Download or read book Advancements in Biomass Feedstock Preprocessing Conversion Ready Feedstocks written by J. Richard Hess and published by Frontiers Media SA. This book was released on 2020-03-12 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The success of lignocellulosic biofuels and biochemical industries depends upon an economic and reliable supply of quality biomass. However, research and development efforts have historically focused on the utilization of agriculturally-derived, cellulosic feedstocks without consideration of their low energy density, high variations in physical and chemical characteristics and potential supply risks in terms of availability and affordability. This Research Topic will explore strategies that enable supply chain improvements in biomass quality and consistency through blending, preprocessing, diversity and landscape design for development of conversion-ready, lignocellulosic feedstocks for production of biofuels and bio-products. Biomass variability has proven a formidable challenge to the emerging biorefining industry, impeding continuous operation and reducing yields required for economical production of lignocellulosic biofuels at scale. Conventional supply systems lack the preprocessing capabilities necessary to ensure consistent biomass feedstocks with physical and chemical properties that are compatible with supply chain operations and conversion processes. Direct coupling of conventional feedstock supply systems with sophisticated conversion systems has reduced the operability of biorefining processes to less than 50%. As the bioeconomy grows, the inherent variability of biomass resources cannot be managed by passive means alone. As such, there is a need to fully recognize the magnitude of biomass variability and uncertainty, as well as the cost of failing to design feedstock supply systems that can mitigate biomass variability and uncertainty. A paradigm shift is needed, from biorefinery designs using raw, single-resource biomass, to advanced feedstock supply systems that harness diverse biomass resources to enable supply chain resilience and development of conversion-ready feedstocks. Blending and preprocessing (e.g., drying, sorting, sizing, fractionation, leaching, densification, etc.) can mitigate variable quality and performance in diverse resources when integrated with downstream conversion systems. Decoupling feedstock supply from biorefining provides an opportunity to manage supply risks and incorporate value-added upgrading to develop feedstocks with improved convertibility and/ or market fungibility. Conversion-ready feedstocks have undergone the required preprocessing to ensure compatibility with conversion and utilization prior to delivery at the biorefinery and represent lignocellulosic biomass with physical and chemical properties that are tailored to meet the requirements of industrially-relevant handling and conversion systems.

Download or read book Analytical Methods for Biomass Characterization and Conversion written by David C. Dayton and published by Elsevier. This book was released on 2019-11-05 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Methods for Biomass Characterization and Conversion is a thorough resource for researchers, students and professors who investigate the use of biomass for fuels, chemicals and products. Advanced analytical chemistry methods and techniques can now provide detailed compositional and chemical measurements of biomass, biomass conversion process streams, intermediates and products. This volume from the Emerging Issues in Analytical Chemistry series brings together the current knowledge on each of these methods, including spectroscopic methods (Fourier Transform Infrared Spectroscopy, Near-infrared Spectroscopy, Solid State Nuclear Magnetic Resonance), pyrolysis (Gas Chromatography/Mass Spectrometry), Liquid Chromatography/High Performance Liquid Chromatography, Liquid Chromatography/Mass Spectrometry, and so on. Authors David C. Dayton and Thomas D. Foust show how these can be used for measuring biomass composition and for determining the composition of intermediates with regard to subsequent processing for biofuels, bio-chemicals and bio-based products. - Covers the broad range of techniques and applications that have been developed and perfected in the last decade - Highlights specific analyses required for understanding biomass conversion to select intermediates - Provides references to seminal books, review articles and technical articles that go into greater depth, serving as a basis for further study

Download or read book ForestryBased Biomass Economic and Financial Information and Tools An Annotated Bibliography written by and published by DIANE Publishing. This book was released on with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advancements in Biomass Feedstock Preprocessing Conversion Ready Feedstocks Volume II written by Timothy G. Rials and published by Frontiers Media SA. This book was released on 2022-11-11 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Woody Biomass for Bioenergy Production written by Jaya Shankar Tumuluru and published by MDPI. This book was released on 2021-03-05 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Woody biomass is most widely used for energy production. In the United States, roughly 2% of the energy consumed annually is generated from wood and wood-derived fuels. Woody biomass needs to be preprocessed and pretreated before it is used for energy production. Preprocessing and pretreatments improve the physical, chemical, and rheological properties, making them more suitable for feeding, handling, storage transportation, and conversion. Mechanical preprocessing technologies such as size reduction and densification, help improve particle size distribution and density. Thermal pretreatment can reduce grinding energy and torrefied ground biomass has improved sphericity, particle surface area, and particle size distribution. This book focuses on several specific topics, such as understanding how forest biomass for biofuels impacts greenhouse gas emissions; mechanical preprocessing, such as densification of forest residue biomass, to improve physical properties such as size, shape, and density; the impact of thermal pretreatment temperatures on woody biomass chemical composition, physical properties, and microstructure for thermochemical conversions such as pyrolysis and gasification; the grindability of torrefied pellets; use of wood for gasification and as a filter for tar removal; and understanding the pyrolysis kinetics of biomass using thermogravimetric analyzers.

Download or read book Biofuels written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuel is a renewable energy source produced from natural materials. The benefits of biofuels over traditional petroleum fuels include greater energy security, reduced environmental impact, foreign exchange savings, and socioeconomic issues related to the rural sector. The most common biofuels are produced from classic food crops that require high-quality agricultural land for growth. However, bioethanol can be produced from plentiful, domestic, cellulosic biomass resources such as herbaceous and woody plants, agricultural and forestry residues, and a large portion of municipal and industrial solid waste streams. There is also a growing interest in the use of vegetable oils for making biodiesel. “Biofuels: Securing the Planet’s Future Energy Needs” discusses the production of transportation fuels from biomass (such as wood, straw and even household waste) by Fischer-Tropsch synthesis. The book is an important text for students and researchers in energy engineering, as well as professional fuel engineers.

Download or read book Engineering and Science of Biomass Feedstock Production and Provision written by Yogendra Shastri and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomass based energy sector, especially the one based on lignocellulosic sources such as switchgrass Miscanthus, forest residues and short rotation coppice, will play an important role in our drive towards renewable energy. The biomass feedstock production (BFP) subsystem provides the necessary material inputs to the conversion processes for energy production. This subsystem includes the agronomic production of energy crops and the physical handling and delivery of biomass, as well as other enabling logistics. Achieving a sustainable BFP system is therefore paramount for the success of the emerging bioenergy sector. However, low bulk and energy densities, seasonal and weather sensitive availability, distributed supply and lack of commercial scale production experience create unique challenges. Moreover, novel region specific feedstock alternatives continue to emerge. Engineering will play a critical role in addressing these challenges and ensuring the techno-economic feasibility of this sector. It must also integrate with the biological, physical and chemical sciences and incorporate externalities, such as social/economic considerations, environmental impact and policy/regulatory issues, to achieve a truly sustainable system. Tremendous progress has been made in the past few years while new challenges have simultaneously emerged that need further investigation. It is therefore prudent at this time to review the current status and capture the future challenges through a comprehensive book. This work will serve as an authoritative treatise on the topic that can help researchers, educators and students interested in the field of biomass feedstock production, with particular interest in the engineering aspects.​ ​

Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-08-09 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource.Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. - Covers all renewable energy technologies in one comprehensive resource - Details renewable energies' processes, from production to utilization in a single encyclopedia - Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field - Assesses economic challenges faced to implement each type of renewable energy - Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy

Download or read book Fundamentals of Biofuel Production Processes written by Debabrata Das and published by CRC Press. This book was released on 2019-04-16 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamentals of biofuel production from renewable energy sources and biohydrogen production, this book offers a complete understanding of the bioconversion processes. Each chapter begins with a fundamental explanation for general readers and ends with in-depth scientific details suitable for expert readers. It discusses different types of production technologies covering basic concepts, production strategies, commercial usage, and advances.

Download or read book Biomass Preprocessing and Pretreatments for Production of Biofuels written by Jaya Shankar Tumuluru and published by CRC Press. This book was released on 2018-07-26 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering the physical, chemical, and energy properties of lignocellulosic biomass is important to produce high-quality consistent feedstocks with reduced variability for biofuels production. The emphasis of this book will be the beneficial impacts that mechanical, chemical, and thermal preprocessing methods can have on lignocellulosic biomass quality attributes or specifications for solid and liquid biofuels and biopower production technologies. "Preprocessing" refers to treatments that can occur at a distance from conversion and result in an intermediate with added value, with improved conversion performance and efficiency. This book explores the effects of mechanical, chemical, and thermal preprocessing methods on lignocellulosic biomass physical properties and chemical composition and their suitability for biofuels production. For example, biomass mechanical preprocessing methods like size reduction (which impacts the particle size and distribution) and densification (density and size and shape) are important for feedstocks to meet the quality requirements for both biochemical and thermochemical conversion methods like enzymatic conversion, gasification, and pyrolysis process. Thermal preprocessing methods like drying, deep drying, torrefaction, steam explosion, hydrothermal carbonization, and hydrothermal liquefaction effect feedstock's proximate, ultimate and energy property, making biomass suitable for both solid and liquid fuel production. Chemical preprocessing which includes washing, leaching, acid, alkali, and ammonia fiber explosion that can enable biochemical composition, such as modification of lignin and hemicellulose, and impacts the enzymatic conversion application for liquid fuels production. This book also explores the integration of these preprocessing technologies to achieve desired lignocellulosic biomass quality attributes for biofuels production.

Download or read book Biomass Feedstocks for Biopower written by Kelsi Bracmort and published by DIANE Publishing. This book was released on 2011 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a print on demand edition of a hard to find publication. Biopower -- a form of renewable energy -- is the generation of electric power from biomass feedstocks. Biopower, which comprised about 1% of electricity generation in 2008, may reduce greenhouse gas emissions, provide energy security, and promote economic development. A large range of feedstocks can be used, from woody and herbaceous biomass to agricultural residues. Each feedstock has technical and economic advantages and challenges compared to fossil fuels. Contents of this report: Intro.; What Kind of Biomass is Available for Biopower?; From Biomass to Biopower; Carbon Balance; Implications for Legislation; Conclusion; Appendices: Biomass Feedstock Characteristics for Biopower Generation; Biopower R&D Authorizations. Illustrations.

Download or read book Renewable Energy from Forest Resources in the United States written by Barry Solomon and published by Routledge. This book was released on 2008-10-30 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in biomass energy resources from forests, farms and other sources has been rapidly increasing in recent years because of growing concern with reducing carbon dioxide emissions and developing alternatives to increasingly scarce, expensive and insecure oil supplies. The uniqueness of this book is its coverage of biomass energy markets in the US from an economic as well as technical perspective. Existing books typically focus on single markets or technical aspects at the exclusion of economics, and have given greater coverage to biomass energy outside the US. This edited collection has three main parts. Part One provides a historical overview of forest biomass energy use in the US; the major technologies, economics, market prospects, and policies. Part Two presents forest biomass energy assessments, including life cycle and sustainability perspectives, and Part Three includes five sets of regional case studies. After reviewing the history of wood energy use in the US and technology options, the book shows that forests could displace sixteen per cent of domestic transportation fuel use in 2030. Renewable Energy from Forest Resources in the United States includes a Foreword from Chris Flavin, President of the Worldwatch Institute.

Download or read book Biomass Utilization written by Wilfred Cote and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume represents the culmination of nearly three years of planning, organizing and carrying out of a NATO Ad vanced Study Institute on Biomass Utilization. The effort was initi ated by Dr. Harry Sobel, then Editor of Biosources Digest, and a steering committee representing the many disciplines that this field brings together. . When the fiscal and logistical details of the original plan could not be worked out, the idea was temporarily suspended. In the spring of 1982, the Renewable Materials Institute of the State University of New York at the College of Environmental Science and Forestry in Syracuse, New York revived the plan. A number of modifications had to be made, including the venue which was changed from the U.S.A. to Portugal. Additional funding beyond the basic support provided by the Scientific Affairs Division of NATO had to be obtained. Ul timately there were supplementary grants from the Foundation for Microbiology and the Anne S. Richardson Fund to assist student participants. The New York State College of Forestry Foundation, Inc. provided major support through the Renewable Ma terials Institute. The ASI was held in Alcabideche, Portugal from September 26 to October 9, 1982. Eighty participants including fifteen principal lecturers were assembled at the Hotel Sintra Estoril for the program that was organized as a comprehensive course on biomass utilization. The main lectures were supplemented by relevant short papers offered by the participants.

Download or read book Biorefinery of Oil Producing Plants for Value Added Products written by Suraini Abd-Aziz and published by John Wiley & Sons. This book was released on 2021-12-21 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biorefinery of Oil Producing Plants for Value-Added Products An instructive and up-to-date pretreatment and industrial applications of oil producing plants Biorefinery of Oil Producing Plants for Value-Added Products is a two-volume set that delivers a comprehensive exploration of oil producing plants, from their availability to their pretreatment, bioenergy generation, chemical generation, bioproduct generation, and economic impact. The distinguished team of editors has included a wide variety of highly instructive resources written by leading contributors to the field. This set explores the current and future potential of bioenergy production to address the energy and climate crisis, as well as the technologies used to produce materials like biogas, biodiesel, bioethanol, biobutanol, biochar, fuel pellets, and biohydrogen. It also discusses the production of biobased chemicals, including bio-oil, biosurfactants, catanionic surfactants, glycerol, biovanillin, bioplastic, and plant-oil based polyurethanes. Concluding with an insightful analysis of the economic effects of oil producing plants, the set also offers readers: A thorough introduction to the availability of oil producing plants, including palm oil, castor oil, jatropha, nyamplung, and coconut A comprehensive exploration of the pretreatment of oil producing plants, including the physical, chemical and biological pretreatment of lignocellulosic biomass Practical discussion of the generation of bioenergy, including biogas generation in the palm oil mill and biodiesel production techniques using jatropha In-depth examinations of the generation of biobased chemicals, including those produced from the tobacco plant Perfect for researchers and industry practitioners involved with the biorefinery of oil producing plants, Biorefinery of Oil Producing Plants for Value-Added Products also belongs in the libraries of undergraduate and graduate students studying agriculture, chemistry, engineering, and microbiology.

Download or read book Increasing Feedstock Production for Biofuels written by Gale Buchanan and published by DIANE Publishing. This book was released on 2010-10 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large expansion in ethanol production, along with research and innovation to develop second-generation biofuels, is underway in the U.S., spurred by volatile oil prices and energy policies. This increased focus on ethanol and other biofuels is an important element of U.S. economic, energy, environmental, and national security policies. This report will inform research recommendations to address the constraints surrounding availability of biomass feedstocks. To meet this goal, an economic assessment, which links to an analysis of the consequences for greenhouse gas emissions and sustainability, has been developed that encompasses feedstock production from agriculture and forestry sources. Illustrations.

Download or read book A Development Perspective For Biomass Fuelled Electricity Generation Technologies written by Roland Vincent Siemons and published by Clean Fuels b.v.. This book was released on 2002 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering for Renewables Conversion written by and published by Academic Press. This book was released on 2012-12-28 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass has received considerable attention as a sustainable feedstock that can replace diminishing fossil fuels for the production of energy and chemicals. At the present moment in the oil refining, petrochemical and chemical industry, after fractionation of crude oil, various fractions are upgraded either to fuels or functionalized to produce intermediates and specialty chemicals. An analogous concept of biorefining is based on the utilization of biomass as a renewable source of carbon, which could be transformed to valuable chemicals. Although various aspects of biomass transformations are frequently discussed in the literature, chemical engineering aspects of such transformations are commonly not considered. The aim of the present book is to fill this void. - Updates and informs the reader on the latest research findings using original reviews - Written by leading industry experts and scholars - Reviews and analyzes developments in the field