Download or read book Processing and Properties of High Speed Tool Steels written by M. G. H. Wells and published by . This book was released on 1980 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: On-demand operators have more risk in their operating environments and receive less oversight from FAA. For example, one on-demand operator we visited flew dozens of flights daily during the summer to take tourists to glaciers on which the aircraft landed and took off on skis. This operator flies 17 aircraft and was inspected 8 times by FAA in 2008. In contrast, a Part 121 operator with 10 aircraft, overseen by the same FAA oversight office, received 199 inspections in 2008. Industry and the National Transportation Safety Board (NTSB) have made recommendations to strengthen on-demand regulations. While FAA has made efforts to improve safety and adapt its oversight to the increased complexity of industry operations, it has not taken substantive action to address these recommendations. Further, FAA does not effectively target inspections to higher-risk on-demand operators. The number of fatalities from on-demand operations makes it imperative that FAA take action to address three issues we identified as it plans regulatory and oversight changes for the growing on-demand operator industry.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.
Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.
Download or read book High speed Steel written by Otto Matthew Becker and published by Рипол Классик. This book was released on 1910 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Download or read book High Speed Steels written by G. Hoyle and published by Butterworth-Heinemann. This book was released on 1988 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool Steels 5th Edition written by George Adam Roberts and published by ASM International. This book was released on 1998 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Steel The Development Nature Treatment and Use of High Speed Steels Together with Some Suggestions as to the Problems Involved in Their Use written by O. M. Becker and published by . This book was released on 2016-05-19 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vintage book contains a detailed treatise on high-speed steel, including information on its properties, uses, and development, together with hints and tips concerning common problems. Profusely illustrated with useful tables, charts, and diagrams, this volume is highly recommended for those with an interest in steel manufacturing and metal work. Contents include: "The Development and Nature of High-Speed Steels," "Early Tool Steels," "Self-Hardening and High-Speed Steel," "Forging the Tools," "Hardening - The High Treatment Practically Applied," "Hardening - The Barium Chloride Process," "Tempering," "Annealing," "Grinding," et cetera. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metal work. First published in 1910.
Download or read book The Tool Steel Guide written by James A. Szumera and published by Industrial Press Inc.. This book was released on 2003 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: For tool designers, tool and die makers, machinists, and apprentices, Szumera presents specification, heat treatments, applications for all types of die and mold steels, and suggestions on how to prepare steels for machining and heat treatment. He does not provide a bibliography. Annotation (c) Boo
Download or read book Carbon and Alloy Tool Steels written by Ludlum Steel Company and published by . This book was released on 1918 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Heat Treatment of Tool Steel written by Harry Brearley and published by . This book was released on 1911 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Carbon and Alloy Tool Steels written by Ludlum Steel Company and published by . This book was released on 1924 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Steel written by Crucible Steel Company of America and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the development and properties of high speed steel, a type of tool steel used in machining and cutting applications. It includes information on the history of high speed steel, its different types and grades, and its manufacturing processes. This book is essential for professionals in the tool and die industry, as well as students in engineering and materials science. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book The Metallurgy of Tool Steels written by Peter Payson and published by . This book was released on 1962 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.
Download or read book Heat Treatment and Properties of Iron and Steel written by Samuel Jacob Rosenberg and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed and Carbon Tool Steels written by Anon and published by Read Books Ltd. This book was released on 2017-08-25 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vintage book contains a detailed treatise on high-speed and carbon tool steels. "High-Speed and Carbon Tool Steels" is highly recommended for those with an interest in the state of the steel manufacturing industry in America at the beginning of the twentieth century. It also contains information that will be of utility to modern metal workers and would make for a valuable addition to collections of related literature. Contents include: "Tool Steel for the Unites States Navy", "Relation of Price of Tool Steel to Manufacturing Costs", "The Influence of Heat on Hardened Tool Steels", "Development and Use of High-speed Steel", and "Hardening and Tempering of Steel". Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metal work. Originally published in 1914.
