Download or read book Proceedings of the Tenth International Conference on Composite Materials written by Anoush Poursartip and published by Woodhead Publishing. This book was released on 1995 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Optics Sensor Based Smart Materials and Structures Proceedings of the 5th Annual Smart Materials and Structures Workshop Held in Blacksburg Virginia April 1992 written by Richard O. Claus and published by CRC Press. This book was released on 1992 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of ten years of development in the area of optical sensing technology for application in smart materials are presented in this proceedings volume. A broad spectrum of subjects are covered: fiber sensor fundamentals; techniques for the measurement of strain, temperature, vibration and degradation; the monitoring of material fabrication and in-service lifetime properties; special consideration of high-temperature materials. This title will provide an invaluable record of the current status of this technology and a vision of its future directions and capabilities - of interest to engineers and physicists working with optical fiber technology.
Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems written by and published by Allied Publishers. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Fiber Sensor Based Smart Materials and Structures written by Richard O. Claus and published by CRC Press. This book was released on 1991 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Optic Smart Structures written by Eric Udd and published by Wiley-Interscience. This book was released on 1995-04-17 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as an introduction and reference to fiber optic smart structures. Smart structures are used as sensors in a wide variety of applications and fields--from aerospace engineering to electrical engineering to civil engineering.
Download or read book Iccm 12 written by Woodhead Publishing, Limited and published by Woodhead Publishing. This book was released on 1997 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Structures written by A. V. Srinivasan and published by Cambridge University Press. This book was released on 2001 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory text on the analysis and design of smart devices and structures.
Download or read book Proceedings of the American Society for Composites Seventeenth Technical Conference written by C. T. Sun and published by CRC Press. This book was released on 2002-10-24 with total page 1685 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Materials for Civil Infrastructure written by Roberto A. Lopez-Anido and published by ASCE Publications. This book was released on 2000-01-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Emerging Materials Committee of the Materials Division of ASCE. This report presents a review of the state of the art on emerging materials for use in civil engineering infrastructure. Emerging materials include novel and new materials, as well as traditional materials with profound potential in new applications. A material or class of materials is considered "emerging" if its use has not yet progressed to a stage wherein well-established guidelines, codes, and specifications exist for its use. This report is conveniently divided into chapters that address specific classes of materials andØhighlight the most recent developments in materials technologies relevant to civil infrastructure.Ø Topics include: smart materials for civil engineering applications; fiber reinforced composites in civil infrastructure; emerging geomaterials for ground improvement; aluminum materials and the infrastructure; polymer concrete made with recycled plastics; state of the practice in asphalt technology; emerging uses for masonry materials; and emerging uses for window glass. The practicing engineer, student, or general reader will find this to be an easy-to-use reference for construction material systems that are being developed for use in civil engineering.
Download or read book Optical Fiber Sensing and Structural Health Monitoring Technology written by Yanliang Du and published by Springer. This book was released on 2019-01-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on optical fiber sensing and structural health monitoring technologies. It provides detailed information on the basic theory of F-P optical fiber sensors, fiber Bragg grating sensors, fiber laser grating sensors and fully distributed optical fiber sensors. Drawing on the authors’ research achievements and many years of practical experience in the field of engineering structure health monitoring, the book elaborates on the structural principle, design and manufacture of optical fiber sensors and monitoring technologies, and briefly describes advances made with regard to multiple engineering structures.
Download or read book Advanced Topics in Characterization of Composites written by Michael R. Kessler and published by Trafford Publishing. This book was released on 2004 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
Download or read book Virtual and Rapid Manufacturing written by Ljubomir Tanchev and published by CRC Press. This book was released on 2007-09-17 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key
Download or read book Opto mechanical Fiber Optic Sensors written by Hamid Alemohammad and published by Butterworth-Heinemann. This book was released on 2018-01-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Opto-mechanical Fiber Optic Sensors: Research, Technology, and Applications in Mechanical Sensing offers comprehensive coverage of the theoretical aspects of fiber optic sensors (FOS), along with current and emerging applications in the mechanical, petroleum, biomedical, biomechanical, aerospace and automotive industries. Special attention is given to FOS applications in harsh environments. Due to recent technology advances, optical fibers have found uses in many industrial applications. Various sectors are major targets for FOS's capable of measuring mechanical parameters, such as pressure, stress, strain and temperature. Opto-mechanical FOS's offer unique advantages, including immunity to electromagnetic interference, high fidelity and signal-to-noise ratio, low-loss remote sensing and small size. - Provides current background information and fundamentals on fiber optic sensors technology - Covers a wide variety of established and emerging applications of FOS - Focuses on mechanical parameter measurement - Includes contributions from leading researchers and practitioners in their fields - Covers current methods of fabrication and packaging
Download or read book Identification of Damage Using Lamb Waves written by Zhongqing Su and published by Springer Science & Business Media. This book was released on 2009-09-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lamb waves are guided waves that propagate in thin plate or shell structures. There has been a clear increase of interest in using Lamb waves for identifying structural damage, entailing intensive research and development in this field over the past two decades. Now on the verge of maturity for diverse engineering applications, this emerging technique serves as an encouraging candidate for facilitating continuous and automated surveillance of the integrity of engineering structures in a cost-effective manner. In comparison with conventional nondestructive evaluation techniques such as ultrasonic scanning and radiography which have been well developed over half a century, damage identification using Lamb waves is in a stage of burgeoning development, presenting a number of technical challenges in application that need to be addressed and circumvented. It is these two aspects that have encouraged us to write this book, with the intention of consolidating the knowledge and know-how in the field of Lamb-wave-based damage identification, and of promoting widespread attention to mature application of this technique in the practical engineering sphere. This book provides a comprehensive description of key facets of damage identification technique using Lamb waves, based on the authors’ knowledge, comprehension and experience, ranging from fundamental theory through case studies to engineering applications.
Download or read book Sensing Issues in Civil Structural Health Monitoring written by Farhad Ansari and published by Springer Science & Business Media. This book was released on 2005-07-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil infrastructure systems are generally the most expensive assets in any country, and these systems are deteriorating at an alarming rate. In addition, these systems have a long service life in comparison to most other commercial products. As well, the introduction of intelligent materials and innovative design approaches in these systems is painfully slow due to heavy relianceon traditional construction and maintenance practices, and the conservative nature of design codes. Feedback on the "state of the health" of constructed systems is practically nonexistent. In the quest for lighter, stronger and corrosion-resistant structures, the replacement of ferrous materials by high-strength fibrous ones is being actively pursued in several countries around the world, both with respect to the design of new structures as well as for the rehabilitation and strengthening of existing ones. In North America, active research in the design of new highway bridges is focused on a number of specialty areas, including the replacement of steel reinforcing bars in concrete deck slabs by randomly distributed low-modulus fibers, and the replacement of steel prestressing cables for concrete components by tendons comprising super-strong fibers. Research is also being conducted on using FRPs to repair and strengthen existing structures.
Download or read book Structural Health Monitoring of Civil Infrastructure Systems written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2009-08-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring is an extremely important methodology in evaluating the 'health' of a structure by assessing the level of deterioration and remaining service life of civil infrastructure systems. This book reviews key developments in research, technologies and applications in this area of civil engineering. It discusses ways of obtaining and analysing data, sensor technologies and methods of sensing changes in structural performance characteristics. It also discusses data transmission and the application of both individual technologies and entire systems to bridges and buildings.With its distinguished editors and international team of contributors, Structural health monitoring of civil infrastructure systems is a valuable reference for students in civil and structural engineering programs as well as those studying sensors, data analysis and transmission at universities. It will also be an important source for practicing civil engineers and designers, engineers and researchers developing sensors, network systems and methods of data transmission and analysis, policy makers, inspectors and those responsible for the safety and service life of civil infrastructure. - Reviews key developments in research, technologies and applications - Discusses systems used to obtain and analyse data and sensor technologies - Assesses methods of sensing changes in structural performance
Download or read book Sensor Technologies for Civil Infrastructures written by Jerome P. Lynch and published by Woodhead Publishing. This book was released on 2022-07-19 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor Technologies for Civil Infrastructure, Volume 1: Sensing Hardware and Data Collection Methods for Performance Assessment, Second Edition, provides an overview of sensor hardware and its use in data collection. The first chapters provide an introduction to sensing for structural performance assessment and health monitoring, and an overview of commonly used sensors and their data acquisition systems. Further chapters address different types of sensor including piezoelectric transducers, fiber optic sensors, acoustic emission sensors, and electromagnetic sensors, and the use of these sensors for assessing and monitoring civil infrastructures. The new edition now includes chapters on machine learning methods and reliability analysis for structural health monitoring. All chapters have been revised to include the latest advances in materials (such as piezoelectric and mechanoluminescent materials), technologies (such as LIDAR), and applications. - Describes sensing hardware and data collection, covering a variety of sensors including LIDAR - Examines fiber optic systems, acoustic emission, piezoelectric sensors, electromagnetic sensors, terahertz technologies, ultrasonic methods, and radar and millimeter wave technology - Covers strain gauges, micro-electro-mechanical systems (MEMS), multifunctional materials and nanotechnology for sensing, and vision-based sensing and lasers - Includes new chapters on machine learning methods and reliability analysis
