Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.

Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 2022-10-21 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer, Volume 54 in this comprehensive series, highlights new advances in the field, with this new volume presenting interesting chapter written by an international board of authors. Updates to this new release include chapters on Thermal Convection Studies at the University of Minnesota and Turbulent passive scalar transport in smooth wall-bounded flows: recent advances. - Includes the authority and expertise of leading contributors from an international board of authors - Presents the latest release in Advances in Heat Transfer series - Provides a comprehensive approach, highlighting new advances in the field

Download or read book Proceedings of the 2003 ASME Summer Heat Transfer Conference written by and published by . This book was released on 2003 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Center Handbook written by Hwaiyu Geng and published by John Wiley & Sons. This book was released on 2014-12-22 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the fundamentals, technologies, and best practices in designing, constructing and managing mission critical, energy efficient data centers Organizations in need of high-speed connectivity and nonstop systems operations depend upon data centers for a range of deployment solutions. A data center is a facility used to house computer systems and associated components, such as telecommunications and storage systems. It generally includes multiple power sources, redundant data communications connections, environmental controls (e.g., air conditioning, fire suppression) and security devices. With contributions from an international list of experts, The Data Center Handbook instructs readers to: Prepare strategic plan that includes location plan, site selection, roadmap and capacity planning Design and build "green" data centers, with mission critical and energy-efficient infrastructure Apply best practices to reduce energy consumption and carbon emissions Apply IT technologies such as cloud and virtualization Manage data centers in order to sustain operations with minimum costs Prepare and practice disaster reovery and business continuity plan The book imparts essential knowledge needed to implement data center design and construction, apply IT technologies, and continually improve data center operations.

Download or read book Natural Convective Heat Transfer from Short Inclined Cylinders written by Patrick H. Oosthuizen and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Convective Heat Transfer from Short Inclined Cylinders examines a heat transfer situation of significant, practical importance not adequately dealt with in existing textbooks or in any widely available review papers. Specifically, the book introduces the reader to recent studies of natural convection from short cylinders mounted on a flat insulated base where there is an “exposed” upper surface. The author considers the effects of the cylinder cross-sectional shape, the cylinder inclination angle, and the length-to-cross sectional size of the cylinder. Both numerical and experimental studies are discussed and correlation equations based on the results of these studies are reviewed. This book is ideal for professionals involved with thermal management and related systems, researchers, and graduate students in the field of natural convective heat transfer, instructors in graduate level courses in convective heat transfer.

Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2013-02-20 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Radiative Heat Transfer describes the basic physics of radiation heat transfer. The book provides models, methodologies, and calculations essential in solving research problems in a variety of industries, including solar and nuclear energy, nanotechnology, biomedical, and environmental. Every chapter of Radiative Heat Transfer offers uncluttered nomenclature, numerous worked examples, and a large number of problems—many based on real world situations—making it ideal for classroom use as well as for self-study. The book's 24 chapters cover the four major areas in the field: surface properties; surface transport; properties of participating media; and transfer through participating media. Within each chapter, all analytical methods are developed in substantial detail, and a number of examples show how the developed relations may be applied to practical problems. - Extensive solution manual for adopting instructors - Most complete text in the field of radiative heat transfer - Many worked examples and end-of-chapter problems - Large number of computer codes (in Fortran and C++), ranging from basic problem solving aids to sophisticated research tools - Covers experimental methods

Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

Download or read book Thermal Management for Opto electronics Packaging and Applications written by Xiaobing Luo and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.

Download or read book Heat Exchangers written by Jovan Mitrovic and published by BoD – Books on Demand. This book was released on 2012-03-09 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selecting and bringing together matter provided by specialists, this project offers comprehensive information on particular cases of heat exchangers. The selection was guided by actual and future demands of applied research and industry, mainly focusing on the efficient use and conversion energy in changing environment. Beside the questions of thermodynamic basics, the book addresses several important issues, such as conceptions, design, operations, fouling and cleaning of heat exchangers. It includes also storage of thermal energy and geothermal energy use, directly or by application of heat pumps. The contributions are thematically grouped in sections and the content of each section is introduced by summarising the main objectives of the encompassed chapters. The book is not necessarily intended to be an elementary source of the knowledge in the area it covers, but rather a mentor while pursuing detailed solutions of specific technical problems which face engineers and technicians engaged in research and development in the fields of heat transfer and heat exchangers.

Download or read book Heat Transport in Micro and Nanoscale Thin Films written by Bekir Sami Yilbas and published by Elsevier. This book was released on 2017-08-23 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transport in Micro- and Nanoscale Thin Films presents aspects and applications of the principle methods of heat transport in relation to nanoscale films. Small-scale parts and thin films are widely used in the electronics industry. However, the drastic change in the thermal conductivity with reducing device size and film thickness modifies the energy transport by heat-carrying phonons in the film. Energy transfer in small-sized devices and thin films deviate from the classical diffusion to radiative transport. This book deals with micro/nano scale heat transfer in small scale devices and the thin films, including interface properties of cross-plane transport. The book fills the gap between applications of the physical fundamentals and energy transport at the micro- and nano scale, which will be valuable for academics, researchers and students in the fields of materials science and energy transport. - Offers a specialist focus on nanoscale thin films, allowing the reader to create more efficient heat transfer systems - Includes in-depth coverage of the formulation of transient energy transport for short durations of heating, which is valuable those working in electronics - Focuses on applications and real-life case studies to clearly illustrate how the theories explained in the book can be used in industry

Download or read book Thermal Radiation Heat Transfer written by John R. Howell and published by CRC Press. This book was released on 2015-09-18 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the Radiative Exchange between Surfaces Further expanding on the changes made to the fifth edition, Thermal Radiation Heat Transfer, 6th Edition continues to highlight the relevance of thermal radiative transfer and focus on concepts that develop the radiative transfer equation (RTE). The book explains the fundamentals of radiative transfer, introduces the energy and radiative transfer equations, covers a variety of approaches used to gauge radiative heat exchange between different surfaces and structures, and provides solution techniques for solving the RTE. What’s New in the Sixth Edition This revised version updates information on properties of surfaces and of absorbing/emitting/scattering materials, radiative transfer among surfaces, and radiative transfer in participating media. It also enhances the chapter on near-field effects, addresses new applications that include enhanced solar cell performance and self-regulating surfaces for thermal control, and updates references. Comprised of 17 chapters, this text: Discusses the fundamental RTE and its simplified forms for different medium properties Presents an intuitive relationship between the RTE formulations and the configuration factor analyses Explores the historical development and the radiative behavior of a blackbody Defines the radiative properties of solid opaque surfaces Provides a detailed analysis and solution procedure for radiation exchange analysis Contains methods for determining the radiative flux divergence (the radiative source term in the energy equation) Thermal Radiation Heat Transfer, 6th Edition explores methods for solving the RTE to determine the local spectral intensity, radiative flux, and flux gradient. This book enables you to assess and calculate the exchange of energy between objects that determine radiative transfer at different energy levels.

Download or read book Natural Convective Heat Transfer from Narrow Plates written by Patrick H. Oosthuizen and published by Springer Science & Business Media. This book was released on 2012-08-31 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Convective Heat Transfer from Narrow Plates deals with a heat transfer situation that is of significant practical importance but which is not adequately dealt with in any existing textbooks or in any widely available review papers. The aim of the book is to introduce the reader to recent studies of natural convection from narrow plates including the effects of plate edge conditions, plate inclination, thermal conditions at the plate surface and interaction of the flows over adjacent plates. Both numerical and experimental studies are discussed and correlation equations based on the results of these studies are reviewed.

Download or read book Flow Boiling of a Dilute Emulsion In Smooth and Rough Microgaps written by Brandon M. Shadakofsky and published by Springer Nature. This book was released on 2023-03-24 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates heat transfer behavior for boiling of dilute emulsions- mixtures of two immiscible fluids- which has received little attention to date. Of the work completed in this area, the majority has been focused on pool boiling where no mean flow is present, and this book is the first major work to be published regarding flow boiling of emulsions. The book includes a comprehensive review and assessment of research on emulsion-based heat transfer. Recent experiments are reported and analyzed to characterize heat transfer in microgap flow boiling via a systematic investigation into the effects of gap size, mass flux, and volume fraction on the heat transfer coefficient and pressure drop. The emulsion used in all experiments comprises droplets of an immiscible electronics cooling fluid suspended in water. The volume provides a complete baseline for flow boiling of water in the microgaps, enabling a determination of the enhancement of the heat transfer coefficient when the disperse component is present. Moreover, a subset of the data set pertains to flow boiling of dilute emulsions over microporous surfaces. The flow conditions for which the microporous surfaces enhance or degrade heat transfer are presented. Finally, this book provides a discussion of the physical phenomena which affect boiling and a set of nondimensional numbers that can be used for correlation.

Download or read book Microfluidics and Nanofluidics Handbook written by Sushanta K. Mitra and published by CRC Press. This book was released on 2011-09-20 with total page 1103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook presents fundamental aspects, fabrication techniques, introductory materials on microbiology and chemistry, measurement techniques, and applications of microfluidics and nanofluidics. The first volume of the handbook focuses on physics and transport phenomena along with life sciences and related applications. It provides newcomers with the fundamental science background required for the study of microfluidics and nanofluidics. In addition, the advanced techniques and concepts described in the text will benefit experienced researchers and professionals.

Download or read book Turbulence in Porous Media written by Marcelo J.S. de Lemos and published by Elsevier. This book was released on 2012-11-15 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence in Porous Media introduces the reader to the characterisation of turbulent flow, heat and mass transfer in permeable media, including analytical data and a review of available experimental data. Such transport processes occurring a relatively high velocity in permeable media are present in a number of engineering and natural flows. This new edition features a completely updated text including two new chapters exploring Turbulent Combustion and Moving Porous Media. De Lemos has expertly brought together a text that compiles, details, compares and evaluates available methodologies for modelling and simulating flow, providing an essential tour for engineering students working within the field as well as those working in chemistry, physics, applied mathematics, and geological and environmental sciences. - Brings together groundbreaking and complex research on turbulence in porous media - Extends the original model to situations including reactive systems - Now discusses movement of the porous matrix

Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.

Download or read book Nanoparticle Heat Transfer and Fluid Flow written by W. J. Minkowycz and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions by leading researchers in the field, Nanoparticle Heat Transfer and Fluid Flow explores heat transfer and fluid flow processes in nanomaterials and nanofluids, which are becoming increasingly important across the engineering disciplines. The book covers a wide range, from biomedical and energy conversion applications to mate