Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-18 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This third volume covers the following main topics: dynamic analysis and stability; electromechanical interactions in rotordynamics; nonlinear phenomena in rotordynamics; rotordynamics of micro, nano and cryogenic machines; and fluid structure interactions in rotordynamics.

Download or read book Gas Turbines written by Gurrappa Injeti and published by BoD – Books on Demand. This book was released on 2010-09-27 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide valuable information for the analysis and design of various gas turbine engines for different applications. The target audience for this book is design, maintenance, materials, aerospace and mechanical engineers. The design and maintenance engineers in the gas turbine and aircraft industry will benefit immensely from the integration and system discussions in the book. The chapters are of high relevance and interest to manufacturers, researchers and academicians as well.

Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2022-07-15 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants, second edition, provides a fully revised and updated comprehensive review of steam turbine design, optimization, analysis and measurement. Editor Tadashi Tanuma and his team of expert contributors from around the globe have updated each chapter to reflect the latest research and experiences in the field, to help progress thermal power generation to meet sustainability goals. This book presents modern technologies for the design and development of steam turbines that supply affordable, reliable and stable power with much lower CO2 emissions. With the addition of two new chapters on 'Steam turbine mechanical design and analysis for high temperature, large and rapid change of temperature conditions' and 'Steam valves with low pressure losses' this edition will support students, researchers and professional engineers in designing and developing their own economical and environmentally concerned thermal power plants. - Fully updated to include the latest research and examples from around the globe - Includes brand new chapters, case studies, photographs, data, analysis and models - Chapters on the design and development of Steam Turbines are written by experienced design engineers who provide first-hand experience and lessons learned.

Download or read book Efficiency Performance and Robustness of Gas Turbines written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of issues related to analysis of gas turbines and their engineering applications are considered in the book. Analytical and experimental methods are employed to identify failures and quantify operating conditions and efficiency of gas turbines. Gas turbine engine defect diagnostic and condition monitoring systems, operating conditions of open gas turbines, reduction of jet mixing noise, recovery of exhaust heat from gas turbines, appropriate materials and coatings, ultra micro gas turbines and applications of gas turbines are discussed. The open exchange of scientific results and ideas will hopefully lead to improved reliability of gas turbines.

Download or read book Advances in Gas Turbine Technology written by Ernesto Benini and published by BoD – Books on Demand. This book was released on 2011-11-04 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbine engines will still represent a key technology in the next 20-year energy scenarios, either in stand-alone applications or in combination with other power generation equipment. This book intends in fact to provide an updated picture as well as a perspective vision of some of the major improvements that characterize the gas turbine technology in different applications, from marine and aircraft propulsion to industrial and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into five main sections including 21 chapters overall: (I) Aero and Marine Gas Turbines, (II) Gas Turbine Systems, (III) Heat Transfer, (IV) Combustion and (V) Materials and Fabrication.

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Modern Gas Turbine Systems written by Peter Jansohn and published by Elsevier. This book was released on 2013-08-31 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering.The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility.Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. - Provides a comprehensive review of gas turbine systems and fundamentals of a cycle - Examines the major components of modern systems, including compressors, combustors and turbines - Discusses the operation and maintenance of component parts

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Progress in Gas Turbine Performance written by Ernesto Benini and published by BoD – Books on Demand. This book was released on 2013-06-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been a remarkable difference in the research and development regarding gas turbine technology for transportation and power generation. The former remains substantially florid and unaltered with respect to the past as the superiority of air-breathing engines compared to other technologies is by far immense. On the other hand, the world of gas turbines (GTs) for power generation is indeed characterized by completely different scenarios in so far as new challenges are coming up in the latest energy trends, where both a reduction in the use of carbon-based fuels and the raising up of renewables are becoming more and more important factors. While being considered a key technology for base-load operations for many years, modern stationary gas turbines are in fact facing the challenge to balance electricity from variable renewables with that from flexible conventional power plants. The book intends in fact to provide an updated picture as well as a perspective view of some of the abovementioned issues that characterize GT technology in the two different applications: aircraft propulsion and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into three main sections including 10 chapters overall: (i) Gas Turbine and Component Performance, (ii) Gas Turbine Combustion and (iii) Fault Detection in Systems and Materials.

Download or read book GPU Solutions to Multi scale Problems in Science and Engineering written by David A. Yuen and published by Springer Science & Business Media. This book was released on 2013-01-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the new topic of GPU computing with many applications involved, taken from diverse fields such as networking, seismology, fluid mechanics, nano-materials, data-mining , earthquakes ,mantle convection, visualization. It will show the public why GPU computing is important and easy to use. It will offer a reason why GPU computing is useful and how to implement codes in an everyday situation.

Download or read book AEROTECH IV written by Renuganth Varatharajoo and published by Trans Tech Publications Ltd. This book was released on 2012-11-29 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Aerospace Technologies Selected, peer reviewed papers from the AEROTECH IV, 21-22 November, 2012, Kuala Lumpur, Malaysia

Download or read book Approaches for Clean Combustion in Gas Turbines written by Medhat A. Nemitallah and published by Springer Nature. This book was released on 2020-03-24 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of novel combustion approaches and burner designs for clean power generation in gas turbines. It shows the reader how to control the release of pollutants to the environment in an effort to reduce global warming. After an introduction to global warming issues and clean power production for gas turbine applications, subsequent chapters address premixed combustion, burner designs for clean power generation, gas turbine performance, and insights on gas turbine operability. Given its scope, the book can be used as a textbook for graduate-level courses on clean combustion, or as a reference book to accompany compact courses for mechanical engineers and young researchers around the world.

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Download or read book Integrated Computer Technologies in Mechanical Engineering 2023 written by Mykola Nechyporuk and published by Springer Nature. This book was released on with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book History of Rotating Machinery Dynamics written by J.S. Rao and published by Springer Science & Business Media. This book was released on 2011-03-07 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with the invention of the wheel nearly 5000 years ago, and via Archimedes, Aristotle and Hero describes the first practical applications such as water wheels and grinding wheels, pushing on to more rigorous scientific research by inquiring minds such as Leonardo da Vinci and Copernicus in later ages. Newton and Leibniz followed, and beam structures received maximum attention three centuries ago. As focus shifts and related disciplines such as mathematics and physics also develop, slowly turbomachines and rotor and blade dynamics as we know the subject now take shape. While the book traces the events leading to Laval and Parsons Turbines, the emphasis is on rotor and blade dynamics aspects that pushed these turbines to their limits in the last century. The tabular and graphical methods developed in the pre-computer era have taken different form in the last fifty years through finite element methods. The methods evolved in the last century are discussed in detail to help modern day designers and researchers. This book will be useful to young researchers and engineers in industry and educational institutions engaged in rotor and blade dynamics work in understanding the past and the present developments and what is expected in future. Faculty and industry engineers can benefit from this broad perspective history in formulating their developmental plans.

Download or read book Selected Problems in Fluid Flow and Heat Transfer written by Artur J. Jaworski and published by MDPI. This book was released on 2019-09-20 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.