Download or read book Electronic Materials Handbook written by and published by ASM International. This book was released on 1989-11-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1: Packaging is an authoritative reference source of practical information for the design or process engineer who must make informed day-to-day decisions about the materials and processes of microelectronic packaging. Its 117 articles offer the collective knowledge, wisdom, and judgement of 407 microelectronics packaging experts-authors, co-authors, and reviewers-representing 192 companies, universities, laboratories, and other organizations. This is the inaugural volume of ASMAs all-new ElectronicMaterials Handbook series, designed to be the Metals Handbook of electronics technology. In over 65 years of publishing the Metals Handbook, ASM has developed a unique editorial method of compiling large technical reference books. ASMAs access to leading materials technology experts enables to organize these books on an industry consensus basis. Behind every article. Is an author who is a top expert in its specific subject area. This multi-author approach ensures the best, most timely information throughout. Individually selected panels of 5 and 6 peers review each article for technical accuracy, generic point of view, and completeness.Volumes in the Electronic Materials Handbook series are multidisciplinary, to reflect industry practice applied in integrating multiple technology disciplines necessary to any program in advanced electronics. Volume 1: Packaging focusing on the middle level of the electronics technology size spectrum, offers the greatest practical value to the largest and broadest group of users. Future volumes in the series will address topics on larger (integrated electronic assemblies) and smaller (semiconductor materials and devices) size levels.
Download or read book Proceedings 1960 Electronic Components Conference written by and published by . This book was released on 1960 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference on Electronic Components and Materials written by and published by Pergamon. This book was released on 1989 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.
Download or read book Nanopackaging written by James E. Morris and published by Springer. This book was released on 2018-09-22 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of nanoscale electronics and systems packaging, and covers nanoscale structures, nanoelectronics packaging, nanowire applications in packaging, and offers a roadmap for future trends. Composite materials are studied for high-k dielectrics, resistors and inductors, electrically conductive adhesives, conductive "inks," underfill fillers, and solder enhancement. The book is intended for industrial and academic researchers, industrial electronics packaging engineers who need to keep abreast of progress in their field, and others with interests in nanotechnology. It surveys the application of nanotechnologies to electronics packaging, as represented by current research across the field.
Download or read book Solder Paste in Electronics Packaging written by Jennie Hwang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the strongest trends in the design and manufacture of modern electronics packages and assemblies is the utilization of surface mount technology as a replacement for through-hole tech nology. The mounting of electronic devices and components onto the surface of a printed wiring board or other substrate offers many advantages over inserting the leads of devices or components into holes. From the engineering viewpoint, much higher lead counts with shorter wire and interconnection lengths can be accommo dated. This is critical in high performance modern electronics packaging. From the manufacturing viewpoint, the application of automated assembly and robotics is much more adaptable to high lead count surface mounted devices and components. Indeed, the insertion of high lead count parts into fine holes on a substrate might often be nearly impossible. Yet, in spite of these surface mounting advantages, the utilization of surface mount technology is often a problem, primarily due to soldering problems. The most practical soldering methods use solder pastes, whose intricacies are frequently not understood by most of those involved in the engineering and manufacture of electronics assemblies. This publication is the first book devoted exclusively to explanations of the broad combination of the chemical, metallurgical, and rheological principles that are critical to the successful use of solder pastes. The critical relation ships between these characteristics are clearly explained and pre sented. In this excellent presentation, Dr. Hwang highlights three impor tant areas of solder paste technology.
Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C. P.(Ching-Ping) Wong and published by Springer Nature. This book was released on 2021-03-17 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how nanofabrication techniques and nanomaterials can be used to customize packaging for nano devices with applications to electronics, photonics, biological and biomedical research and products. It covers topics such as bio sensing electronics, bio device packaging, MEMS for bio devices and much more, including: Offers a comprehensive overview of nano and bio packaging and their materials based on their chemical and physical sciences and mechanical, electrical and material engineering perspectives; Discusses nano materials as power energy sources, computational analyses of nano materials including molecular dynamic (MD) simulations and DFT calculations; Analyzes nanotubes, superhydrophobic self-clean Lotus surfaces; Covers nano chemistry for bio sensor/bio material device packaging. This second edition includes new chapters on soft materials-enabled packaging for stretchable and wearable electronics, state of the art miniaturization for active implantable medical devices, recent LED packaging and progress, nanomaterials for recent energy storage devices such as lithium ion batteries and supercapacitors and their packaging. Nano- Bio- Electronic, Photonic and MEMS Packaging is the ideal book for all biomedical engineers, industrial electronics packaging engineers, and those engaged in bio nanotechnology applications research.
Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: - Manufacturing techniques for 3-D ICs with TSVs - Electrical modeling and closed-form expressions of through silicon vias - Substrate noise coupling in heterogeneous 3-D ICs - Design of 3-D ICs with inductive links - Synchronization in 3-D ICs - Variation effects on 3-D ICs - Correlation of WID variations for intra-tier buffers and wires - Offers practical guidance on designing 3-D heterogeneous systems - Provides power delivery of 3-D ICs - Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more - Provides experimental case studies in power delivery, synchronization, and thermal characterization
Download or read book Microcircuit Reliability Bibliography written by and published by . This book was released on 1978 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronics Packaging Forum written by James E. Morris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each May, the Continuing Education Division of the T.J.Watson School of Engineering, Applied Science and Technology at the State University of New York at Binghamton sponsors an Annual Symposium in Electronics Packaging in cooperation with local professional societies (IEEE, ASME, SME, IEPS) and UnlPEG (the University-Industry Partnership for Economic Growth.) Each volume of this Electronics Packaging Forum series is based on the the preceding Symposium, with Volume Two based on the 1990 presentations. The Preface to Volume One included a brief definition of the broad scope of the electronics packaging field with some comments on why it has recently assumed such a more prominent priority for research and development. Those remarks will not be repeated here; at this point it is assumed that the reader is a professional in the packaging field, or possibly a student of one of the many academic disciplines which contribute to it. It is worthwhile repeating the series objectives, however, so the reader will be clear as to what might be expected by way of content and level of each chapter.
Download or read book Area Array Interconnection Handbook written by Karl J. Puttlitz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic packaging has been recognized as an important "enabler" for the solid state revolution in electronics which we have witnessed in the last third of the twentieth century. Packaging has provided the necessary external wiring and interconnection capability for transistors and integrated circuits while they have gone through their own spectacular revolution from discrete device to gigascale integration. At IBM we are proud to have created the initial, simple concept of flip chip with solder bump connections at a time when a better way was needed to boost the reliability and improve the manufacturability of semiconductors. The basic design which was chosen for SLT (Solid Logic Technology) in the 1960s was easily extended to integrated circuits in the '70s and VLSI in the '80s and '90s. Three I/O bumps have grown to 3000 with even more anticipated for the future. The package families have evolved from thick-film (SLT) to thin-film (metallized ceramic) to co-fired multi-layer ceramic. A later family or ceramics with matching expansivity to sili con and copper internal wiring was developed as a predecessor of the chip interconnection revolution in copper, multilevel, submicron wiring. Powerful server packages have been de veloped in which the combined chip and package copper wiring exceeds a kilometer. All of this was achieved with the constant objective of minimizing circuit delays through short, efficient interconnects.
Download or read book 3D Microelectronic Packaging written by Yan Li and published by Springer. This book was released on 2017-01-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive reference for graduate students and professionals in both academia and industry on the fundamentals, processing details, and applications of 3D microelectronic packaging, an industry trend for future microelectronic packages. Chapters written by experts cover the most recent research results and industry progress in the following areas: TSV, die processing, micro bumps, direct bonding, thermal compression bonding, advanced materials, heat dissipation, thermal management, thermal mechanical modeling, quality, reliability, fault isolation, and failure analysis of 3D microelectronic packages. Numerous images, tables, and didactic schematics are included throughout. This essential volume equips readers with an in-depth understanding of all aspects of 3D packaging, including packaging architecture, processing, thermal mechanical and moisture related reliability concerns, common failures, developing areas, and future challenges, providing insights into key areas for future research and development.
Download or read book Lead free Electronics written by Sanka Ganesan and published by John Wiley & Sons. This book was released on 2006-03-31 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lead-free Electronics provides guidance on the design and use of lead-free electronics as well as technical and legislative perspectives. All the complex challenges confronting the elec-tronics industry are skillfully addressed: * Complying with state legislation * Implementing the transition to lead-free electronics, including anticipating associated costs and potential supply chain issues * Understanding intellectual property issues in lead-free alloys and their applications, including licensing and infringement * Implementing cost effective manufacturing and testing * Reducing risks due to tin whiskers * Finding lead-free solutions in harsh environments such as in the automotive and telecommunications industries * Understanding the capabilities and limitations of conductive adhesives in lead-free interconnects * Devising solutions for lead-free, flip-chip interconnects in high-performance integrated circuit products Each chapter is written by leading experts in the field and carefully edited to ensure a consistent approach. Readers will find all the latest information, including the most recent data on cyclic thermomechanical deformation properties of lead-free SnAgCu alloys and a comparison of the properties of standard Sn-Pb versus lead-free alloys, using the energy partitioning approach. With legislative and market pressure to eliminate the use of lead in electronics manufacturing, this timely publication is essential reading for all engineers and professionals in the electronics industry.
Download or read book Integrated Circuit Hybrid and Multichip Module Package Design Guidelines written by Michael Pecht and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit designers, packaging engineers, printed board fabricators, and procurement personnel will find this book's microelectronic package design-for-reliability guidelines and approaches essential for achieving their life-cycle, cost-effectiveness, and on-time delivery goals. Its uniquely organized, time-phased approach to design, development, qualification, manufacture, and in-service management shows you step-by-step how to: * Define realistic system requirements in terms of mission profile, operating life, performance expectations, size, weight, and cost * Define the system usage environment so that all operating, shipping, and storage conditions, including electrical, thermal, radiation, and mechanical loads, are assessed using realistic data * Identify potential failure modes, sites, mechanisms, and architecture-stress interactions--PLUS appropriate measures you can take to reduce, eliminate, or accommodate expected failures * Characterize materials and processes by the key controllable factors, such as types and levels of defects, variations in material properties and dimensions, and the manufacturing and assembly processes involved * Use experiment, step-stress, and accelerated methods to ensure optimum design before production begins Detailed design guidelines for substrate...wire and wire, tape automated, and flip-chip bonding...element attachment and case, lead, lead and lid seals--incorporating dimensional and geometric configurations of package elements, manufacturing and assembly conditions, materials selection, and loading conditions--round out this guide's comprehensive coverage. Detailed guidelines for substrate...wire and wire, tape automated, and flip-chip bonding...element attachment and case, lead, lead and lid seals--incorporating dimensional and geometric configurations of package elements, manufacturing and assembly conditions, materials selection, and loading conditions--round out this guide's comprehensive coverage. of related interest... PHYSICAL ARCHITECTURE OF VLSI SYSTEMS --Allan D. Kraus, Robert Hannemann and Michael Pecht For the professional engineer involved in the design and manufacture of products containing electronic components, here is a comprehensive handbook to the theory and methods surrounding the assembly of microelectronic and electronic components. The book focuses on computers and consumer electronic products with internal subsystems that reflect mechanical design constraints, cost limitations, and aesthetic and ergonomic concerns. Taking a total system approach to packaging, the book systematically examines: basic chip and computer architecture; design and layout; interassembly and interconnections; cooling scheme; materials selection, including ceramics, glasses, and metals; stress, vibration, and acoustics; and manufacturing and assembly technology. 1994 (0-471-53299-1) pp. SOLDERING PROCESSES AND EQUIPMENT --Michael G. Pecht This comprehensive, fundamentals first handbook outlines the soldering methods and techniques used in the manufacture of microelectronic chips and electronic circuit boards. In a clear, easy-to-access format, the book discusses: soldering processes and classification; the material dynamics of heat soldering when assembling differing materials; wave and reflow soldering; controlling contamination during manufacturing cleanings; techniques for assuring reliability and quality control during manufacturing; rework, repair, and manual assembly; the modern assembly / repair station; and more. The book also provides clear guidelines on assembly techniques as well as an appendix of various solder equipment manufacturers. 1993 (0-471-59167-X) 312 pp.
Download or read book Advanced Flip Chip Packaging written by Ho-Ming Tong and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable.
Download or read book Solder Joint Reliability written by John H. Lau and published by Springer Science & Business Media. This book was released on 1991-05-31 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at how solder joint reliability is influenced by flux reactions, solder paste, reflow methods, wave soldering, and cleaning. Explores failure mechanisms and includes practical methods for testing, analysis, and life prediction of solder joints subjected to conditions of fatigue, creep, stress relaxation, shock, and vibration. For engineers and designers involved in electronics packaging. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Electrically Conductive Adhesives written by Rajesh Gomatam and published by BRILL. This book was released on 2008-12-23 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on two Special Issues of the Journal of Adhesion Science and Technology (JAST vol. 22, no. 8-9 and vol. 22, no. 14) dedicated to the logic of electrically conductive adhesives. The contains a total of 21 papers (reflecting overviews and original research).
