Download or read book Proceedings of the ASME Turbo Expo 2009 Microturbines and small turbomachinery Oil and gas applications written by and published by American Society of Mechanical Engineers. This book was released on 2009-01-01 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: .".. power for land, sea and air."--cover.
Download or read book Proceedings of ASME Turbo Expo 2022 Turbomachinery Technical Conference and Exposition GT2022 Volume 7 written by ASME and published by . This book was released on 2022-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 74 papers covering Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; and Oil%Gas Applications
Download or read book Proceedings of the ASME Turbo Expo 2008 written by ASME International Gas Turbine Institute and published by Amer Society of Mechanical. This book was released on 2008-01-01 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 102 full-length, peer-reviewed technical papers. It covers such topics as: Aircraft Engine; Ceramics; Coal, Biomass and Alternative Fuels; Combustion, Fuels and Emissions; Controls, Diagnostics and Instrumentation; Cycle Innovations; Education; Electric Power; and, Heat Transfer - General Interest.
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Small Scale Energy Systems with Gas Turbines and Heat Pumps written by Satoru Okamoto and published by MDPI. This book was released on 2021-03-29 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: A heat pump system can produce an amount of heat energy that is greater than the amount of energy used to run the heat pump system. Thus, a heat pump system is considered to be a machine system that can use energies efficiently, as is the load leveling air-conditioning system utilizing unutilized energies at high levels. Adaptations of gas turbines for industrial, utility, and marine-propulsion applications have long been accepted as means for generating power with high efficiency and ease of maintenance. Cogeneration with gas turbine is frequently defined as the sequential production of useful thermal energy and shaft power from a single energy source. For applications that generate electricity, the power can either be used internally or supplied to the utility grid. This Special Issue intends to provide an overviews of the existing knowledge related with various aspects of “Small-Scale Energy Systems with Gas Turbines and Heat Pumps”, and contributions on, but not limited to the following subjects were encouraged: wake of stator vane to improve sealing effectiveness; gas turbine cycle with external combustion chamber for prosumer and distributed energy systems; computational simulation of gas turbine engine operating with different blends of biodiesel; experimental methodology and facility for the engine performance and emissions evaluation using jet and biodiesel blends; experimental analysis of an air heat pump for heating service; hybrid fuel cell-Brayton cycle for combined heat and power; design analysis of micro gas turbines in closed cycles. Seven papers were published in the Special Issue out of a total of 12 submitted.
Download or read book Industrial Gas Turbines written by A M Y Razak and published by Elsevier. This book was released on 2007-10-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Gas Turbines: Performance and Operability explains important aspects of gas turbine performance such as performance deterioration, service life and engine emissions. Traditionally, gas turbine performance has been taught from a design perspective with insufficient attention paid to the operational issues of a specific site. Operators are not always sufficiently familiar with engine performance issues to resolve operational problems and optimise performance.Industrial Gas Turbines: Performance and Operability discusses the key factors determining the performance of compressors, turbines, combustion and engine controls. An accompanying engine simulator CD illustrates gas turbine performance from the perspective of the operator, building on the concepts discussed in the text. The simulator is effectively a virtual engine and can be subjected to operating conditions that would be dangerous and damaging to an engine in real-life conditions. It also deals with issues of engine deterioration, emissions and turbine life. The combined use of text and simulators is designed to allow the reader to better understand and optimise gas turbine operation. - Discusses the key factors in determining the perfomance of compressors, turbines, combustion and engine controls - Explains important aspects of gas and turbine perfomance such as service life and engine emissions - Accompanied by CD illustrating gas turbine performance, building on the concepts discussed in the text
Download or read book Fluid Mechanics and Turbomachinery written by Bijay K Sultanian and published by CRC Press. This book was released on 2021-07-21 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes over 250 solved problems to supplement graduate-level courses in fluid mechanics and turbomachinery. Enables students to practice applying key concepts of fluid mechanics and the governing conservation laws to solve real-world problems. Uses the physics-first approach, allowing for a good understanding of the problem physics and the results obtained. Covers problems on flowpath aerodynamics design. Covers problems on secondary air systems modeling of gas turbines.
Download or read book Gas Turbines written by Bijay Sultanian and published by Cambridge University Press. This book was released on 2018-09-13 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This physics-first, design-oriented textbook explains concepts of gas turbine secondary flows, reduced-order modeling methods, and 3-D CFD.
Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book Sustainable Energy Technology and Policies written by Sudipta De and published by Springer. This book was released on 2017-12-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art compilation focusing on both technological and policy aspects of sustainable energy production and consumption, which deals with issues like the need for and planning of smart cities, alternative transport fuel options, sustainable power production, pollution control technologies etc. The book comprises contributions from experts from all over the world, and addresses energy sustainability from different viewpoints. Specifically, the book focuses on energy sustainability in the Indian scenario with a background of the global perspective. Contributions from academia, policy makers and industry are included to address the challenge from different perspectives. The contents of this book will prove useful to researchers, professionals, and policy makers working in the area of green and sustainable energy.
Download or read book Gas Turbine Power Generation written by Paul Breeze and published by Academic Press. This book was released on 2016-02-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Turbine Power Generation is a concise, up-to-date, and readable guide providing an introduction to gas turbine power generation technology. It includes detailed descriptions of gas fired generation systems, demystifies the functions of gas fired technology, and explores the economic and environmental risk factors Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide that will help them establish a reliable power supply as they also account for both social and economic objectives. - Provides a concise, up-to-date, and readable guide on gas turbine power generation technology - Focuses on the evolution of gas-fired power generation using gas turbines - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations
Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control written by Bo Huang and published by Springer. This book was released on 2016-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as intelligent micro-grids, new energy vehicles, and the Internet of Things.
Download or read book Protection of Steam Turbine Disk Wheels from Axial Vibration written by Wilfred Campbell and published by . This book was released on 1924 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
