Download or read book Proceedings of the 3rd International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power written by Matteo Pini and published by Springer Nature. This book was released on 2021-02-12 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of the main contributions from the third edition of the NICFD conference, organized by the Special Interest Group on Non-Ideal Compressible Fluid Dynamics (SIG-49). It provides insight on the latest research findings in the field of NICFD that are relevant to a number of engineering applications related to the conversion of renewable and waste energy sources, like organic Rankine cycles, supercritical CO2 cycle power plants, combustors operating with supercritical fluids, and heat pumps. The various chapters of the book document research encompassing theoretical, computational, and experimental aspects of the gas dynamics of non-ideal reactive and non-reactive flows and their impact for the design of internal flow components (turbomachinery, heat exchangers, combustors). Since the accurate calculation of fluid thermo-physical properties is of great concern in NICFD, all the chapters address this problem by describing state-of-the-art models for the characterization of the properties of pure fluids and mixtures.
Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2022-07-15 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants, second edition, provides a fully revised and updated comprehensive review of steam turbine design, optimization, analysis and measurement. Editor Tadashi Tanuma and his team of expert contributors from around the globe have updated each chapter to reflect the latest research and experiences in the field, to help progress thermal power generation to meet sustainability goals. This book presents modern technologies for the design and development of steam turbines that supply affordable, reliable and stable power with much lower CO2 emissions. With the addition of two new chapters on 'Steam turbine mechanical design and analysis for high temperature, large and rapid change of temperature conditions' and 'Steam valves with low pressure losses' this edition will support students, researchers and professional engineers in designing and developing their own economical and environmentally concerned thermal power plants. - Fully updated to include the latest research and examples from around the globe - Includes brand new chapters, case studies, photographs, data, analysis and models - Chapters on the design and development of Steam Turbines are written by experienced design engineers who provide first-hand experience and lessons learned.
Download or read book Modeling of Turbomachines for Control and Diagnostic Applications written by Igor Loboda and published by BoD – Books on Demand. This book was released on 2020-05-27 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new studies in the area of turbomachine mathematical modeling with a focus on models applied to developing engine control and diagnostic systems. The book contains one introductory and four main chapters. The introductory chapter describes the area of modeling of gas and wind turbines and shows the demand for further improvement of the models. The first three main chapters offer particular improvements in gas turbine modeling. First, a novel methodology for the modeling of engine starting is presented. Second, a thorough theoretical comparative analysis is performed for the models of engine internal gas capacities, and practical recommendations are given on model applications, in particular for engine control purposes. Third, multiple algorithms for calculating important unmeasured parameters for engine diagnostics are proposed and compared. It is proven that the best algorithms allow accurate prognosis of engine remaining lifetime.The field of wind turbine modeling is presented in the last main chapter. It introduces a general-purpose model that describes both aerodynamic and electric parts of a wind power plant. Such a detailed physics-based model will help with the development of more accurate control and diagnostic systems.In this way, this book includes four new studies in the area of gas and wind turbine modeling. These studies will be interesting and useful for specialists in turbine engine control and diagnostics.
Download or read book Print Proceedings of the ASME Turbo Expo 2015 written by American Society of and published by . This book was released on 2015-11 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed collection on 60 full-length, peer-reviewed technical papers. Topics include: Heat Transfer: Film Cooling, Heat Transfer: General Heat Transfer.
Download or read book EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization written by H.C. Rodrigues and published by Springer. This book was released on 2018-09-13 with total page 1486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume focus on the following topics: design optimization and inverse problems, numerical optimization techniques,efficient analysis and reanalysis techniques, sensitivity analysis and industrial applications. The conference EngOpt brings together engineers, applied mathematicians and computer scientists working on research, development and practical application of optimization methods in all engineering disciplines and applied sciences.
Download or read book Proceedings of the 11th IFToMM International Conference on Rotordynamics written by Fulei Chu and published by Springer Nature. This book was released on 2023-08-26 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 11th IFToMM International Conference on Rotordynamics, held in Beijing, China on 18-21 September 2023. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, this conference has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.
Download or read book Advanced technologies in flow dynamics and combustion in propulsion and power volume II written by Lei Luo and published by Frontiers Media SA. This book was released on 2023-02-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Print Proceedings of the ASME Turbo Expo 2015 written by American Society of and published by . This book was released on 2015-11 with total page 1716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed collection of full-length, peer-reviewed technical papers. Topics include: Combustion, Fuels and Emissions.
Download or read book Design Optimization of Fluid Machinery written by Kwang-Yong Kim and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses aktuelle Referenzwerk behandelt numerische Optimierungsmethoden für Strömungsmaschinen und die wichtigsten industriellen Anwendungen. Grundlagen sind umfangreiche Forschung und Erfahrung der Autoren. Die logischen Zusammenhänge, um den Bereich der numerischen Strömungssimulation (CFD) zu verstehen, werden anhand der Grundlagen der Strömungsmechanik, von Strömungsmaschinen und ihrer Komponenten erläutert. Im Anschluss folgt eine Einführung in Methoden der Ein- und Mehrzieloptimierung, die automatische Optimierung, in Ersatzmodelle und Entwicklungsalgorithmen. Das Fachbuch schließt mit der ausführlichen Erklärung von Designansätzen und Anwendungen für Pumpen, Turbinen, Kompressoren und weiteren Systemen von Strömungsmaschinen. Der Nachdruck liegt hier bei Systemen für erneuerbare Energien. - Die Autoren sind führende Experten des Fachgebiets. - Ein handliches Fachbuch zu Optimierungsmethoden mittels numerischer Strömungssimulation bei Strömungsmaschinen. - Beschreibt wichtige Anwendungsbereiche in der Industrie und enthält Kapitel zu Systemen für erneuerbaren Energien. Design Optimization of Fluid Machinery ist ein wichtiger Leitfaden für Graduierte, Forscher und Ingenieure aus den Bereichen Strömungsmaschinen und zugehörige Optimierungsmethoden. Als Fachbuch mit allem Wissenswerten zu dem Thema richtet es sich an Studenten höherer Semester der Fachrichtungen Maschinenbau und verwandter Bereiche der Strömungssimulation und Luft-/Raumfahrttechnik.
Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-07-11 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.
Download or read book Proceedings of the 2nd International Conference on Green Energy Conversion System written by Adel Mellit and published by Springer Nature. This book was released on with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.
Download or read book Gas Turbine Parameter Corrections written by Allan J. Volponi and published by Springer Nature. This book was released on 2020-02-29 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume provides an exhaustive catalog of common standard day corrections for gas turbine gas path parameters, explores their history, and, most importantly, provides a mathematical framework for the derivation of these important normalization factors. Although use of these corrections is common practice within industry, government, and academia, their genesis, and, in particular, how they can be derived from simple principles, is not general knowledge among many of those who use them on a regular basis. This book elucidates calculation of these important coefficients. Standing as a one-stop source on derivations and a methodology for additional parameter correction refinements, Gas Turbine Parameter Corrections, is ideal as a desk reference for practitioners and researchers, as well as supplemental instruction for university courses on gas turbine performance, control, and DPHM (diagnostics, prognostics and health management).
Download or read book 14th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2020-09-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.
Download or read book Recent Advances in Carbon Capture and Storage written by Yongseung Yun and published by BoD – Books on Demand. This book was released on 2017-03-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon capture and storage (CCS) has been considered as a practical way in sequestering the huge anthropogenic CO2 amount with a reasonable cost until a more pragmatic solution appears. The CCS can work as a bridge before fulfilling the no-CO2 era of the future by applying to large-scale CO2 emitting facilities. But CCS appears to lose some passion by the lack of progress in technical developments and in commercial success stories other than EOR. This is the time to go back to basics, starting from finding a solution in small steps. The CCS technology desperately needs far newer ideas and breakthroughs that can overcome earlier attempts through improving, modifying, and switching the known principles. This book tries to give some insight into developing an urgently needed technical breakthrough through the recent advances in CCS research, in addition to the available small steps like soil carbon sequestration. This book provides the fundamental and practical information for researchers and graduate students who want to review the current technical status and to bring in new ideas to the conventional CCS technologies.
Download or read book Real Time Optimization written by Dominique Bonvin and published by MDPI. This book was released on 2018-07-05 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Real-Time Optimization" that was published in Processes
