Download or read book Process property Relationships of Ti6Al4V Fabricated Through Selective Laser Melting written by Justin Mezzetta and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The selective laser melting (SLM) of TiAl6V4 has become an increasingly popular manufacturing option in the biomedical and aerospace fields, mainly due to its ability to create complex, net-shape parts within a short amount of time. To eventually incorporate additive manufacturing techniques like SLM into common manufacturing practice, it is imperative to ensure that the mechanical behaviour and performance of selective laser melted TiAl6V4 parts has the consistency of wrought material, especially for safety critical applications. This work explored the optimization of SLM machine parameters, such as laser power and laser scan speed in order to achieve maximum density. With optimized parameters, densities exceeding 99.5% were obtained for SLM parts. Afterwards, a series of post-SLM heat treatments were applied to tensile test specimens, to observe their effects on microstructure and mechanical properties. Through hot-isostatic-pressing (HIP), SLM yield strength values exceeded the wrought reference of 880 MPa. HIPed tensile specimens also surpassed the wrought reference for final elongation (14%) in many samples. As anisotropy in mechanical properties of SLM parts have been reported in previous works, crystal orientation and its effect on mechanical properties is discussed." --
Download or read book Processing Structure Property Relationships in Metals written by Alessandra Varone and published by MDPI. This book was released on 2019-11-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the industrial manufacturing of metals, the achievement of products featuring desired characteristics always requires the control of process parameters in order to obtain a suitable microstructure. The strict relationship among process parameters, microstructure, and mechanical properties is a matter of interest in different areas, such as foundry, plastic forming, sintering, welding, etc., and regards both well-established and innovative processes. Nowadays, circular economy and sustainable technological development are dominant paradigms and impose an optimized use of resources, a lower energetic impact of industrial processes and new tasks for materials and products. In this frame, this Special Issue covers a broad range of research works and contains research and review papers.
Download or read book Selective Laser Melting written by Prashanth Konda Gokuldoss and published by MDPI. This book was released on 2020-04-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure–property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure–property correlations in the SLM processed materials and provides a value addition to the field of AM.
Download or read book Additive Manufacturing of High Performance Metallic Materials written by Robert Pederson and published by Elsevier. This book was released on 2023-09-19 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of High-Performance Metallic Materials outlines the state-of-the-art on AM in high performance materials utilizing the two most industrially interesting routes of powder bed fusion (PBF) and directed energy deposition (DED). The book delves into Feedstock, Processing, Monitoring and control, Modeling and simulation, and Surface and thermal post-treatments. It specifically addresses materials and the most relevant and high performance applications, namely Ni-based alloys and Titanium alloys, and also provides insights into potential applications through illustrative case studies. With each chapter contributed by experts in the field, this work will serve as a comprehensive resource for graduate students and practitioners alike. - Covers the entire value chain relevant to additive manufacturing spanning feedstock, processing, monitoring, post-treatment, testing and applications - Includes the fundamental understanding of varied associated aspects derived from both extensive experimental knowledge and theoretical investigations - Addresses key materials relevant to varied high performance applications, namely Superalloys and Ni-based alloys
Download or read book Titanium Physical Metallurgy Processing and Applications written by F.H. Froes and published by ASM International. This book was released on 2015-02-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques.
Download or read book Additive Manufacturing Applications for Metals and Composites written by Balasubramanian, K.R. and published by IGI Global. This book was released on 2020-06-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.
Download or read book Thermophysical Properties of Additively Manufactured AM Ti6Al4V and AlSi10Mg written by Einat Strumza and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This work focused on the thermophysical properties (i.e., thermal expansion, heat capacity, thermal conductivity, and diffusivity) of Ti6Al4V and AlSi10Mg fabricated by selective laser melting (SLM) and Ti6Al4V fabricated by electron beam melting (EBM). Moreover, the relationship between thermophysical properties and intrinsic anisotropic behavior of AM parts was systematically investigated." -- From the abstract.
Download or read book Proceedings of the 9th International Symposium on Superalloy 718 Derivatives Energy Aerospace and Industrial Applications written by Eric Ott and published by Springer. This book was released on 2018-05-12 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technical meeting will focus on Alloy 718 and Superalloys in this class relative to alloy and process development, production, product applications, trends and the development of advanced modeling tools. The symposium provides an opportunity for authors to present technical advancements relative to a broad spectrum of areas while assessing their impact on related fields associated with this critical alloy group. There are continuing innovations relative to these alloys as well as novel processing techniques which continue to extend applications in very challenging environments ranging from corrosion resistance in the deep sea to high-stressed space applications.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. - Provides a clear process description of additive friction stir deposition and highlights key capabilities - Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding - Discusses future applications and areas of research for this technology
Download or read book TMS 2018 147th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer. This book was released on 2018-02-03 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection features papers presented at the 147th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Thermo Mechanical Modeling of Additive Manufacturing written by Michael Gouge and published by Butterworth-Heinemann. This book was released on 2017-08-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds, large electron beam parts and an exploration of residual stress and deformation mitigation strategies. Part III concerns the thermo-mechanical modeling of powder bed processes with a description of the heat input model, classical thermo-mechanical modeling, and part scale modeling. The book serves as an essential reference for engineers and technicians in both industry and academia, performing both research and full-scale production. Additive manufacturing processes are revolutionizing production throughout industry. These technologies enable the cost-effective manufacture of small lot parts, rapid repair of damaged components and construction of previously impossible-to-produce geometries. However, the large thermal gradients inherent in these processes incur large residual stresses and mechanical distortion, which can push the finished component out of engineering tolerance. Costly trial-and-error methods are commonly used for failure mitigation. Finite element modeling provides a compelling alternative, allowing for the prediction of residual stresses and distortion, and thus a tool to investigate methods of failure mitigation prior to building. - Provides understanding of important components in the finite element modeling of additive manufacturing processes necessary to obtain accurate results - Offers a deeper understanding of how the thermal gradients inherent in additive manufacturing induce distortion and residual stresses, and how to mitigate these undesirable phenomena - Includes a set of strategies for the modeler to improve computational efficiency when simulating various additive manufacturing processes - Serves as an essential reference for engineers and technicians in both industry and academia
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Computational Welding Mechanics written by John A. Goldak and published by Springer Science & Business Media. This book was released on 2006-07-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Welding Mechanics (CWM) provides readers with a complete introduction to the principles and applications of computational welding including coverage of the methods engineers and designers are using in computational welding mechanics to predict distortion and residual stress in welded structures, thereby creating safer, more reliable and lower cost structures. Drawing upon years of practical experience and the study of computational welding mechanics the authors instruct the reader how to: - understand and interpret computer simulation and virtual welding techniques including an in depth analysis of heat flow during welding, microstructure evolution and distortion analysis and fracture of welded structures, - relate CWM to the processes of design, build, inspect, regulate, operate and maintain welded structures, - apply computational welding mechanics to industries such as ship building, natural gas and automobile manufacturing. Ideally suited for practicing engineers and engineering students, Computational Welding Mechanics is a must-have book for understanding welded structures and recent technological advances in welding, and it provides a unified summary of recent research results contributed by other researchers.
Download or read book Selective Laser Melting Materials and Applications written by Prashanth Konda Gokuldoss and published by . This book was released on 2020 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers, and scientists. AM has the ability to fabricate materials to produce parts with complex shapes without any theoretical restrictions combined with added functionalities. Selective laser melting (SLM), also known as laser-based powder bed processing (LPBF), is one of the main AM process that can be used to fabricate wide variety of materials that are Al-, Ti-, Fe-, Ni-, Co-, W-, Ag-, and Au-based, etc. However, several challenges need to be addressed systematically, such as development of new materials that suit the SLM process conditions so the process capabilities can be fully used to produce new properties in these materials. Other issues in the field are the lack of microstructure-property correlations, premature failure, etc. Accordingly, this Special Issue (book) focuses mainly on the microstructure-correlation in three different alloys: AlSi10Mg, Ti6Al4V, and 304L stainless steel, where six articles are presented. Hence, this Special Issue outlines microstructure-property correlations in the SLM processed materials and provides a value addition to the field of AM.
Download or read book Modern Manufacturing Processes for Aircraft Materials written by Selim Gurgen and published by Elsevier. This book was released on 2023-11-15 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.530 pages Provides detailed explanation of modern manufacturing processes used in the aircraft industry Covers additive manufacturing both for polymeric and metallic materials, electrical discharge machining, laser welding, electron-beam welding, and micro-machining Explains manufacturing operations for not only metallic materials but also polymers and composites
Download or read book The Influence of Manufacturing Parameters on Properties of Ti 6Al 4V Products Fabricated by Selective Laser Melting and Their Surface Coating with Bioactive Polymer written by Snehashis Pal and published by . This book was released on 2019 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
