Download or read book Product and process design for successful remanufacturing written by Erik Sundin and published by . This book was released on 2004 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Systems and Technologies for the New Frontier written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2008-05-19 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with new directions in manufacturing systems, given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material includes reports of work from both scientific and engineering standpoints.

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.

Download or read book Integrated Product and Process Design and Development written by Edward B. Magrab and published by CRC Press. This book was released on 2009-07-28 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this book discusses an integrated product and process design that has been successfully used to conceptualize, design, and rapidly product competitively-priced quality products. It examines the overlapping, interacting, and iterative nature of the engineering aspects that impact the product realization process. A detailed introduction to the creation of high quality products, the new edition explores the role of innovation, requirements engineering, smart materials, different rapid prototyping methods, and life-cycle cost determination, to name just a few. The book delineates proven methods that have been used successfully to create products.

Download or read book Sustainable Product Design and Development written by Anoop Desai and published by CRC Press. This book was released on 2020-12-03 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the process of sustainable product design and development. It presents design guidelines that help prolong the life of a product and minimize its environmental impact. These guidelines specifically enable product design for end-of-life (EoL) objectives such as reuse, recycling and remanufacturing. Sustainable Product Design and Development also presents mathematical models that will help the designer determine the cost of designing sustainable products. This cost can be computed early during the design stage of a product. Sustainable Product Design and Development presents different ways and means by which a product can address all three pillars of sustainability—environmental conservation, social sustainability, and economic sustainability. Various case studies are incorporated in different chapters. Case studies on designing products for assembly, disassembly and remanufacturing have been presented in their respective chapters. The book also provides an overview of global environmental legislation to help the reader grasp the importance of waste management and sustainable product design. This book is aimed at professionals, engineering students, environmental scientists, and those in the business environment.

Download or read book Advances in Manufacturing Production Management and Process Control written by Waldemar Karwowski and published by Springer. This book was released on 2018-06-26 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using 3D printers, rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Other key topics include digital modeling systems and additive manufacturing, together with their applications in a number of fields, e.g in bioengineering/biomedicine, in the aerospace, maritime and military fields or for archeological and historical purposes, such as preserving structures, but not limited to this. The book is based on three AHFE 2018 affiliated conferences i.e. the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE 2018 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2018 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, which were held on July 21-25, 2018, in Orlando, Florida, USA.

Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.

Download or read book Introduction to Product Service System Design written by Tomohiko Sakao and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Introduction to Product/Service-System Design" contains a collection of practical examples demonstrating how to design a PSS in industry. These recent examples are the results of applying various theories developed in different countries and therefore accommodating diverse cultural differences. Providing a useful overall guide to the state of the art in theory and practice, each chapter covers the cutting edge of a different methodology or practice. The book’s focus on design is also evident in the discussion of how to anticipate and utilize the various dynamics within each dimension. "Introduction to Product/Service-System Design" will help improve working processes and inspire creative thinking for the wide range of people involved in designing a PSS: designers, marketing professionals, sales staff, production engineers, and service engineers. It can also serve as a reference book for university students on advanced courses.

Download or read book SPS2022 written by A.H.C. Ng and published by IOS Press. This book was released on 2022-05-17 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realization of a successful product requires collaboration between developers and producers, taking account of stakeholder value, reinforcing the contribution of industry to society and enhancing the wellbeing of workers while respecting planetary boundaries. Founded in 2006, the Swedish Production Academy (SPA) aims to drive and develop production research and education and to increase cooperation within the production area. This book presents the proceedings of the 10th Swedish Production Symposium (SPS2022), held in Skövde, Sweden, from 26-29 April 2022. The overall theme of the symposium was ‘Industry 5.0 Transformation – Towards a Sustainable, Human-Centric, and Resilient Production’. Since its inception in 2007, the purpose of SPS has been to facilitate an event at which members and interested participants from industry and academia can meet to exchange ideas. The 69 papers accepted for presentation here are grouped into ten sections: resource-efficient production; flexible production; humans in the production system; circular production systems and maintenance; integrated product and production development; industrial optimization and decision-making; cyber-physical production systems and digital twins; innovative production processes and additive manufacturing; smart and resilient supply chains; and linking research and education. Also included are three sections covering the Special Sessions at SPS2022: artificial intelligence and industrial analytics in industry 4.0; development of resilient and sustainable production systems; and boundary crossing and boundary objects in product and production development. The book will be of interest to all those involved in the development and production of future products.

Download or read book Towards Lean Remanufacturing written by Jelena Kurilova-Pališaitien? and published by Linköping University Electronic Press. This book was released on 2015-05-25 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an environmentally sound material recovery option which is essential to compete for sustainable manufacturing. The aim with remanufacturing at a majority of companies is to prolong physical product performance by delivering the same or betterthan-original product quality. In general, remanufacturing is an industrial process that brings used products back to useful life by requiring less effort than is demanded by the initial production process. Consequently, from a product life-cycle perspective, remanufacturing generates great product value. Remanufacturers lag behind manufacturers since they often face complex and unpredictable material and information flows. Based on a review of remanufacturing research, remanufacturing challenges in material and information flows can be classified into three groups: insufficient product quality, long and unstable process lead times, and an unpredictable level of inventory. While some remanufacturing researchers state that manufacturing and remanufacturing are significantly different, they have more in common than many other processes operations. Therefore, to sustain competitive remanufacturing, companies investigate an opportunity for improvement through the employment of lean production that generates significant benefits for manufacturers. In order to investigate the potential to address remanufacturing challenges by lean production, a Minimum time for material and information flow analysis (MiniMifa) method was developed. This method originates from the value stream mapping (VSM) method, broadly practiced to bring lean to manufacturing companies. The focus of MiniMifa was to collect empirical data on the identified groups of remanufacturing challenges from the remanufacturing perspective, and to provide a basis for the development of improvements originating from lean principles. Lean production was selected for this research due to its system perspective on material and information flows. Among the defined lean principles in remanufacturing, a pull principle was investigated at the case companies. The suggested principle demonstrated a reduction in lead time, followed by improvements in inventory level and product quality. However, in order to become lean, remanufacturers have to overcome three levels of lean remanufacturing challenges: external and internal challenges as well as lean wastes. Finally, this research reduces the gap between academia and industry by contributing with a possible solution to the identified remanufacturing challenges in material and information flows.

Download or read book Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering written by Davim, J. Paulo and published by IGI Global. This book was released on 2012-07-31 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and design are often a necessary steps for an industry to become effective. Industry modeling can help to bridge the communication gap among engineers and system designers. Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering examines the principles of physics and materials science for analysis, design, manufacturing and maintenance of mechanical equipments and systems. Targeting researchers, practitioners, and academicians, this volume promotes innovative findings in mechanical, manufacturing and materials engineering.

Download or read book Remanufacturing Initiation for Original Equipment Manufacturers written by Johan Vogt Duberg and published by Linköping University Electronic Press. This book was released on 2024-04-29 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an industrial process in which a core – a used, discarded, or broken product – is transformed into a product with a like-new specification and condition. However, to this date, remanufacturing activities on the market are few compared to manufacturing. There are several types of remanufacturers; the least common type is the original equipment remanufacturer, an original equipment manufacturer that not only manufactures new products but also remanufactures cores of its own products. Remanufacturing is potentially becoming a more widely used industrial process for original equipment manufacturers, and increased remanufacturing activities can positively contribute to the environment. The contribution comes from a reduction of raw material and energy consumption compared to manufacturing. Therefore, remanufacturing has the potential to decouple environmental impact from economic growth, thus contributing to more sustainable societies. However, assessing the benefits of remanufacturing does not directly correlate to growth within the remanufacturing industry. To encapsulate the environmental, social, and economic benefits of remanufacturing, manufacturers need to be aware of how remanufacturing can be initiated and implemented in practice. Therefore, the objective of this dissertation is to develop support measures for original equipment manufacturers to initiate profitable remanufacturing. This research takes a stand in case study and transdisciplinary research where the initiation of profitable remanufacturing is studied at two original equipment manufacturers. The research study developed knowledge of how remanufacturing could be incorporated into existing operations at original equipment manufacturers. In parallel, financial assessments based on cost-benefit analysis were built to measure how well the case companies could perform remanufacturing. For the case study research, seven remanufacturing scenarios were developed, ranging from centralised remanufacturing performed by the original equipment manufacturer to decentralised performed at multiple locations using a retail network. Which scenario is preferable depends on, for example, risk-consciousness, cooperation between actors, and volume targets. However, given ideal circumstances, remanufacturing in-house in a centralised scenario was shown to be the most beneficial for the investigated original equipment manufacturer since the fewer middle hands and economies of scale also potentially enable lower costs. For the transdisciplinary research, the remanufacturing initiation was business model-centric, meaning that the remanufacturing system was a consequence of a decision for a specific business model. Here, a scenario-based analysis was developed to understand under which circumstances the business model with remanufacturing was more lucrative for the provider – the original equipment manufacturer – and less costly for the users – the customers. For this, a systematic assessment approach was developed consisting of three steps: (1) provide a cost overview for each business model, (2) create scenarios by modifying the cost drivers, and (3) combine scenarios to reach synergetic effects. Based on the case study, two sets of four prerequisites for initiating remanufacturing were derived. These are divided into essential and supporting prerequisites and illustrated through a framework called the Remanufacturing Rocket. The essential prerequisites highlight fundamental requirements to perform remanufacturing. Should one of these four factors be missing, remanufacturing cannot be successfully initiated. The supporting prerequisites are valuable to enhance the effectiveness and efficiency of the process, such as through streamlined operations, organisational change, or information exchange. Hence, to reach the fullest potential of remanufacturing, both the essential and the supporting prerequisites are needed. Furthermore, the area of financial assessments was explored in a systematic literature review to identify insights for developing such assessments tailored for individual original equipment manufacturers in initiating remanufacturing. For this, six perspectives for framing financial assessments are proposed. These cover the system boundaries for the assessments as well as the individual needs and visions of original equipment manufacturers. Additionally, a framework was developed to select financial assessment models for remanufacturing initiations based on ease of use and capability to handle complex datasets. Conclusively, it is proposed to apply the prerequisites for initiating remanufacturing together with a financial assessment in an iterative manner to investigate the profitability for original equipment manufacturers to initiate remanufacturing. The essential prerequisites influence the first iteration of the financial assessment, which then contributes to refinements of how the essential prerequisites should be aligned in an economically preferable way. Once satisfactory, another iterative process could be initiated between the supporting prerequisites and the financial assessment. By using the proposed approach, the prospects of profitable remanufacturing could be thoroughly investigated before attempting to initiate a process in practice, thus reducing the number of resources spent in vain. Additionally, the iterative process was integrated into a 5-step Approach For Initiating Remanufacturing (5AFIR) to guide original equipment manufacturers towards initiating profitable remanufacturing. Refabrikation (oder Wiederaufbereitung, engl. Remanufacturing) ist ein industrieller Prozess, bei dem ein Altteil – ein gebrauchtes, ausrangiertes, verschlissenes oder defektes Produkt – gemäß den Herstellerspezifikationen in einen neuwertigen Zustand gebracht wird. Heutzutage macht Refabrikation allerdings nur einen kleinen Teil der Fertigungsindustrie aus. Verschiedene Arten von Unternehmen betreiben Refabrikation, wobei Originalgerätehersteller, sogenannte OEMs (engl. für Original Equipment Manufacturer), am seltensten sind. Solche OEMs betreiben neben Produktion auch eine Wiederaufbereitung ihrer eigenen Produkte. Refabrikation kann sowohl ökologische als auch ökonomische Vorteile bringen und hat somit grundsätzlich hohes Marktpotential. Der geringere Rohstoff- und Energieverbrauch von Refabrikation im Vergleich zu Neuproduktion ist ein Beispiel für ökologischen Vorteil. Refabrikation ermöglicht außerdem, negative Umweltauswirkungen durch Produktion und Wirtschaftswachstum voneinander unabhängig zu machen und trägt somit zu nachhaltigem Wachstum bei. Allerdings hängt der Nutzen von Refabrikation nicht direkt mit dem Wachstum innerhalb der Refabrikationsbranche zusammen. Um die ökologischen, sozialen und ökonomischen Vorteile nutzen zu können, müssen Hersteller Kompetenz zur praktischen Umsetzung von Refabrikation aufbauen. Ziel dieser Dissertation ist daher die Entwicklung von Unterstützungsmaßnahmen und -konzepten für OEMs, die zu profitabler Refabrikation führen. Diese Arbeit basiert auf einer Fallstudie und auf transdisziplinärer Forschung, bei der die Einführung von profitabler Refabrikation bei zwei OEMs untersucht wurde. Die Fallstudie lieferte Erkenntnisse darüber, wie Refabrikation in bestehende Abläufe bei OEMs integriert werden kann. Außerdem wurden finanzielle Bewertungskriterien auf der Grundlage einer Kosten-Nutzen-Analyse erstellt, um messen zu können, wie erfolgreich die untersuchten Unternehmen Refabrikation implementieren könnten. Für die Fallstudie wurden sieben Refabrikationsszenarien entwickelt, die von zentraler Refabrikation durch das OEM bis zu dezentraler Refabrikation an mehreren Standorten durch ein Netzwerk von Niederlassungen reichen. Welches der Szenarien vorzuziehen ist, hängt beispielsweise vom Risikobewusstsein, der Zusammenarbeit der Akteure und den angestrebten Stückzahlen ab. Unter idealen Umständen erwies sich die unternehmensinterne Refabrikation mit zentralisierter Struktur als das vorteilhafteste Szenario. Für die untersuchten OEMs führten weniger Zwischenhändler und Größenvorteile zu geringeren Kosten. In der transdisziplinären Forschung dieser Dissertation wurde davon ausgegangen, dass das Refabrikationssystem aus der Entscheidung für ein bestimmtes Geschäftsmodell folgt. Basierend auf verschiedenen Szenarien wurde analysiert, unter welchen Umständen das Geschäftsmodell inklusive Refabrikation für den Anbieter (OEM) lukrativer und für die Anwender (Kunden) kostengünstiger war. Hierzu wurde ein systematisches Bewertungsschema entwickelt, das aus drei Schritten besteht: (1) Bereitstellung einer Kostenübersicht für jedes Geschäftsmodell, (2) Erstellung von Szenarien durch Modifikation der Kostentreiber und (3) Kombination von Szenarien, um Synergieeffekte zu erzielen. Anforderungen für die Einführung von Refabrikation wurden auf Basis der Fallstudie abgeleitet. Diese sind in vier essentielle und vier unterstützende Anforderungen eingeteilt und werden durch ein Modell namens Refabrikationsrakete veranschaulicht. Die essentiellen Anforderungen sind grundlegend für die Durchführung von Refabrikation. Ist eine dieser vier Anforderungen nicht erfüllt, kann Refabrikation nicht erfolgreich umgesetzt werden. Die unterstützenden Anforderungen steigern die Effektivität und Effizienz des Einführungsprozesses, beispielsweise durch optimierte Abläufe, organisatorische Änderungen oder Informationsaustausch. Um das volle Potenzial von Refabrikation auszuschöpfen, müssen sowohl die essentiellen als auch die unterstützenden Anforderungen erfüllt werden. Wirtschaftliche Bewertungskriterien wurden im Rahmen einer systematischen Literaturrecherche betrachtet. Ziel der Recherche war es, Erkenntnisse für die Entwicklung solcher Bewertungskriterien zu erlangen. Die Kriterien sollen dabei auf einzelne OEMs und die Einführung von Refabrikation zugeschnitten sein. In dieser Arbeit werden sechs Ansätze für die Entwicklung wirtschaftlicher Bewertungskriterien vorgeschlagen. Diese Ansätze behandeln sowohl Systemgrenzen für die Bewertungskriterien als auch individuelle Bedürfnisse und Ziele der OEM. Darüber hinaus wurde ein Rahmenwerk entwickelt, um wirtschaftliche Bewertungskriterien auf Basis ihrer Benutzerfreundlichkeit und ihrer Fähigkeit zur Bewältigung komplexer Datenmengen auszuwählen. Abschließend wird vorgeschlagen, die Anforderungen für die Einführung von Refabrikation zusammen mit einer wirtschaftlichen Bewertung iterativ zu prüfen, um die Rentabilität von Refabrikation für OEMs zu analysieren. Die essentiellen Anforderungen beeinflussen die erste Iterationsschleife der wirtschaftlichen Bewertung. In dieser ersten Schleife wird verfeinert, wie die Grundanforderungen wirtschaftlich sinnvoll kombiniert werden können. Es folgt eine zweite Iterationsschleife zwischen den unterstützenden Anforderungen und der finanziellen Bewertung. Mit diesem Vorgehen kann das Potential einer rentablen Refabrikation gründlich untersucht werden bevor mit der Realisierung begonnen wird. Dadurch können eventuell erfolglose Einführungsversuche vermieden und vergeblich aufgewendete Ressourcen reduziert werden. Der iterative Prozess wurde in einen 5-stufigen Modell zur Einführung von Refabrikation (5AFIR) zusammengefasst. Återtillverkning är en industriell process där en stomme – en använd, uttjänt eller trasig produkt – omformas till en produkt vars specifikation och kvalitet motsvarar nyskick. Idag utgör återtillverkning endast en liten del av den totala tillverkningsindustrin. Det finns flera typer av återtillverkare; den ovanligaste är originaltillverkande återtillverkare, det vill säga, ett tillverkande företag som även återtillverkar sina egna produkter. Genom den låga grad av återtillverkning bland originaltillverkare idag finns det utrymme för att verka för en ökning. En sådan ökning kan bidra till miljömässiga fördelar genom att mängden råmaterial och energi reduceras jämfört med nytillverkning. Det finns därför en möjlighet för återtillverkning att bidra till en frikoppling av miljömässig påverkan från ekonomisk tillväxt, vilket i sin tur bidrar till ett mer hållbart samhälle. Fast att endast värdera nyttan av återtillverkning leder inte direkt till en tillväxt inom återtillverkningsindustrin. För att omfamna de miljömässiga, sociala och ekonomiska nyttor som återtillverkning kan bidra med måste originaltillverkare vara medvetna om hur återtillverkning kan initieras och implementeras i praktiken på ett ekonomiskt lönsamt sätt. Denna doktorsavhandlings syfte är därför att utveckla stöd för originaltillverkare att initiera lönsam återtillverkning. Forskningen utgår från en fallstudie och transdisciplinär forskningsmetodik där initieringen av lönsam återtillverkning studeras vid två originaltillverkare. Den utförda forskningen utvecklade kunskap om hur återtillverkning kan integrerats i en originaltillverkares befintliga verksamhet. Parallellt med detta utvecklades ekonomiska utvärderingsmetoder för att tillhandahålla ett mått på hur väl fallföretagen skulle kunna utföra återtillverkning. För fallstudien utvecklades det sju återtillverkningsscenarion som sträcker sig från centraliserad återtillverkning, som utförs av originaltillverkaren, till decentraliserad, som utförs vid flertalet platser inom ett återförsäljarnätverk. Vilket scenario som var mest fördelaktigt berodde exempelvis på riskmedvetenhet, samarbete mellan aktörer, och tillverkningsvolym. Men givet ideala förhållanden visades det att centraliserad återtillverkning vore potentiellt mest fördelaktigt för fallföretaget, eftersom färre mellanhänder och stordriftsfördelar möjliggör lägre kostnader. För det andra fallföretagets initieringen av återtillverkning vid tillämpning av den transdisciplinära forskningsmetodiken var det ett affärsmodellsfokus, vilket innebar att återtillverkningssystemet var en konsekvens av ett beslut för en viss affärsmodell. I denna del av forskningen utvecklades en scenariobaserad analysmetod för att förstå under vilka förhållanden som affärsmodellen tillsammans med återtillverkning vore mer lukrativt för företaget – originaltillverkaren – och mindre kostsamt för användaren – kunden. För detta utvecklades en systematisk ansats för ekonomiska utvärderingar bestående av tre steg: (1) tillhandahåll en kostnadsöverblick för varje affärsmodell, (2) skapa scenarion genom att modifiera kostnadsdrivarna, och (3) kombinera scenarion för att uppnå synergieffekter. Med utgångspunkt i fallstudien utvecklades även faktorer för att forma krav för hur originaltillverkare kan initiera återtillverkning. Dessa faktorer delas upp i grundläggande och stödjande kravställningar, och de bygger tillsammans upp ett ramverk benämnt Återtillverkningsraketen. De grundläggande kravställningarna lyfter fram elementära krav vid utförandet av återtillverkning och om en av de fyra skulle saknas kan återtillverkning inte utföras på ett framgångsrikt sätt. De stödjande kravställningarna är av värde för att förbättra återtillverkningseffektiviteten genom exempelvis bekymmersfritt utförande av processer, organisationsförändringar, eller informationsutbyten. Därigenom, för att nå den fulla potentialen av återtillverkning, behövs både de grundläggande och de stödjande kravställningarna. Dessutom utforskades området för ekonomiska utvärderingsmetoder i en systematisk litteraturgenomgång för att identifiera insikter för att utveckla sådana metoder skräddarsydda för individuella originaltillverkare som initierar återtillverkning. För ändamålet föreslås sex perspektiv för att forma ekonomiska utvärderingsmetoder. Dessa täcker såväl systemgränserna för utvärderingarna som individuella behov och visioner hos originaltillverkare. För att vidare stödja företagen utvecklades ett ramverk för att välja ekonomiska utvärderingsmetoder för initieringar av återtillverkning baserat på användarvänlighet och förmåga att hantera komplexa datamängder. Slutligen föreslås det att tillämpa de framtagna kravställningarna tillsammans med ekonomisk utvärdering genom att iterativt undersöka möjligheterna för hur återtillverkning kan initieras för originaltillverkare. De grundläggande kravställningarna influerar upplägget för den första iterationen av den ekonomiska utvärderingen, vilken i sin tur nyttjas för att förfina hur de grundläggande kravställningarna kan läggas samman på ett ekonomiskt fördelaktigt sätt. När en godtagbar nivå uppnåtts kan ytterligare en iterativ process utföras mellan de stödjande kravställningarna och den ekonomiska värderingen. Genom att tillämpa det föreslagna tillvägagångssättet kan möjligheterna för återtillverkning undersökas på en detaljerad nivå innan initieringsförsök i praktiken, och såldes kan mängden slösade resurser minskas. Utöver detta integrerades det iterativa tillvägagångssättet med en 5-stegsansats för initiering av återtillverkning (5AFIR).

Download or read book Sustainability in Remanufacturing Operations written by Paulina Golinska-Dawson and published by Springer. This book was released on 2017-07-14 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present customers’ consumption models result in an increasing number of used products that need to be collected and reused or disposed. Remanufacturing is a favourable scenario in order to recover the end-of-use products. It allows to capture substantial part of the resources which were used in the primary production at lower cost, providing economic, environmental and social benefits. The book presents the methods, models, case studies for improvement of sustainability in remanufacturing facilities. The focus is on small- and medium-sized enterprises and their challenges to meet resource-efficiency goal.

Download or read book Remanufactured Fashion written by Pammi Sinha and published by Springer. This book was released on 2016-01-14 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the concept and applications of Remanufactured Fashion. The first book on this subject, it covers reverse logistics, exemplars, and case studies of remanufactured fashion design. Textile waste is a major issue for all countries, and converting that waste into useful products offers a sensible solution. Remanufactured Fashion is one such sustainable waste management strategy. It involves the conversion of discarded garments into useful retail products, without which they would be dumped at landfills, posing a number of environmental issues. Remanufacturing recovers a product’s inherent value once that product no longer fulfills the user’s desired needs. The application and use of discarded clothing in remanufacturing processes could greatly reduce the percentage of clothing waste (and mitigate related waste management issues), while also contributing to resource conservation. There has been scant research investigating what is actually involved in the fashion remanufacturing process and how the process could be up-scaled to the mass market in order to achieve greater environmental gains. This book addresses that gap in the literature and examines all aspects pertaining to the concept and applications of Remanufactured Fashion.

Download or read book Designing for the Circular Economy written by Martin Charter and published by Routledge. This book was released on 2018-08-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The circular economy describes a world in which reuse through repair, reconditioning and refurbishment is the prevailing social and economic model. The business opportunities are huge but developing product and service offerings and achieving competitive advantage means rethinking your business model from early creativity and design processes, through marketing and communication to pricing and supply. Designing for the Circular Economy highlights and explores ‘state of the art’ research and industrial practice, highlighting CE as a source of: new business opportunities; radical business change; disruptive innovation; social change; and new consumer attitudes. The thirty-four chapters provide a comprehensive overview of issues related to product circularity from policy through to design and development. Chapters are designed to be easy to digest and include numerous examples. An important feature of the book is the case studies section that covers a diverse range of topics related to CE, business models and design and development in sectors ranging from construction to retail, clothing, technology and manufacturing. Designing for the Circular Economy will inform and educate any companies seeking to move their business models towards these emerging models of sustainability; organizations already working in the circular economy can benchmark their current activities and draw inspiration from new applications and an understanding of the changing social and political context. This book will appeal to both academia and business with an interest in CE issues related to products, innovation and new business models.

Download or read book Remanufacturing in the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic growth and rising levels of consumption in developing and developed countries has been observed as being deeply coupled with natural resource usage and material consumption. The increasing need for natural resources has raised concerns regarding issues such as resource scarcity, undesirable environmental impacts due to material extraction, primary production, and suboptimal product disposal, and social or political tensions. Product End-of-Life (EoL) options, such as reusing or recycling, attempt to limit or reduce the amount of waste sent to a landfill, providing strategic means to decouple the link between economic growth and resource usage. These EoL options have the potential to close material loops, further utilizing wastes as resources, reducing environmental impacts, conserving natural resources, reducing material prices, and providing job opportunities in developing countries. Remanufacturing, on the other hand, is a unique EoL option due to increasing the number of life cycles of a product before final disposal. First, recurring environmental benefits, such as emission and raw material extraction avoidance are obtained with each additional product life cycle. Second, individual resource efficiency yields increase through product remanufacture. Resource efficiency or, using more with less will continue to compound with each additional life cycle. Third, recirculating products decreases the demand and dependency for primary resource production, further closing the material loop and creating a more circular economy. In addition, remanufacturing can initiate more preferable EoL options such as recovery, recycling, and waste reduction. While remanufacturing offers numerous benefits, there is significant lack of literature and books covering the fundamentals of operations, technologies and business models. The proposed book will provide in-depth coverage of remanufacturing fundamentals and its strong link to circular economy and resource efficiency.