Download or read book Producing Synthetic Crude Oil from Heavy Oils written by Jorge Ancheyta Juárez and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spills of Diluted Bitumen from Pipelines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-03-22 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diluted bitumen has been transported by pipeline in the United States for more than 40 years, with the amount increasing recently as a result of improved extraction technologies and resulting increases in production and exportation of Canadian diluted bitumen. The increased importation of Canadian diluted bitumen to the United States has strained the existing pipeline capacity and contributed to the expansion of pipeline mileage over the past 5 years. Although rising North American crude oil production has resulted in greater transport of crude oil by rail or tanker, oil pipelines continue to deliver the vast majority of crude oil supplies to U.S. refineries. Spills of Diluted Bitumen from Pipelines examines the current state of knowledge and identifies the relevant properties and characteristics of the transport, fate, and effects of diluted bitumen and commonly transported crude oils when spilled in the environment. This report assesses whether the differences between properties of diluted bitumen and those of other commonly transported crude oils warrant modifications to the regulations governing spill response plans and cleanup. Given the nature of pipeline operations, response planning, and the oil industry, the recommendations outlined in this study are broadly applicable to other modes of transportation as well.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heavy Crude Oils written by Alain-Yves Huc and published by Editions TECHNIP. This book was released on 2011 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy oils, extra-heavy oils and tar sands are major players for the future of energy.They represent a massive world resource, at least the size of conventional oils. They are found all over the world but Canada and Venezuela together account, by themselves, for more than half of world deposits. They share the same origin as the lighter conventional oils, but their geological fate drove them into thick, viscous tar-like crude oils. Most of them result from alteration processes mediated by microbial degradation. They are characterized by a low content of lighter cuts and a high content of impurities such as sulfur and nitrogen compounds and metals ; so, their production is difficult and deployment of specific processes is required in order to enhance their transportability and to upgrade them into valuable products meeting market needs, and honouring environmental requirements.Although these resources are increasingly becoming commercially producible, less than 1% of total heavy crude oil deposits worldwide are under active development. The voluntarily wide scope of this volume encompasses geology, production, transportation, upgrading, economics and environmental issues of heavy oils. It does not pretend to be exhaustive, but to provide an authoritative view of this very important energy resource.
Download or read book World Production of Synthetic Fuels written by David Isaak and published by . This book was released on 1983 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Economic Evaluation of Producing a Synthetic Crude Oil from an Organic rich Brine Located in Southwestern Wyoming written by Jeannette Nielsen and published by . This book was released on 1983 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heavy and Extra heavy Oil Upgrading Technologies written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2013-04-12 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional reservoirs of oil and gas represent a huge additional global source of fossil fuels. However, there is much still to be done to improve techniques for their processing to make recovery and refining of these particular energy sources more cost-effective. Brief but readable, Heavy and Extra-heavy Oil Upgrading Technologies provide readers with a strategy for future production (the up-stream) and upgrading (the down-stream). The book provides the reader with an understandable overview of the chemistry and engineering behind the latest developments and technologies in the industry as well as the various environmental regulations.Clear and rigorous, Heavy and Extra-heavy Oil Upgrading Technologies will prove tool for those scientists and engineers already engaged in fossil fuel science and technology as well as scientists, non-scientists, engineers, and non-engineers who wish to gain a general overview or update of the science and technology of unconventional fossil fuels in general and upgrading technologies in particular. The use of microorganisms and a number of physical methods, such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics, etc., will be discussed for the first time. Overview of the chemistry, engineering, and technology of oil sands Microorganisms and a number of physical methods such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics Evolving and new environmental regulations regarding oil sands production processes
Download or read book New Sources of Oil and Gas written by S. S. Penner and published by Elsevier. This book was released on 2013-10-22 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Sources of Oil & Gas: Gases from Coal, Liquid Fuels from Coal, Shale Tar Sands, and Heavy Oil Sources is a collection of papers that covers various concerns in exploiting alternative sources of oil and gas. The book first covers the essential features of developing coal-gasification and coal-liquefaction technologies, and then proceeds to discussing the results of a detailed evaluation of technologies for shale-oil recovery. The last article discusses the assessment of research areas that affect the prospects for oil recovery from oil sources and tar sands. The book will be of great use to researchers and practitioners of disciplines involved in the fuel industry.
Download or read book Processes for the Production of Synthetic Crude Oils by Liquefaction of Oil Shale and Coal written by Donald L. Klass and published by . This book was released on with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Fuels written by Ronald F. Probstein and published by Courier Corporation. This book was released on 2013-04-15 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the outgrowth of a graduate course the authors taught at the Massachusetts Institute of Technology, was designed to fill an urgent need—the training of engineers in the production of synthetic fuels to replace dwindling supplies of natural ones. The authors presented synthetic fuels as a unified engineering subject, while recognizing that many of its principles are well-understood aspects of various engineering fields. The presentation begins with a review of chemical and physical fundamentals and conversion fundamentals, and proceeds to coal gasification and gas upgrading. Subsequent chapters examine liquids and clean solids produced from coal, liquids obtained from oil shale and tar sands, biomass conversion, and environmental, economic, and related aspects of synthetic fuel use. The text is directed toward beginning graduate students and advanced undergraduates in chemical and mechanical engineering, but should also appeal to students from other disciplines, including environmental, mining, petroleum, and industrial engineering, as well as chemistry. It also serves as a reference and guide for professionals.
Download or read book Crude Oil Emulsions written by Manar Abdel-Raouf and published by BoD – Books on Demand. This book was released on 2012-03-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum "black gold" is the most important nonrenewable source of energy. It is a complex mixture of different phases and components. Refining it provides a vast number of organic compounds, all of them of which are used to produce petroleum based products for numerous applications, from industry to medicine, from clothing to food industries. We can find petroleum based products all around us. This book deals with some important topics related to petroleum such as its chemical composition and stability. It is well-known that the chemical composition of crude oil differs according to the site of production, and its grade varies from waxy to asphaltenic crude. Both of them are refined to produce different products. The stability of crude oil on aging and transportation is governed by several factors and these factors are included within this book. Some new technologies for petroleum characterization are also introduced. This book is aimed at researchers, chemical engineers and people working within the petroleum industry.
Download or read book Modeling of Processes and Reactors for Upgrading of Heavy Petroleum written by Jorge Ancheyta and published by CRC Press. This book was released on 2013-01-29 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The worldwide petroleum industry is facing a dilemma: the production level of heavy petroleum is higher than that of light petroleum. Heavy crude oils possess high amounts of impurities (sulfur, nitrogen, metals, and asphaltenes), as well as a high yield of residue with consequent low production of valuable distillates (gasoline and diesel). These
Download or read book Unconventional Resources written by Jose E. Chavez and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Organic Chemicals written by and published by . This book was released on 1975 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil Shale and Tar Sands written by John Ward Smith and published by . This book was released on 1976 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing of Heavy Crude Oils written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Refinery of the Future written by James G. Speight and published by William Andrew. This book was released on 2010-12-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: As feedstocks to refineries change, there must be an accompanying change in refinery technology. This means a movement from conventional means of refining heavy feedstocks using (typically) coking technologies to more innovative processes that will coax the last drips of liquid fuels from the feedstock. This book presents the evolution of refinery processes during the last century and as well as the means by which refinery processes will evolve during the next three-to-five decades. Chapters contain material relevant to (1) comparisons of current feedstocks with heavy oil and bio-feedstocks; (2) evolution of refineries since the 1950s, (3) properties and refinability of heavy oil and bio-feedstocks, (4) thermal processes vs. hydroprocesses, and (5) evolution of products to match the environmental market. Process innovations that have influenced refinery processing over the past three decades are presented, as well as the relevant patents that have the potential for incorporation into future refineries.• Comparison of current feedstocks with heavy oil and bio-feedstocks. • Evolution of refineries over the past three decades. • Properties and refinability of heavy oil and bio-feedstocks. • Thermal processes vs. Hydroprocesses. • Evolution of products to match the environmental market. Investigates the engineering and plant design challenges presented by heavy oil and bio-feedstocks Explores the legislatory and regulatory climate, including increasingly stringent environmental requirements Examines the trade-offs of thermal processes vs. hydroprocesses
