Download or read book Production Chemicals for the Oil and Gas Industry Second Edition written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.

Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.

Download or read book Chemical Process Technology written by Jacob A. Moulijn and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on actual industrial processes, e.g. the production of light alkenes, synthesis gas, fine chemicals, polyethene, it encourages the reader to think “out of the box” and invent and develop novel unit operations and processes. Reflecting today’s emphasis on sustainability, this edition contains new coverage of biomass as an alternative to fossil fuels, and process intensification. The second edition includes: New chapters on Process Intensification and Processes for the Conversion of Biomass Updated and expanded chapters throughout with 35% new material overall Text boxes containing case studies and examples from various different industries, e.g. synthesis loop designs, Sasol I Plant, Kaminsky catalysts, production of Ibuprofen, click chemistry, ammonia synthesis, fluid catalytic cracking Questions throughout to stimulate debate and keep students awake! Richly illustrated chapters with improved figures and flow diagrams Chemical Process Technology, Second Edition is a comprehensive introduction, linking the fundamental theory and concepts to the applied nature of the subject. It will be invaluable to students of chemical engineering, biotechnology and industrial chemistry, as well as practising chemical engineers. From reviews of the first edition: “The authors have blended process technology, chemistry and thermodynamics in an elegant manner... Overall this is a welcome addition to books on chemical technology.” – The Chemist “Impressively wide-ranging and comprehensive... an excellent textbook for students, with a combination of fundamental knowledge and technology.” – Chemistry in Britain (now Chemistry World)

Download or read book Waste Management in the Chemical and Petroleum Industries written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2019-09-10 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unravels fundamental engineering for the treatment, recovery, and disposal of solid waste, sludge and wastewater in the petroleum, chemical, and unconventional oil and gas processing industries This new edition unravels essential requirements for the process design and engineering of the equipment and facilities pertaining to waste management for gas refineries, chemical plants, oil terminals, and petrochemical plants. Updated throughout, Waste Management in the Chemical and Petroleum Industries, Second Edition offers chapters on wastewater treatment; physical unit operations; chemical treatment; biological treatment; and wastewater treatment in unconventional oil and gas industries. It also covers wastewater sewer systems; sewage treatment; and solid waste treatment and disposal. New topics include: water pollution terminals the design procedure for effluent water pollution control spill prevention and control groundwater pollution control wastewater pollution control in crude oil terminals Information on the source of polymeric plants examination of water and wastewater radioactivity soil pollution pipeline leak consequence evaluation Waste Management in the Chemical and Petroleum Industries, Second Edition is an ideal text for researchers and advanced students in chemical, petroleum, and environmental fields, as well as for those in civil engineering.

Download or read book Chemistry of Petrochemical Processes written by Sami Matar Ph.D. and published by Elsevier. This book was released on 2001-07-26 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chemistry of Petrochemical Processes, readers find a handy and valuable source of information containing insights into petrochemical reactions and products, process technology, and polymer synthesis. The book reviews and describes the reactions and processes involved in transforming petroleum-based hydrocarbons into the chemicals that form the basis of the multi-billion dollar petrochemical industry. In addition, the book includes information on new process developments for the production of raw materials and intermediates for petrochemicals that have surfaced since the book's first edition. - Provides a quick understanding of the chemical reactions associated with oil and gas processing - Contains insights into petrochemical reactions and products, process technology, and polymer synthesis

Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. - Flow diagrams and descriptions of more than 250 leading-edge process technologies - An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials - Properties, availability and environmental impact of various raw materials used in hydrocarbon processing

Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Download or read book Petroleum and Gas Field Processing written by H.K. Abdel-Aal and published by CRC Press. This book was released on 2003-07-03 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immediate product extracted from oil and gas wells consists of mixtures of oil, gas, and water that is difficult to transport, requiring a certain amount of field processing. This reference analyzes principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. It details strategies in equipment selection and system design, field development and operation, and process simulation and control to increase plant productivity and safety and avoid losses during purification, treatment, storage, and export. Providing guidelines for developing efficient and economical treatment systems, the book features solved design examples that demonstrate the application of developed design equations as well as review problems and exercises of key engineering concepts in petroleum field development and operation.

Download or read book Beyond Oil and Gas written by George A. Olah and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently consuming about 85 million barrels of oil a day, and about two-thirds as much natural gas equivalent, both derived from non-renewable natural sources. In the foreseeable future, our energy needs will come from any available alternate source. Methanol is one such viable alternative, and also offers a convenient solution for efficient energy storage on a large scale. In this updated and enlarged edition, renowned chemists discuss in a clear and readily accessible manner the pros and cons of humankind's current main energy sources, while providing new ways to overcome obstacles. Following an introduction, the authors look at the interrelationship of fuels and energy, and at the extent of our non-renewable fossil fuels. They also discuss the hydrogen economy and its significant shortcomings. The main focus is on the conversion of CO2 from industrial as well as natural sources into liquid methanol and related DME, a diesel fuel substitute that can replace LNG and LPG. The book is rounded off with an optimistic look at future possibilities. A forward-looking and inspiring work that vividly illustrates potential solutions to our energy and environmental problems.

Download or read book Technology for Chemical Cleaning of Industrial Equipment 2nd Edition written by Wayne W. Frenier and published by . This book was released on 2018-05-30 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents new developments that have affected the commercial use of chemicals and devices to clean industrial equipment, with emphasis on the mechanisms of important cleaning processes and solvents and will give an overview of the science and technology of the formation and removal of fouling deposits in the industrial equipment environment.

Download or read book Introduction to Chemicals from Biomass written by James H. Clark and published by John Wiley & Sons. This book was released on 2014-12-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Chemicals from Biomass, Second Edition presents an overview of the use of biorenewable resources in the 21st century for the manufacture of chemical products, materials and energy. The book demonstrates that biomass is essentially a rich mixture of chemicals and materials and, as such, has a tremendous potential as feedstock for making a wide range of chemicals and materials with applications in industries from pharmaceuticals to furniture. Completely revised and updated to reflect recent developments, this new edition begins with an introduction to the biorefinery concept, followed by chapters addressing the various types of available biomass feedstocks, including waste, and the different pre-treatment and processing technologies being developed to turn these feedstocks into platform chemicals, polymers, materials and energy. The book concludes with a discussion on the policies and strategies being put in place for delivering the so-called Bioeconomy. Introduction to Chemicals from Biomass is a valuable resource for academics, industrial scientists and policy-makers working in the areas of industrial biotechnology, biorenewables, chemical engineering, fine and bulk chemical production, agriculture technologies, plant science, and energy and power generation. We need to reduce our dependence on fossil resources and increasingly derive all the chemicals we take for granted and use in our daily life from biomass – and we must make sure that we do this using green chemistry and sustainable technologies! For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: • The biorefinery concept • Biomass feedstocks • Pre-treatment technologies • Platform molecules from renewable resources • Polymers from bio-based monomers • Biomaterials • Bio-based energy production Praise for the 1st edition: “Drawing on the expertise of the authors the book involves a degree of plant biology and chemical engineering, which illustrates the multidisciplinary nature of the topic beautifully” - Chemistry World

Download or read book Petroleum Economics and Engineering Second Edition written by M.A. Al-Sahlawi and published by CRC Press. This book was released on 1992-01-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated to reflect major changes in the field, this second edition presents an integrated and balanced view of current attitudes and practices used in sound economic decision-making for engineering problems encountered in the oil industry. The volume contains many problem-solving examples demonstrating how economic analyses are applied to different facets of the oil industry.;Discussion progresses from an introduction to the industry, through principles and techniques of engineering economics, to the application of economic methods to the oil industry. It provides information on the types of crude oils, their finished products and resources of natural gas, and also summarizes worldwide oil production and consumption data.

Download or read book Gas Well Deliquification written by James F. Lea Jr. and published by Gulf Professional Publishing. This book was released on 2011-08-30 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid loading can reduce production and shorten the lifecycle of a well costing a company millions in revenue. A handy guide on the latest techniques, equipment, and chemicals used in de-watering gas wells, Gas Well Deliquification, 2nd Edition continues to be the engineer's choice for recognizing and minimizing the effects of liquid loading. The 2nd Edition serves as a guide discussing the most frequently used methods and tools used to diagnose liquid loading problems and reduce the detrimental effects of liquid loading on gas production. With new extensive chapters on Coal Bed Methane and Production this is the essential reference for operating engineers, reservoir engineers, consulting engineers and service companies who supply gas well equipment. It provides managers with a comprehensive look into the methods of successful Production Automation as well as tools for the profitable use, production and supervision of coal bed gases. - Turnkey solutions for the problems of liquid loading interference - Based on decades of practical, easy to use methods of de-watering gas wells - Expands on the 1st edition's useful reference with new methods for utilizing Production Automation and managing Coal Bed Methane

Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elements of Petroleum Geology written by Richard C. Selley and published by Academic Press. This book was released on 2022-06-11 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Petroleum Geology, Fourth Edition is a useful primer for geophysicists, geologists and petroleum engineers in the oil industry who wish to expand their knowledge beyond their specialized area. It is also an excellent introductory text for a university course in petroleum geoscience. This updated edition includes new case studies on non-conventional exploration, including tight oil and shale gas exploration, as well as coverage of the impacts on petroleum geology on the environment. Sections on shale reservoirs, flow units and containers, IOR and EOR, giant petroleum provinces, halo reservoirs, and resource estimation methods are also expanded. - Written by a preeminent petroleum geologist and sedimentologist with decades of petroleum exploration in remote corners of the world - Covers information pertinent to everyone working in the oil and gas industry, especially geophysicists, geologists and petroleum reservoir engineers - Fully revised with updated references and expanded coverage of topics and new case studies

Download or read book The John Zink Hamworthy Combustion Handbook Second Edition written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2012-12-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Environmental, cost, and fuel consumption issues add further complexity, particularly in the process and power generation industries. Dedicated to advancing the art and science of industrial combustion, The John Zink Hamworthy Combustion Handbook, Second Edition: Volume One – Fundamentals gives you a strong understanding of the basic concepts and theory. Under the leadership of Charles E. Baukal, Jr., top combustion engineers and technologists from John Zink Hamworthy Combustion examine the interdisciplinary fundamentals—including chemistry, fluid flow, and heat transfer—as they apply to industrial combustion. What’s New in This Edition Expanded to three volumes, with Volume One focusing on fundamentals Extensive updates and revisions throughout Updated information on HPI/CPI industries, including alternative fuels, advanced refining techniques, emissions standards, and new technologies Expanded coverage of the physical and chemical principles of combustion New practices in coal combustion, such as gasification The latest developments in cold-flow modeling, CFD-based modeling, and mathematical modeling Greater coverage of pollution emissions and NOx reduction techniques New material on combustion diagnostics, testing, and training More property data useful for the design and operation of combustion equipment Coverage of technologies such as metallurgy, refractories, blowers, and vapor control equipment Now expanded to three volumes, the second edition of the bestselling The John Zink Combustion Handbook continues to provide the comprehensive coverage, up-to-date information, and visual presentation that made the first edition an industry standard. Featuring color illustrations and photographs throughout, Volume One: Fundamentals helps you broaden your understanding of industrial combustion to better meet the challenges of this field. For the other volumes in the set, see The John Zink Hamworthy Combustion Handbook, Second Edition: Three-Volume Set.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors