Download or read book Product Environmental Information and Product Policies How Product Environmental Footprint PEF changes the situation written by Nissinen, Ari and published by Nordic Council of Ministers. This book was released on 2019-11-18 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliable information is needed to drive the market towards ecologically sound products. Product Environmental Footprint has many properties that are new to the Life Cycle Assessment tradition, increasing the consistency, accuracy and comparability of the results. It is important to start the organization of the PEF scheme, and invest in efforts to rapidly increase the number of product and service groups and actual product-specific PEF reports involved in the PEF scheme. Possibilities for common information basis and coordination between environmental information sources for the various product policy instruments and the PEF should be explored. Cooperation between type 1 eco-labels like the Nordic Swan and the forthcoming PEF scheme(s) is important.
Download or read book Nordic Swan Ecolabel and Product Environmental Footprint Focus on Product Environmental Information written by Suikkanen, Johanna and published by Nordic Council of Ministers. This book was released on 2019-09-27 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this report is to compare the Nordic Swan Ecolabel and the Product Environmental Footprint with a focus on environmental information. The report compares the methods used by the Nordic Swan Ecolabel and the PEF to identify the product-group-specific relevant environmental aspects. The analysis is based on the currently valid Swan Criteria and pilot phase final PEF Category Rules (PEFCRs). The report concludes that there are methodological differences in the way product comparisons are made. The report proposes recommendations for both schemes in terms of co-operation and required further work, related to the differences in methodological approaches, to avoid very different results in what will be considered as an environmentally sound product.
Download or read book Integrated Product Policy 2019 written by Preben Kristensen and published by Nordic Council of Ministers. This book was released on 2020-01-14 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Commission adopted in January 2015 an Action Plan for the Circular Economy. The plan suggest measures for how the market may significantly contribute to a circular economy. Now the methodological fundament needed has been finally established and it remain for the new Commission to demonstrate how the toolbox may be applied in a coherent and effective European product policy. The toolbox is the result of nearly 15 years of work and comprises harmonized guidelines for lifecycle based assessment of environmental footprints within specific product categories (PEFCR) and organization sectors (OEFSR) and also guidelines for 3rd party verification, benchmarking and communication. The guidelines have been tested in more than 20 pilot projects representing more than 50% of the respective (European) supply chains regarding product categories like dairy, shoes and textiles. The guidelines build upon lifecycle based Product and Organizational Environmental Footprint (PEF and OEF) standards developed by the Commission and published in Off. Jour. in 2013. By the use of the developed toolbox it is now for the first time possible uniquely at the European market to define and credible communicate what is “a green product” and what is not. The paper discusses possible measures for how to apply the toolbox in establishing and implementing a coherent new European product policy with objectives to significantly reduce especially products environmental (and climate) footprints in the future
Download or read book Environmental Impact of Agro Food Industry and Food Consumption written by Charis M. Galanakis and published by Academic Press. This book was released on 2020-11-18 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Impact of Agro-Food Industry and Food Consumption covers trends associated with the impact of food production on the environment using lifecycle analysis and the standard methods used to estimate the food industry’s environmental impact. The book discusses city-scale actions to estimate the environmental impact of food systems, including the meat chain, feeding crops to farmed fish, the confectionary industry, agriculture, tea processing, cheese production, the dairy industry, cold chain, and ice cream production. Food waste and consumption in hospitality and global diets round out these interesting discussions. Written for food scientists, technologists, engineers, chemists, governmental regulatory bodies, environmentalists, environmental technologists, environmental engineers, researchers, academics and professionals working in the food industry, this book is an essential resource on sustainability in the food industry. Addresses all levels of the food chain Provides solutions for the food industry to estimate and reduce environmental impact Assists members of the food industry in optimizing their current performance and reducing their environmental footprint
Download or read book Climate Accounting in Public Procurements Status in the Nordic Countries written by Standley, Martin and published by Nordic Council of Ministers. This book was released on 2022-09-08 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2022-544/ Public procurement is increasingly being used to implement political goals, often related to sustainability. A prioritised goal at present is reducing the climate emissions caused by our consumption of goods and services. For contracting authorities (CA), taking climate aspects into account when procuring requires effort and can increase costs. They need data to be able to select which procurements, products and suppliers can give most climate effect. At present relevant, comparable climate data is not readily available. This report analyses the needs for CAs and the current status in the Nordic countries as a basis for planning actions to better the availability of product-related climate data.
Download or read book Rethinking Building Skins written by Eugenia Gasparri and published by Woodhead Publishing. This book was released on 2021-12-05 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rethinking Building Skins: Transformative Technologies and Research Trajectories provides a comprehensive collection of the most relevant and forward-looking research in the field of façade design and construction today, with a focus on both product and process innovation. The book brings together the expertise, creativity, and critical thinking of more than fifty global innovators from both academia and industry, to guide the reader in translating research into practice. It identifies new opportunities for the construction sector to respond to present challenges, towards a more sustainable, efficient, connected, and safe future. Introduces the reader to the role of façades with respect to the main challenges ahead Provides an overview of the major façade technological advancements throughout history and identifies prospective research trajectories Includes interviews with key industry players from different backgrounds and expertise Showcases a comprehensive range of leading research topics in the field, organised by product and process innovation Covers major innovations across the value chain including façade design, fabrication, construction, operation and maintenance, and end-of-life Contributes towards the definition of an international research agenda and identifies emerging market opportunities for the façade industry
Download or read book Product and Organisation written by and published by . This book was released on 2018 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Commission is looking at the outcomes of the environmental footprint pilot phase and will start to discuss whether and how the methods could reinforce policies related to environmental information and the circular economy.
Download or read book Nordic Swan Ecolabel and Organisation Environmental Footprint Focus on the organisation environmental information used in the retail sector written by Salo, Hanna and published by Nordic Council of Ministers. This book was released on 2019-09-27 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Organisation Environmental Footprint (OEF) initiative of the European Commission and the Nordic Swan Ecolabel both aim at more sustainable consumption and production. We compared the two schemes in relation to their environmental information concerning the retail sector. The Swan aims to push stores to perform better and to help customers make environmental choices, whereas the OEF aims to create a common Life Cycle Assessment based methodology to assess impacts related to a retailer’s product portfolio. Overall, the OEF is considered a broader approach still under development, while the Swan is well-known in the Nordics. Their scopes, relevant impact categories and life cycle stages differed. However, climate change, resource use and biodiversity impacts were significant in both schemes. Possible synergies concern criteria setting, measurement and communication.
Download or read book Environmental Information in Instructions for Use of Consumer Products written by Ari Nissinen and published by Nordic Council of Ministers. This book was released on 2005-03-11 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Union has highlighted the issue of environmentally sound use of products in the context of Integrated Product Policy, IPP. Accordingly, consumers should have easy access to understandable, relevant and credible environmental information. Information about product characteristics is available in different forms and sources, but in many cases, relevant environmental information is not available on the product itself. The study described in this report was initiated in order to produce information on the state of user instructions regarding environmental information. User manuals of passenger cars and refrigerators were focused on, examining the advice which could diminish the harmful environmental effects of the use of these products. Other studied products included such durable products as textiles and furniture as well as such consumables as cleaning chemicals and recyclable paper products. The study raised many ideas about actions that could promote the status and 'eco-development' of instructions for use.
Download or read book Advances in Vinegar Production written by Argyro Bekatorou and published by CRC Press. This book was released on 2019-09-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industrial vinegar production, there are three main types of methods involved; the slow, handcrafted, traditional method ("Orleans" or "French" method), and the rapid submerged and generator methods. The current trend is to fuse traditional techniques with state-of-the-art technologies, and a variety of approaches have been developed to increase fermentation efficiency and reduce cost and fermentation time. This book reports on all the recent innovations in vinegar production, and compares them to the traditional submerged fermentation systems. The new trends on raw materials, substrate pretreatment strategies, alcoholic fermentation, and acetitification systems are also reviewed.
Download or read book Product Design and Life Cycle Assessment written by Ireneusz Zbicinski and published by Baltic University Press. This book was released on 2006 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Use of ecodesign tools and expectations for Product Environmental Footprint Case study of Nordic textile and IT companies written by Salo, Hanna and published by Nordic Council of Ministers. This book was released on 2019-09-27 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of ecodesign tools and expectations for Product Environmental FootprintThe report examines the implementation of ecodesign and green innovations inNordic textile and IT companies. The findings of this report are: 1) The respondents are fairly mature in terms of how they integratedenvironmental sustainability into their operations. Companies are mainlydriven by general willingness but deterred by cost increases. 2) Companies remain focused on technical innovations, whereas functionalinnovations are lagging behind. 3) Ecodesign tools and research and development activities are highly relevantfor promoting innovations. 4) The main tools used are Type I Ecolabels, Life Cycle Assessment and CarbonFootprint. 5) Few respondents are familiar with PEF, but many are interested in it. PEF is predominantly seen as a way to evaluate the accuracy of environmentalproduct claims.
Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.
Download or read book Environmentally Responsible Supply Chains in an Era of Digital Transformation written by Pietro Evangelista and published by Edward Elgar Publishing. This book was released on 2024-05-02 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, available technologies can help make a supply chain resilient in volatile times whilst also keeping it responsible. Environmentally Responsible Supply Chains in an Era of Digital Transformation focuses on the linkages between digital technologies and environmental sustainability research and outlines synergies for more resilient, efficient and transparent supply chain management practices.
Download or read book Towards a Sustainable Bioeconomy Principles Challenges and Perspectives written by Walter Leal Filho and published by Springer. This book was released on 2018-01-19 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions from scientists and industry representatives on achieving a sustainable bioeconomy. It also covers the social sciences, economics, business, education and the environmental sciences. There is an urgent need to optimise and maximise the use of biological resources, so that primary production and processing systems can generate more food, fibre and other bio-based products with less environmental impacts and lower greenhouse gas emissions. In other words, we need a “sustainable bioeconomy” – a term that encompasses the sustainable production of renewable resources from land, fisheries and aquaculture environments and their conversion into food, feed, fibre bio-based products and bio-energy, as well as related public goods. Despite the relevance of achieving a sustainable bioeconomy, there are very few publications in this field. Addressing that gap, this book illustrates how biological resources and ecosystems could be used in a more sustainable, efficient and integrated manner – in other words, how the principles of sustainable bioeconomy can be implemented in practice. Given its interdisciplinary nature, the field of sustainable bioeconomy offers a unique opportunity to address complex and interconnected challenges, while also promoting economic growth. It helps countries and societies to make a transition and to use resources more efficiently, and shows how to rely less on biological resources to satisfy industry demands and consumer needs. The papers are innovative, cross-cutting and include many practice-based lessons learned, some of which are reproducible elsewhere. In closing, the book, prepared by the Inter-University Sustainable Development Research Programme (IUSDRP) and the World Sustainable Development Research and Transfer Centre (WSD-RTC), reiterates the need to promote a sustainable bioeconomy today.
Download or read book Advances in Design Engineering III written by Francisco Cavas-Martínez and published by Springer Nature. This book was released on 2023-02-13 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the XXXI International Congress INGEGRAF “Graphic Expression: reunion, reflection, representation,” held on June 29–30 and July 1, 2021, in Málaga, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design, innovative design and computer-aided design. Further topics covered include virtual simulation and reverse engineering, additive manufacturing, product manufacturing,engineering methods in medicine and education, representation techniques and nautical, engineering and construction, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; but also they are intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.
Download or read book Special Types of Life Cycle Assessment written by Matthias Finkbeiner and published by Springer. This book was released on 2016-07-27 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents specialised methods and tools built on classical LCA. In the first book-length overview, their importance for the further growth and application of LCA is demonstrated for some of the most prominent species of this emerging trend: Carbon footprinting; Water footprinting; Eco-efficiency assessment; Resource efficiency assessment; Input-output and hybrid LCA; Material flow analysis; Organizational LCA. Carbon footprinting was a huge driver for the market expansion of simplified LCA. The discussions led to an ample proliferation of different guidelines and standards including ISO/TS 14067 on Carbon Footprint of Product. Atsushi Inaba (Kogakuin University, Tokyo, Japan) and his eight co-authors provide an up-to-date status of Carbon Footprint of Products. The increasing relevance of Water Footprinting and the diverse methods were the drivers to develop the ISO 14046 as international water footprint standard. Markus Berger (Technische Universität Berlin, Germany), Stephan Pfister (ETH Zurich, Switzerland) and Masaharu Motoshita (Agency of Industrial Science and Technology, Tsukuba, Japan) present a status of water resources and demands from a global and regional perspective. A core part is the discussion and comparison of the different water footprint methods, databases and tools. Peter Saling from BASF SE in Ludwigshafen, Germany, broadens the perspective towards Eco-efficiency Assessment. He describes the BASF-specific type of eco-efficiency analysis plus adaptions like the so-called SEEBALANCE and AgBalance applications. Laura Schneider, Vanessa Bach and Matthias Finkbeiner (Technische Universität Berlin, Germany) address multi-dimensional LCA perspectives in the form of Resource Efficiency Assessment. Research needs and proposed methodological developments for abiotic resource efficiency assessment, and especially for the less developed area of biotic resources, are discussed.The fundamentals ofInput-output and Hybrid LCA are covered by Shinichiro Nakamura (Waseda University, Tokyo, Japan) and Keisuke Nansai (National Institute for Environmental Studies, Tsukuba, Japan). The concepts of environmentally extended IO, different types of hybrid IO-LCA and the waste model are introduced. David Laner and Helmut Rechberger (Vienna University of Technology, Austria) present the basic terms and procedures of Material Flow Analysismethodology. The combination of MFA and LCA is discussed as a promising approach for environmental decision support. Julia Martínez-Blanco (Technische Universität Berlin, Germany; now at Inèdit, Barcelona, Spain), Atsushi Inaba (Kogakuin University, Tokyo, Japan) and Matthias Finkbeiner (Technische Universität Berlin, Germany) introduce a recent development which could develop a new trend, namely the LCA of Organizations.