Download or read book Proceedings of the ASME Conference on Smart Materials Adaptive Structures and Intelligent Systems 2009 written by and published by . This book was released on 2009 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 81 full-length, peer-reviewed technical papers that covers such topics as: Bio-inspired Smart Materials and Structures; Enabling Technologies and Integrated System Design; Multifunctional Materials; and, Structural Health Monitoring/NDE.

Download or read book Handbook of Batteries and Fuel Cells written by David Linden and published by McGraw-Hill Companies. This book was released on 1984 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Materials and Structures written by M.V. Gandhi and published by Springer Science & Business Media. This book was released on 1992-05-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the embryonic field of smart materials and structures, and also presents a state-of-the-art review of the sub-disciplines of the field. It informs readers of the technical challenges to the commercialisation of products incorporating these material technologies.

Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.

Download or read book Bioinspired Structures and Design written by Wole Soboyejo and published by Cambridge University Press. This book was released on 2020-09-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master simple to advanced biomaterials and structures with this essential text. Featuring topics ranging from bionanoengineered materials to bio-inspired structures for spacecraft and bio-inspired robots, and covering issues such as motility, sensing, control and morphology, this highly illustrated text walks the reader through key scientific and practical engineering principles, discussing properties, applications and design. Presenting case studies for the design of materials and structures at the nano, micro, meso and macro-scales, and written by some of the leading experts on the subject, this is the ideal introduction to this emerging field for students in engineering and science as well as researchers.

Download or read book Smart Intelligent Aircraft Structures SARISTU written by Piet Christof Wölcken and published by Springer. This book was released on 2015-09-04 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.

Download or read book Adaptive Structures written by David Wagg and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive structures have the ability to adapt, evolve or change their properties or behaviour in response to the environment around them. The analysis and design of adaptive structures requires a highly multi-disciplinary approach which includes elements of structures, materials, dynamics, control, design and inspiration taken from biological systems. Development of adaptive structures has been taking place in a wide range of industrial applications, but is particularly advanced in the aerospace and space technology sector with morphing wings, deployable space structures; piezoelectric devices and vibration control of tall buildings. Bringing together some of the foremost world experts in adaptive structures, this unique text: includes discussions of the application of adaptive structures in the aerospace, military, civil engineering structures, automotive and MEMS. presents the impact of biological inspiration in designing adaptive structures, particularly the use of hierarchy in nature, which typically induces multi-functional behavior. sets the agenda for future research in adaptive structures in one distinctive single volume. Adaptive Structures: Engineering Applications is essential reading for engineers and scientists working in the fields of intelligent materials, structural vibration, control and related smart technologies. It will also be of interest to senior undergraduate and postgraduate research students as well as design engineers working in the aerospace, mechanical, electrical and civil engineering sectors.

Download or read book Future of solar photovoltaic written by International Renewable Energy Agency IRENA and published by International Renewable Energy Agency (IRENA). This book was released on 2019-11-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study presents options to fully unlock the world’s vast solar PV potential over the period until 2050. It builds on IRENA’s global roadmap to scale up renewables and meet climate goals.

Download or read book Morphing Wing Technologies written by Sergio Ricci and published by Butterworth-Heinemann. This book was released on 2017-10-27 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Morphing Wings Technologies: Large Commercial Aircraft and Civil Helicopters offers a fresh look at current research on morphing aircraft, including industry design, real manufactured prototypes and certification. This is an invaluable reference for students in the aeronautics and aerospace fields who need an introduction to the morphing discipline, as well as senior professionals seeking exposure to morphing potentialities. Practical applications of morphing devices are presented—from the challenge of conceptual design incorporating both structural and aerodynamic studies, to the most promising and potentially flyable solutions aimed at improving the performance of commercial aircraft and UAVs. Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing mission environment during flight. The book consists of eight sections as well as an appendix which contains both updates on main systems evolution (skin, structure, actuator, sensor, and control systems) and a survey on the most significant achievements of integrated systems for large commercial aircraft. - Provides current worldwide status of morphing technologies, the industrial development expectations, and what is already available in terms of flying systems - Offers new perspectives on wing structure design and a new approach to general structural design - Discusses hot topics such as multifunctional materials and auxetic materials - Presents practical applications of morphing devices

Download or read book Damage Assessment of Structures written by Michael D. Gilchrist and published by Trans Tech Publications Ltd. This book was released on 1999-06-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: DAMAS 1999 Proceedings of the International Conference on Damage Assessment of Structures (DAMAS 99), held in Dublin, Ireland, June 28-30, 1999

Download or read book Metaheuristic Applications in Structures and Infrastructures written by Mohammed Ghasem Sahab and published by Elsevier Inc. Chapters. This book was released on 2013-01-31 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Global Technology Revolution 2020 In Depth Analyses Bio Nano Materials Information Trends Drivers Barriers and Social Implications written by Richard Silberglitt and published by Rand Corporation. This book was released on 2002-08-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2020, areas of particular importance for technology trends will include biotechnology, nanotechnology, materials technology, and information technology. This report, the companion document to The Global Technology Revolution 2020, Executive Summary (Silberglitt et al., MG-475-NIC, 2006), assesses in detail a sample of 29 countries with respect to their ability to acquire and implement 16 key technology applications.

Download or read book Advances in Production Management Systems The Path to Intelligent Collaborative and Sustainable Manufacturing written by Hermann Lödding and published by Springer. This book was released on 2017-08-28 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.

Download or read book Vision and Voyages for Planetary Science in the Decade 2013 2022 written by National Research Council and published by National Academies Press. This book was released on 2012-01-30 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, planetary science has seen a tremendous growth in new knowledge. Deposits of water ice exist at the Moon's poles. Discoveries on the surface of Mars point to an early warm wet climate, and perhaps conditions under which life could have emerged. Liquid methane rain falls on Saturn's moon Titan, creating rivers, lakes, and geologic landscapes with uncanny resemblances to Earth's. Vision and Voyages for Planetary Science in the Decade 2013-2022 surveys the current state of knowledge of the solar system and recommends a suite of planetary science flagship missions for the decade 2013-2022 that could provide a steady stream of important new discoveries about the solar system. Research priorities defined in the report were selected through a rigorous review that included input from five expert panels. NASA's highest priority large mission should be the Mars Astrobiology Explorer Cacher (MAX-C), a mission to Mars that could help determine whether the planet ever supported life and could also help answer questions about its geologic and climatic history. Other projects should include a mission to Jupiter's icy moon Europa and its subsurface ocean, and the Uranus Orbiter and Probe mission to investigate that planet's interior structure, atmosphere, and composition. For medium-size missions, Vision and Voyages for Planetary Science in the Decade 2013-2022 recommends that NASA select two new missions to be included in its New Frontiers program, which explores the solar system with frequent, mid-size spacecraft missions. If NASA cannot stay within budget for any of these proposed flagship projects, it should focus on smaller, less expensive missions first. Vision and Voyages for Planetary Science in the Decade 2013-2022 suggests that the National Science Foundation expand its funding for existing laboratories and establish new facilities as needed. It also recommends that the program enlist the participation of international partners. This report is a vital resource for government agencies supporting space science, the planetary science community, and the public.

Download or read book Smart Material Systems and MEMS written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting unified coverage of the design and modeling of smart micro- and macrosystems, this book addresses fabrication issues and outlines the challenges faced by engineers working with smart sensors in a variety of applications. Part I deals with the fundamental concepts of a typical smart system and its constituent components. Preliminary fabrication and characterization concepts are introduced before design principles are discussed in detail. Part III presents a comprehensive account of the modeling of smart systems, smart sensors and actuators. Part IV builds upon the fundamental concepts to analyze fabrication techniques for silicon-based MEMS in more detail. Practicing engineers will benefit from the detailed assessment of applications in communications technology, aerospace, biomedical and mechanical engineering. The book provides an essential reference or textbook for graduates following a course in smart sensors, actuators and systems.

Download or read book Launch vehicle Dynamics written by Harry L. Runyan and published by . This book was released on 1961 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design for Additive Manufacturing written by Martin Leary and published by Elsevier. This book was released on 2019-12-03 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. - Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies - Provides systematic methods for optimizing AM process selection for specific production requirement - Addresses design tools for both metallic and polymeric AM technologies - Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors