Download or read book Proceedings of the International Conference on Bituminous Coal written by Carnegie Institute of Technology and published by . This book was released on 1927 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Second International Conference on Bituminous Coal written by and published by . This book was released on 1928 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 6th FIRST 2022 International Conference FIRST ESCSI 2022 written by Nyayu Latifah Husni and published by Springer Nature. This book was released on 2023-06-21 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book.The 6th FIRST 2022 International Conference offers the researchers in academics, industries, and governments, a conference, for exchanging, sharing, following up, and discussing the results of the latest researches, industry’s needs, and government regulatory policies. The 6th FIRST 2022 International Conference facilitates the participants from all over the world to meet face to face to open chances in establishing connections and collaboration among them.

Download or read book Proceedings of the 7th International Conference on Industrial Engineering ICIE 2021 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2022-01-01 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Wood Fire Safety written by Linda Makovicka Osvaldova and published by Springer Nature. This book was released on 2020-03-14 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume presents new scientific works of the research workers and experts from the field of Wood Science & Fire. It looks into the properties of various tree species across the continents affecting the fire-technical properties of wood and wood-based materials, its modifications, fire-retardant methods and other technological processes that have an impact on wood ignition and burning. The results of these findings have a direct impact on Building Construction and Design describing the fire safety of wooden buildings, mainly large and multi-story ones. The results of these experiments and findings may be applied, or are directly implemented into Fire Science, Hazard Control, Building Safety which makes the application of wood and wood materials in buildings possible, while maintaining strict fire regulations. One part of the contributions focuses on the symbiosis of the material and the fire-fighting technologies. Wood burning has its own specific features, therefore, the fire protection technologies need to be updated regularly. It also includes the issue of the intervention of fire-fighting and rescue teams in the fires of wooden buildings. Presentations deal with the issue of forest fires influenced by the climate changes, relief, fuel models based on the type and the age of the forest stand.

Download or read book Research Note FPL written by and published by . This book was released on 1979 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the International Conference on Education London 1884 written by Richard Cowper and published by . This book was released on 1884 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the International Conference on Education London 1884 written by W. Richard Cowper and published by . This book was released on 1884 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1972 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 1995 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conservation of Furniture written by Shayne Rivers and published by Routledge. This book was released on 2007-06-07 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive resource covering the principles and practice of the conservation and restoration of furniture, and other decorative art objects made wholly or partly of wood. It integrates theory with practice to show the principles which govern interaction between wooden objects, the environmental and conservation treatments and the factors which need to be taken into account to arrive at acceptable solutions to conservation problems. The practical knowledge and experience of a team of conservators active in the field are bought together with theoretical and reference material from diverse sources and unified within a systematic framework. Specialist conservators from related disciplines cover diverse materials often incorporated into furniture.

Download or read book The Archaeologist s Manual for Conservation written by Bradley A. Rodgers and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a Foreword by an archaeologist, not a conservator, but as Brad Rodgers says, “Conservation has been steadily pulled from archaeology by the forces of specialization”(p. 3),andhewantstoremedythatsituationthroughthismanual. He seesthisworkasa“calltoactionforthenon-professionalconservator,”permitting “curators, conservators, and archaeologists to identify artifacts that need prof- sional attention and, allow these professionals to stabilize most artifacts in their own laboratories with minimal intervention, using simple non-toxic procedures” (p. 5). It is the mission of Brad’s manual to “bring conservation back into arch- ology” (p. 6). The degree of success of that goal depends on the degree to which archaeologists pay attention to, and put to use, what Brad has to say, because as he says, “The conservationist/archaeologist is responsible to make preparation for an artifact’s care even before it is excavated and after its storage into the foreseeable future”. . . a tremendous responsibility” (p. 10). The manual is a combination of highly technical as well as common sense methods of conserving wood, iron and other metals, ceramics, glass and stone, organicsandcomposits—afarbetterguidetoartifactconservationthanwasava- able to me when I ?rst faced that archaeological challenge at colonial Brunswick Town, North Carolina in 1958—a challenge still being faced by archaeologists today. The stage of conservation in 1958 is in dramatic contrast to the procedures Brad describes in this manual—conservation has indeed made great progress. For instance,acommonprocedurethenwastoheattheartifactsredhotinafurnace—a method that made me cringe.

Download or read book Bondability of modified wood written by Alireza Bastani and published by Cuvillier Verlag. This book was released on 2016-06-30 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study investigates the bonding properties of modified wood by considering three different aspects: water related characteristics, mechanical performance and optical (fluorescence microscopy and X-ray micro-computed tomography) observation of adhesive penetration into modified wood structure. In recent years, the new wood modifications have become more commercially available in the market for both exterior and interior applications due to improved properties that modification can bring to the wood e.g. the improved biological durability, dimensional stability, hardness and weathering resistance of the wood as well as the environmentally friendly nature of the wood modification processes (Militz and Hill 2005). Besides these advantages, modification can affect some technological aspects of the wood such as its bonding performance. For example, it can alter the strength of adhesion as a result of changes in chemical, physical and structural characteristics of the wood. For example, the less polar and less porous modified wood surfaces can result in reduced adhesion due to formation of less free OH groups for bonding leading to poorer adhesive wetting of the wood surface and weaker chemical bonds between the two adherents (Hunt et al. 2007). As modified wood becomes a more demanded material for different applications, there is a need to study its bonding performance where the challenge is to bond different modified materials as their physical and chemical characteristics are substantially changed by modification. In this thesis, measurements of capillary water uptake, contact angle and surface energy were used to determine the water related properties and hydrophobic behavior of furfurylated (FA40 and FA70, which represent 65 and 75 % WPGs) and N-methylol melamine (NMM) (10, 20 and 30%) modified Scots pine and thermally treated Scots pine and beech (modified through an industrial scale vacuum press dewatering method at 195 and 210 °C). The capillary water uptake results indicated a considerable reduction of water uptake for all modifications in all directions both after short (24 h) and long contact times (168, 336 h). Contact angle measurement data revealed an increased hydrophobicity of modified wood. However, some exceptions were observed, mainly for thermally treated wood. Modifications provided radial and tangential surfaces with a non-polar character. Penetration of adhesives into the wood structure plays an important role in the production of glued wood-based panels and products by affecting the bond quality (Frihart 2005, Kamke and Lee 2007). The gross penetration of emulsion polymer isocyanate (EPI), polyurethane (PU) and polyvinyl acetate (PVAc) adhesives into modified wood, both with and without pressure, were determined by using fluorescence microscopy based on measurements of effective (EP) and maximum penetration (MP). Without application of pressure, the EP of EPI adhesive reduced after NMM modification and furfurylation (FA70) and also PU adhesive after NMM modification while the EP of PVAc adhesive increased into furfurylated and NMM modified (10 and 20%) wood. For thermally treated Scots pine, increasing the treatment temperature improved EP of all adhesives. Among used adhesives, PU penetrated much deeper into thermally treated wood for both treatment temperatures. Comparison of penetration of adhesive with and without pressure revealed that with the exception of EP of PU and EPI adhesives into NMM-modified wood and PVAc into thermally treated beech at 195°C, application of pressure led to rather different results as compared to the EP data when no pressure was applied. Visual observation and analysis of fluorescence microscopy photomicrographs provided more detailed information on modality of penetration. Due to the large and deep penetration of PU adhesive into thermally treated Scots pine observed in both studies (with and without pressure), the 3D pattern of penetration of this adhesive was obtained by X-ray micro- computed tomography indicating the pathways which were used by this adhesive for penetration. In another study, the bonding shear strength of the same modified wood materials glued with the same adhesives was also investigated. For all adhesives used, the shear strength significantly reduced after furfurylation and NMM modification of Scots pine samples, mainly due to the brittle nature of the wood after modification rather to the failure of the bondline. Bonding strength of both Scots pine and beech was also negatively affected by thermal modification and the bondline was found to be the weakest link in thermally modified wood. The EP of adhesives and the bondline thickness did not relate to the shear strength of all modified wood materials. It was indicated that the lower shear strength of modified wood could be attributed to other factors, such as the decreased chemical bonding or mechanical interlocking of adhesives, and the reduced strength of brittle modified wood substrate. The effect of two important bonding variables, wood moisture content and open assembly time on penetration of PU adhesive into thermally modified wood (195 and 210 °C) was also studied. The equilibrium moisture content (EMC) level of 8.6% was found to be the optimum for an effective penetration of PU adhesive in thermally modified Scots pine treated at 195°C. In most of the cases, penetration of PU adhesive did not change significantly by increasing the open assembly time, which suggested using a shorter open assembly time of 15 min than 30 min for bonding of thermally modified Scots pine with PU adhesive, in order to save time and reducing the production costs. For samples treated at both treatment temperatures and after shorter open assembly time, the highest MP values observed at moderate EMC levels of 8.6 and 8.2% and the lowest at the higher EMC levels of 13.2 and 12.5%. In another study, the effect of phenol formaldehyde (PF) treatment on bonding performance of beech glued with PVAc and phenol resorcinol formaldehyde (PRF) adhesives was also investigated. The results of both dry and wet conditions indicated higher shear strength for samples bonded with PRF than PVAc. With the exception of 25% PF treated wood bonded with PVAc, the PF modified wood can be glued with both adhesives satisfactorily under dry condition, while under wet condition only the 25% PF modified samples bonded with PRF provided acceptable bonding. For both adhesive systems, PF modification caused a reduction of adhesive penetration into wood structure, especially in the case of higher load treatment. The development of bonding strength of modified birch veneers glued with hot curing phenol formaldehyde (PF) adhesive was investigated in different pressing (20 s , 160s) and open assembly times (20s , 10 min). Generally, the bonding strength improved by extending the pressing time. In 20 s pressing, increasing assembly time did not change the bonding strength in most of the cases while at 160 s pressing, prolongation of assembly time developed a better bonding for controls, NMM modified and thermally treated veneers at 180°C. The combination of 10 min assembly time and 160 s pressing time provided the highest bonding strength for controls, NMM modified and thermally treated veneers at 180°C while furfurylated samples achieved the highest values in 20 s assembly and 160 s pressing times. In general, modification affected negatively the bonding performance of the veneers, especially for furfurylated and NMM modified samples. In General, the overall results obtained in this thesis showed that modified wood has lower bonding ability and performance than unmodified wood as result of the decreased water related properties, less penetration of adhesive into wood structure and decreased bonding strength after modification. However, the increased dimensional stability and low water uptake of modified wood might lead to better performance in long term.

Download or read book Bamboo written by Esther Titilayo Akinlabi and published by Springer. This book was released on 2017-07-24 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for use both in the industry and the academia. It introduces the physical, chemical and the mechanical properties as well as the characterization of bamboo. Novel industrial applications in structural, non-structural, reinforcement, afforestation, land reclamation, environmental significance, textile, medical, geotechnical, hydraulic, food, pulp and the paper industries are addressed in detail. Bamboo has been used for centuries as a structural material as well as in diverse engineering applications, food and medicinal purposes, especially in Asia. As a natural fiber composite, bamboo has the potential for many developments in academic and industrial research. Current literature on composites tends to focus on bamboo as a plant or solely as a structural engineering material. This book seeks to bring together these two extremes and provides a holistic resource on the subject.

Download or read book Handbook of Wood Chemistry and Wood Composites Second Edition written by Roger M. Rowell and published by CRC Press. This book was released on 2012-09-06 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood has played a major role throughout human history. Strong and versatile, the earliest humans used wood to make shelters, cook food, construct tools, build boats, and make weapons. Recently, scientists, politicians, and economists have renewed their interest in wood because of its unique properties, aesthetics, availability, abundance, and perhaps most important of all, its renewability. However, wood will not reach its highest use potential until we fully describe it, understand the mechanisms that control its performance properties, and, finally, are able to manipulate those properties to give us the desired performance we seek. The Handbook of Wood Chemistry and Wood Composites analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood. They emphasize the mechanisms of reaction involved and resulting changes in performance properties including modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating decades of teaching experience, the editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.

Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.

Download or read book Proceedings of the Annual Meeting of the American Wood Preservers Association written by American Wood-Preservers' Association and published by . This book was released on 1927 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: