Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-20 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This fourth volume covers the following main topics: aero-engines; turbochargers; eolian (wind) generators; automotive rotating systems; and hydro power plants.

Download or read book Green Tribology written by Michael Nosonovsky and published by Springer Science & Business Media. This book was released on 2012-01-15 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is the study of friction, wear and lubrication. Recently, the concept of “green tribology” as “the science and technology of the tribological aspects of ecological balance and of environmental and biological impacts” was introduced. The field of green tribology includes tribological technology that mimics living nature (biomimetic surfaces) and thus is expected to be environmentally friendly, the control of friction and wear that is of importance for energy conservation and conversion, environmental aspects of lubrication and surface modification techniques, and tribological aspects of green applications such as wind-power turbines or solar panels. This book is the first comprehensive volume on green tribology. The chapters are prepared by leading experts in their fields and cover such topics as biomimetics, environmentally friendly lubrication, tribology of wind turbines and renewable sources of energy, and ecological impact of new technologies of surface treatment.

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.

Download or read book Microfabricated Power Generation Devices written by Alexander Mitsos and published by John Wiley & Sons. This book was released on 2009-03-02 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energiegewinnung im Mikromaßstab -- eine Alternative zu Energiespeichern (Batterien, Akkumulatoren) für mobile elektrische Geräte? Durchaus, wie dieser Band eindrucksvoll zeigt. Die einzelnen Beiträge, verfasst von international anerkannten Fachleuten, befassen sich mit Grundlagen der Energiegewinnung, Strategien und Designfragen bis hin zur konkreten technischen Umsetzung. Ergänzend werden Themen wie die Verarbeitung und Bereitstellung von Brennstoffen, die Steuerung von Stoff- und Wärmeströmen sowie Fragen der Wirtschaftlichkeit und Qualitätssicherung besprochen.

Download or read book Applied Scanning Probe Methods IX written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes VIII, IX and X examine the physical and technical foundation for recent progress in applied scanning probe techniques. This is the first book to summarize the state-of-the-art of this technique. The field is progressing so fast that there is a need for a set of volumes every 12 to 18 months to capture latest developments. These volumes constitute a timely and comprehensive overview of SPM applications.

Download or read book Topics in Modal Analysis I Volume 5 written by R. Allemang and published by Springer Science & Business Media. This book was released on 2012-05-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis I, Volume 5. Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, the fifth volume of six from the Conference, brings together 53 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Modal Parameter Identification Damping of Materials and Members New Methods Structural Health Monitoring Processing Modal Data Operational Modal Analysis Damping Excitation Methods Active Control Damage Detection for Civil Structures System Identification: Applications

Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2006 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi Wafer Rotating MEMS Machines written by Jeffrey Lang and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collaboration and research that was developed to produce the MIT Gas Turbine Engine are described in this book. Both the engine and generator are fabricated from silicon using a combination of bulk and surface microfabrication technologies. The book discusses the technical details that have gone into producing the engine and the overall systems-level tradeoffs, in particular its motor compressors and turbine generators, and the decisions that have been made.

Download or read book Nanocrystalline Titanium written by Halina Garbacz and published by Elsevier. This book was released on 2018-09-17 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystalline Titanium discusses the features of nanocrystalline titanium production by various SPD methods, also comparing their microstructure and properties. The authors characterize the physical, chemical and mechanical properties of ultrafine grained titanium, indicating which are crucial for their application. Titanium alloys are characterized by high specific strength combined with excellent corrosion resistance, whereas the mechanical properties of pure (or commercial purity - CP) titanium are much lower. SPD methods are proving to be an effective way to increase strength, even to a level typical for structural titanium alloys. This book is useful for academics and professionals studying the behavior of metallic materials. - Discusses various SPD techniques and their applications for titanium - Previews the limitations of SPD methods for titanium, along with the problems that can be encountered during production - Characterizes the physical, chemical and mechanical properties of ultrafine grained titanium and indicates which are crucial for its production applications

Download or read book Advances in Engineering Design written by Pawan Kumar Rakesh and published by Springer Nature. This book was released on 2021-02-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Innovative Engineering Design (ICOIED 2020). The contents provide a multidisciplinary approach for the development of innovative product design and their benefits for the society. The book presents latest advances in various fields like design process, service development, micro/nano technology, sensors and MEMS, and sustainability in engineering design. This book can be useful for students, researchers, and professionals interested in innovative product/process design and development.

Download or read book 11th International Conference on Turbochargers and Turbocharging written by IMechE and published by Elsevier. This book was released on 2014-08-25 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway

Download or read book New Tribological Ways written by Taher Ghrib and published by BoD – Books on Demand. This book was released on 2011-04-26 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to recapitulate old information's available and brings new information's that are with the fashion research on an atomic and nanometric scale in various fields by introducing several mathematical models to measure some parameters characterizing metals like the hydrodynamic elasticity coefficient, hardness, lubricant viscosity, viscosity coefficient, tensile strength .... It uses new measurement techniques very developed and nondestructive. Its principal distinctions of the other books, that it brings practical manners to model and to optimize the cutting process using various parameters and different techniques, namely, using water of high-velocity stream, tool with different form and radius, the cutting temperature effect, that can be measured with sufficient accuracy not only at a research lab and also with a theoretical forecast. This book aspire to minimize and eliminate the losses resulting from surfaces friction and wear which leads to a greater machining efficiency and to a better execution, fewer breakdowns and a significant saving. A great part is devoted to lubrication, of which the goal is to find the famous techniques using solid and liquid lubricant films applied for giving super low friction coefficients and improving the lubricant properties on surfaces.

Download or read book Tribology for Scientists and Engineers written by Pradeep L. Menezes and published by Springer Science & Business Media. This book was released on 2013-12-04 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.

Download or read book Aqueous Lubrication Natural And Biomimetic Approaches written by Nicholas D Spencer and published by World Scientific. This book was released on 2014-03-24 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Man lubricates mostly with oil. Nature lubricates exclusively with water. Pure water is a poor lubricant, but the addition of proteins, especially glycoproteins, can modify surfaces to make them far more lubricating at slow speeds. Understanding how nature does this, and the physical structures involved, is not only important for the understanding of diseases such as osteoarthritis, but also essential for the successful application of articulating implants, such as hips and knees, as well as the development of medical devices such as catheters and contact lenses. A host of important applications of water-based lubrication are already in place in the personal care and food industries, and further industrial applications of water-based lubrication could have a significant positive impact on the environment.This book is the first of its kind. It brings together the latest research in biological and biomimetic, water-based lubrication and is authored by the world's experts in the field.

Download or read book Advanced Concepts in Mechanical Engineering II written by Ioan Doroftei and published by Trans Tech Publications Ltd. This book was released on 2014-10-01 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from a collection of papers from the 6th International Conference on Advanced Concepts in Mechanical Engineering (ACME 2014), June 12-13, 2014, Iasi, Romania

Download or read book Applied Tribology written by Michael M. Khonsari and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of tribological technology in bearings are wide and varied in industries ranging from aerospace, marine and automotive to power, process, petrochemical and construction. Applied Tribology, 2nd edition not only covers tribology in bearings but demonstrates the same principles for other machine components, such as piston pins, piston rings and hydrostatic lifts, as well as in more recent technologies such as gas bearings in high-speed machines and computer read-write devices. Maintaining a balance between theoretical analysis and practical experience with co-authors from academia and industry, this new edition is significantly revised and expanded with new material. Features include; • Two brand new chapters on seals and bearing failure modes and bearing health monitoring techniques • Coverage of new developments in full-film, dry, and partial lubrication; gas bearings; and ball and roller bearings • Design guides based on full Reynolds equation that enable accurate prediction of load capacity, power loss, temperature rise • Comprehensive presentation of important design factors involving material and lubricants. • State-of-the-art presentation and up-to-date references of pertinent scientific and applied topics in tribology • Numerous examples that reinforce the understanding of concepts and provide procedures for the design and performance analysis of components Applied Tribology, 2nd edition provides a valuable and authoritative resource for mechanical engineering professionals working in a wide range of industries with machinery including turbines, compressors, motors, electrical appliances & electronic components. Senior and graduate students in mechanical engineering will also find it a useful text and reference.

Download or read book Progress in Biomass and Bioenergy Production written by Shahid Shaukat and published by BoD – Books on Demand. This book was released on 2011-07-27 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative energy sources have become a hot topic in recent years. The supply of fossil fuel, which provides about 95 percent of total energy demand today, will eventually run out in a few decades. By contrast, biomass and biofuel have the potential to become one of the major global primary energy source along with other alternate energy sources in the years to come. A wide variety of biomass conversion options with different performance characteristics exists. The goal of this book is to provide the readers with current state of art about biomass and bioenergy production and some other environmental technologies such as Wastewater treatment, Biosorption and Bio-economics. Organized around providing recent methodology, current state of modelling and techniques of parameter estimation in gasification process are presented at length. As such, this volume can be used by undergraduate and graduate students as a reference book and by the researchers and environmental engineers for reviewing the current state of knowledge on biomass and bioenergy production, biosorption and wastewater treatment.