Download or read book Process Steam Systems A Practical Guide for Operators Maintainers Designers and Educators written by Carey Merritt and published by John Wiley & Sons. This book was released on 2022-11-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible handbook for process steam systems The revised second edition of Process Steam Systems: A Practical Guide for Operators, Maintainers, Designers, and Educators delivers a practical guide to ensuring steam systems are properly and efficiently designed, operated, and maintained. The book provides comprehensive information designed to improve process steam system knowledge, reliability, and integration into current manufacturing processes. The most up-to-date version of this volume includes brand-new coverage of current codes, sustainability measures, and updated applications. Heat transfer theory and thermodynamics are tied into practical applications with new practice problems ideal for both professionals seeking to improve their skills and engineers-in training. Readers will also find: Thorough design criteria for process steam systems, complete with detailed illustrations for piping and controls An entirely new chapter on the history of steam systems, including the evolution of the ASME code and boiler accidents Revised coverage of current NFPA, ASME, CSD-1, FM, and building codes, as well as new insurance requirements relevant to practitioners in the industry Expansive design guidance for steam system efficiency upgrades Perfect for operations and maintenance staff at manufacturing, healthcare, and commercial laundries, Process Steam Systems: A Practical Guide for Operators, Maintainers, Designers, and Educators will also earn a place in the libraries of consulting engineers and engineering students with an interest in process manufacturing.
Download or read book Process Steam Systems written by Carey Merritt and published by John Wiley & Sons. This book was released on 2015-10-12 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively describes the equipment used in process steam systems, good operational and maintenance practices, and techniques used to troubleshoot system problems Explains how an entire steam system should be properly designed, operated and maintained Includes chapters on commissioning and troubleshooting various process systems and problems Presents basic thermodynamics and heat transfer principles as they apply to good process steam system design Covers Steam System Efficiency Upgrades; useful for operations and maintenance personnel responsible for modifying their systems
Download or read book Industrial Steam Systems written by Mojtaba Sabet and published by CRC Press. This book was released on 2015-09-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a Complete and Thorough Understanding of Industrial Steam Systems Industrial Steam Systems: Fundamentals and Best Design Practices is a complete, concise user's guide for plant designers, operators, and other industry professionals involved with such systems. Focused on the proper safety design and setup of industrial steam systems, this text aligns essential principles with applicable regulations and codes. Incorporating design and operation guidelines from the latest available literature, it describes the industrial steam system equipment and its operation, outlines the requirements of a functioning boiler room, and explains how to design and engineer an industrial steam system properly. From Beginner to Advanced—All within a Single Volume Industrial steam systems are one of the main utility support systems used for almost all manufacturing. This text describes the design and operation of industrial steam systems in simple steps that are extremely beneficial for engineers, architects, and operators. The book help readers with the information needed for the steam systems professional engineering test and boiler operator’s certificate. The text includes a sample project, executed in detail, to explain the system. It also presents relevant examples throughout the text to aid in faster learning. This author covers: Industrial steam system fundamentals and elementary information System setup and required equipment Applicable codes and regulations Equipment operation principals Best design practices for system setup, piping and instrumentation, equipment and pipe sizing, and equipment selection Execution of a sample project Industrial Steam Systems: Fundamentals and Best Design Practices presents an overview of the design, installation, and operation of industrial steam systems. Understanding the system setup, controls, and equipment, and their effect on each other enables readers to learn how to troubleshoot, maintain, and operate an industrial steam system that provides high quality steam efficiently.
Download or read book Modeling Random Processes for Engineers and Managers written by James J. Solberg and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: By reducing mathematical detail and focusing on real-world applications, this book provides engineers with an easy-to-understand overview of stochastic modeling. An entire chapter is included on how to set up the problem, and then another complete chapter presents examples of applications before doing any math. A previously unpublished computational method for solving equations related to Markov processes is added. The book shows how to add costs or revenues to the basic probability structures without much additional effort. In addition, numerous examples are included that show how the theory can be used. Engineers will also find explanations on how to formulate word problems into the models that the math worked on.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Low Pressure Boilers Workbook written by Frederick M. Steingress and published by Amer Technical Pub. This book was released on 2008 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Workbook contains questions similar to those found on a typical boiler operator's licensing exam.
Download or read book Operator s Guide to General Purpose Steam Turbines written by Robert X. Perez and published by John Wiley & Sons. This book was released on 2016-07-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: When installed and operated properly, general purpose steam turbines are reliable and tend to be forgotten, i.e., out of sound and out of mind. But, they can be sleeping giants that can result in major headaches if ignored. Three real steam turbine undesirable consequences that immediately come to mind are: Injury and secondary damage due to an overspeed failure. An overspeed failure on a big steam or gas turbine is one of the most frightening of industrial accidents. The high cost of an extensive overhaul due to an undetected component failure. A major steam turbine repair can cost ten or more times that of a garden variety centrifugal pump repair. Costly production loses due an extended outage if the driven pump or compressor train is unspared. The value of lost production can quickly exceed repair costs. A major goal of this book is to provide readers with detailed operating procedure aimed at reducing these risks to minimal levels. Start-ups are complicated by the fact that operators must deal with numerous start-up scenarios, such as: Commissioning a newly installed steam turbine Starting ups after a major steam turbine repair Starting up a proven steam turbine after an outage Overspeed trip testing It is not enough to simply have a set of procedures in the control room for reference. To be effective, operating procedures must be clearly written down, taught, and practiced—until they become habit.
Download or read book Petroleum Register written by and published by . This book was released on 1922 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Factors Methods written by Neville Stanton and published by Ashgate Publishing, Ltd.. This book was released on 2013 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Human Factors Methods: A Practical Guide for Engineering and Design now presents 107 design and evaluation methods including numerous refinements to those that featured in the original. The book acts as an ergonomics methods manual, aiding both students and practitioners. Offering a 'how-to' text on a substantial range of ergonomics methods, the eleven sections represent the different categories of ergonomics methods and techniques that can be used in the evaluation and design process.
Download or read book Steam Plant Operation 10th Edition written by Everett B. Woodruff and published by McGraw Hill Professional. This book was released on 2016-11-04 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference on the role of steam in the production and operation of power plants for electric generation and industrial process applications For more than 80 years, Steam Plant Operation has been an unmatched source of information on steam power plants, including design, operation, and maintenance. The Tenth Edition emphasizes the importance of devising a comprehensive energy plan utilizing all economical sources of energy, including fossil fuels, nuclear power, and renewable energy sources. This trusted classic discusses the important role that steam plays in our power production and identifies the associated risks and potential problems of other energy sources. You will find concise explanations of key concepts, from fundamentals through design and operation. For energy students, Steam Plant Operation provides a solid introduction to steam power plant technology. This practical guide includes common power plant calculations such as plant heat rate, boiler efficiency, pump performance, combustion processes, and explains the systems necessary to control plant emissions. Numerous illustrations and clear presentation of the material will prove invaluable for those preparing for an operator’s license exam. Examples throughout show real-world application of the topics discussed. COVERAGE INCLUDES: • Steam and Its Importance • Boilers • Design and Construction of Boilers • Combustion of Fuels • Boiler Settings, Combustion Systems, and Auxiliary Equipment • Boiler Accessories • Operation and Maintenance of Boilers • Pumps • Steam Turbines, Condensers, and Cooling Towers • Operating and Maintaining Steam Turbines, Condensers, Cooling Towers, and Auxiliaries • Auxiliary Steam Plant Equipment • Environmental Control Systems • Waste-to-Energy Plants
Download or read book A Guide to the Evaluation of Educational Experiences in the Armed Services written by American Council on Education and published by . This book was released on 1986 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Equipment Malfunctions Techniques to Identify and Correct Plant Problems written by Norman P. Lieberman and published by McGraw Hill Professional. This book was released on 2011-12-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO TROUBLESHOOTING PROCESS EQUIPMENT MALFUNCTIONS Process Equipment Malfunctions offers proven techniques for finding and fixing process plant problems and contains details on failure identification. Diagnostic tips, examples, and illustrations help to pinpoint and correct faults in chemical process and petroleum refining equipment. Complex math has been omitted. An essential resource for plant operators and process engineers, this book is based on the author's long career in field troubleshooting process problems. COVERAGE INCLUDES: Distillation tray malfunctions Packed tower problems Distillation tower pressure and composition control Fractionator product stripping Pumparounds Reboiled and steam side strippers Inspecting tower internals Process reboilers--thermosyphon circulation Heat exchangers Condenser limitations Air coolers Cooling water systems Steam condensate collection systems Steam quality problems Level control problems Process plant corrosion and fouling Vapor-liquid separation vessels Hydrocarbon-water separation and desalters Fired heaters--draft and excess O2 Disabling safety systems Vacuum systems and steam jets Vacuum surface condensers Centrifugal pump limitations Steam turbine drivers Centrifugal compressors Reciprocating compressors
Download or read book Buyers Guide for the Health Care Market written by and published by . This book was released on 1996 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Troubleshooting Vacuum Systems written by Norman P. Lieberman and published by John Wiley & Sons. This book was released on 2012-12-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum systems are in wide spread use in the petrochemical plants, petroleum refineries and power generation plants. The existing texts on this subject are theoretical in nature and only deal with how the equipment functions when in good mechanical conditions, from the viewpoint of the equipment vendor. Also, the existing texts fail to consider the interaction of the vacuum system with the process equipment it serves and the variability of the motive steam conditions, change in cooling water temperature condenser fouling and erosion of the ejectors. Here are some of the many questions answered in this groundbreaking volume: Why does my first stage jet make a surging sound during hot weather? Why does the vacuum suddenly break? I've seen moisture condensing on the jet's body! What’s causing that? Why do I have to steam-out the drain legs from our condensers? Superheated steam is making our vacuum worse. Is this normal? How can I locate and measure air leaks? Reducing the steam pressure to my jets improves vacuum. But why? I can't pull the pre-condenser bundle. The shell side is fouling. What should I do? We're not getting our normal horsepower from our steam turbine. Could this be a jet problem? Raising the seal drum level improves vacuum! Is there an explanation for this? Our turbine exhaust steam pressure to our surface condenser has doubled in the last two years. What should we do? Restricting cooling water flow from our elevated condensers improves vacuum! Is this possible? What's a converging-diverging ejector all about? What's the difference between a barometric condenser and a surface condenser? Which is better?
Download or read book Boiler Operator s Handbook written by Kenneth E. Heselton and published by The Fairmont Press, Inc.. This book was released on 2005 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for the boiler operator who has knowledge and experience, but would like to learn more in order to optimize his performance, this text is also clearly-presented enough to be an indispensable guide for those beginning their careers, as well as being suitable for managers and superintendents interested in reducing a facility's operating expense. Based on the author's forty years of experience in boiler plant operation, design, construction, start-up, retrofit and maintenance, it contains absolutely key recommendations to operators and managers of plants large and small.
Download or read book World Petroleum Register written by and published by . This book was released on 1922 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide to Industrial Boiler Systems written by Ralph Vandagriff and published by CRC Press. This book was released on 2001-04-18 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the fundamentals of boiler systems and gathers hard-to-find facts and observations for designing, constructing and operating industrial power plants in the United States and overseas. It contains formulas and spreadsheets outlining combustion points of natural gas, oil and solid fuel beds. It also includes a boiler operator's tra
