This book was released on 1981 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Control written by J. W. M. Bertrand and published by North-Holland. This book was released on 1990 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 15 years the authors have been engaged in projects with many firms to analyse and redesign production and inventory control systems. The main purpose of this analysis and redesign was the reduction of inventory and costs, improvement of delivery performance, and simplification of the organization involved in production and inventory control. During these studies the authors became convinced that the knowledge available on the design of control systems places too much emphasis on techniques and methods, whereas the main concern should be to establish a proper control structure. This control structure should identify the main decision functions, their goals, their relationships, and the organizational position to which these decision functions should be assigned. For each decision function in the control structure, a global planning and decision procedure should be established. This book gives a comprehensive overview on the elements of a good production control structure. It examines approaches for possible structures, and how to select an adequate structure for a particular production situation. The book consists of two parts: The first part covers basic terms and ideas regarding the design of production and inventory control systems in general. The second part examines four case studies from essentially different production areas. The volume is intended for postgraduate students in such fields as production and inventory control, logistics, information systems and practitioners who are working in this field on a high organisation level.

Download or read book Handbook of Manufacturing Control written by Hermann Lödding and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unternehmen mit kurzen Lieferzeiten, hoher Liefertreue und niedrigen Beständen wachsen schnell und erzielen hohe Gewinne. Wie Unternehmen diese logistische Herausforderung meistern können, zeigt das Buch anhand von aktuellen Forschungsergebnissen der Leibniz Universität Hannover. Der Band gibt einen umfassenden Überblick über die Aufgaben und Verfahren der Fertigungssteuerung und befähigt Leser dazu, Schwächen in diesem Bereich zu erkennen und zu korrigieren. Ein fundiertes Nachschlagewerk für Studierende, Dozenten, Ingenieure und Wissenschaftler.

Download or read book Computer Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Download or read book Engineering Production Control Strategies written by Christoph Karrer and published by Springer Science & Business Media. This book was released on 2012-02-25 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identifying and customizing suitable control strategies is a challenging task, especially when production systems have to cope with variable demands, forecast error, and unstable processes. The focus of this book lies on helping companies with complex and discrete production systems to tailor a production control strategy to their needs. Thereby, the mutual merits of “push” and “pull” systems are taken into account, leading to hybrid strategies. Consequently, the book addresses practitioners who are interested in looking behind the scenes and into the physics of production control. A real-life case study demonstrates the practical applicability of the presented framework.

Download or read book Capacity Oriented Analysis and Design of Production Systems written by M.B.M. de Koster and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: In production systems there are often capacity oriented performance objectives, like a desired total throughput, a desired average throughput time and average work in-process. Such performance objectives are expressed in "units of products" rather than in specific product types. This book presents a way of modeling and analyzing production systems so, that such capacity oriented performance criteria can be measured in a simple way. The model consists of three basic elements. 1. The product types in the system are aggregated. 2. The product flow is modeled as being continuous. 3. The machines in the model have a finite number of states. Each state has a phase-type sojourn distribution and an associated production speed. Transitions between the states are determined by an irreducible Markov transition matrix. In the book both the mathematical properties and the practical applicabilities of the model are investigated. The model is extensively analyzed for various layouts, like flow lines, assembly disassembly systems and networks where parallel machines share common buffers. Furthermore various ways of controlling the product flow in the model are investigated, such as Base Stock Control, Workload Control, control by finite buffers and control by the Reorder Point System. An approximation technique is developed for a quick estimation of performance measures like throughput and average work-in-process, for networks with layouts and control techniques like those above-mentioned.

Download or read book Shop Floor Control Systems written by A. Bauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been a tremendous upsurge of interest in manufac turing systems design and analysis. Large industrial companies have realized that their manufacturing facilities can be a source of tremendous opportunity if managed well or a huge corporate liability if managed poorly. In particular industrial managers have realized the potential of well designed and installed production planning and control systems. Manufacturing, in an environment of short product life cycles and increasing product diversity, looks to tech niques such as manufacturing resource planning, Just In Time (lIT) and total quality control among others to meet the challenge. Customers are demanding high quality products and very fast turn around on orders. Manufacturing personnel are aware of the lead time from receipt of order to delivery of completed orders at the customer's premises. It is clear that this production lead time is, for the majority of manufacturing firms, greatly in excess of the actual processing or manufacturing time. There are many reasons for this, among them poor coordination between the sales and manufacturing function. Some are within the control of the manufacturing function. Others are not.

Download or read book Production Planning with Capacitated Resources and Congestion written by Hubert Missbauer and published by Springer Nature. This book was released on 2020-02-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.

Download or read book Lean Business Systems and Beyond written by Tomasz Koch and published by Springer Science & Business Media. This book was released on 2008-01-28 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Manufacturing has proved to be one of the most successful and most powerful production business systems over the last decades. Its application enabled many companies to make a big leap towards better utilization of resources and thus provide better service to the customers through faster response, higher quality and lowered costs. Lean is often described as “eyes for flow and eyes for muda” philosophy. It simply means that value is created only when all the resources flow through the system. If the flow is stopped no value but only costs and time are added, which is muda (Jap. waste). Since the philosophy was born at the Toyota many solutions were tailored for the high volume environment. But in turbulent, fast-changing market environment and progressing globalization, customers tend to require more customization, lower volumes and higher variety at much less cost and of better quality. This calls for adaptation of existing lean techniques and exploration of the new waste-free solutions that go far beyond manufacturing. This book brings together the opinions of a number of leading academics and researchers from around the world responding to those emerging needs. They tried to find answer to the question how to move forward from “Spaghetti World” of supply, production, distribution, sales, administration, product development, logistics, accounting, etc. Through individual chapters in this book authors present their views, approaches, concepts and developed tools. The reader will learn the key issues currently being addressed in production management research and practice throughout the world.

Download or read book Production Planning and Control written by Hemant Sharma and published by BookRix. This book was released on 2019-06-04 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study.

Download or read book New Trends in Software Methodologies Tools and Techniques written by A. Selamat and published by IOS Press. This book was released on 2014-08-29 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software is the essential enabling means for science and the new economy. It helps us to create a more reliable, flexible and robust society. But software often falls short of our expectations. Current methodologies, tools, and techniques remain expensive and are not yet sufficiently reliable, while many promising approaches have proved to be no more than case-by-case oriented methods. This book contains extensively reviewed papers from the thirteenth International Conference on New Trends in software Methodology, Tools and Techniques (SoMeT_14), held in Langkawi, Malaysia, in September 2014. The conference provides an opportunity for scholars from the international research community to discuss and share research experiences of new software methodologies and techniques, and the contributions presented here address issues ranging from research practices and techniques and methodologies to proposing and reporting solutions for global world business. The emphasis has been on human-centric software methodologies, end-user development techniques and emotional reasoning, for an optimally harmonized performance between the design tool and the user. Topics covered include the handling of cognitive issues in software development to adapt it to the user's mental state and intelligent software design in software utilizing new aspects on conceptual ontology and semantics reflected on knowledge base system models. This book provides an opportunity for the software science community to show where we are today and where the future may take us.

Download or read book Research Methods for Operations and Supply Chain Management written by Christer Karlsson and published by Taylor & Francis. This book was released on 2023-11-15 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods for Operations and Supply Chain Management, third edition, is a toolkit of research approaches primarily for advanced students and beginner researchers, but also a reference book for any researcher in operations and supply chain management (OSCM). Many students begin their careers in research limited by the one or few approaches taken by their department. The concise, accessible overviews found here equip them with an understanding of a variety of methods and how to use them, enabling students to tailor their research project to their own strengths and goals. The more seasoned researcher will find comprehensive descriptions and analyses on a wide variety of research approaches. This updated and enhanced edition responds to the latest developments in OSCM, including the growing prominence of services and production of intangible products, the complete supply chain, and the increasing use of secondary data and of mixed approaches. Alternative research approaches are included and explored to help with the planning of research. This edition also includes expanded literature reviews and analysis to guide students towards the next steps in their reading, and more detailed step-by-step advice to tie theory with the research. Including contributions from an impressive range of the field’s leading thinkers in OSCM research, this is a guide that no one embarking on an OSCM research project should be without. Previous editions of this book were published under the title Research Methods for Operations Management and Researching Operations Management.

Download or read book Integrated Production Control Systems written by David D. Bedworth and published by John Wiley & Sons. This book was released on 1987 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the quantitative approaches necessary to computer-integrated manufacturing systems, and integrates major topics covering all phases of the production control cycle: production information processing and flow, production planning, forecasting, material requirements planning and monetary control, and scheduling. This new edition features a compendium set of 11 user-friendly computer programs for the IBM PC that enhance the teaching power of the text, allowing readers to solve real-life problems. Among programs included are growth forecasting, aggregate planning, material requirements planning, lot sizing and inventory control, and limited-resource scheduling. The chapters on scheduling give particularly thorough coverage on this difficult subject. Solutions are clearly presented, with many examples and exercises included in the text.

Download or read book Efficiency of Manufacturing Systems written by B. Wilson and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Research Institute (A.R. 1.) on "the efficiency of Manufacturing Systems" was held under the auspices of the NATO Special Programm~ Panel on Systems Science as a part of the NATO Science Committee's continuous effort to promote the advancement of science through international co-operation. Advanced Research Institutes are organised for the purpose of bringing together experts in a particular field of interest to identify and make known the present state of knowledge in that area and, through informed debate, to make recommendations for directions for future research that would benefit the community at large. To this end two kinds of contribution were obtained by invitation. There were those papers which were about the current state of work in the area of manufacturing systems and its organisation; in addition three theme papers were presented to provide a stimulus to the discussion in terms of ways of thinking, both about the area and about the kind of research needed.

Download or read book Emerging Optimization Techniques In Production Planning Control written by Onwubolu Godfrey C and published by World Scientific. This book was released on 2002-05-20 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a concept of adaptive memory programming (AMP) for grouping a number of generic optimization techniques used in combinatorial problems. The same common features seen in the use of memory and a local search procedure drive these emerging optimization techniques, which include artificial neural networks, genetic algorithms, tabu search and ant systems. The primary motivation for AMP, therefore, is to group and unify all these techniques so as to enhance the computational capabilities that they offer for combinatorial problems encountered in real life in the area of production planning and control.The text describes the theoretical aspects of AMP together with relevant production planning and control applications. It covers the techniques, applications and algorithms. The book has been written in such a way that it can serve as an instructional text for students and those who are taking tuition on their own. The numerical examples given are first solved manually to enhance the reader's understanding of the material, and that is followed by a description of the algorithms and computer results. This way, the student can fully follow the material. The algorithms described for each application are useful to both students and practitioners in grasping how to implement similar applications in computer code using emerging optimization techniques.

Download or read book The Capacity Aspect of Inventories written by Roland Bemelmans and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the production in an industrial organisation is very complex. There are two different reasons for this complexity. On the one hand, complexity is due to the variety in range and in level of detail of the activities that playa role in such a control (think of manufacturing process development, capacity planning, coordinating the flow of material through the production process, releasing of workorders, and scheduling). On the other hand, the production process itself may be complex (many products, many stages, complex interrelationships between resources, and uncertainty in the availability of resources). To deal with the first cause for complexity, one creates different, but coordinated levels of control. At each of these levels a specific part of the control of the production process is accounted for (see Anthony [3]). To deal with the second cause for complexity, one groups manufacturing steps into so-called production units (see Bertrand [8]). Each production unit is responsible for a specific part of the production process. Of course, these production units have to be coordinated to ensure that the products are manufactured timely and efficiently. This activity will be referred to as material coordination (see Bertrand [8]).