Download or read book 2019 56th ACM IEEE Design Automation Conference DAC written by IEEE Staff and published by . This book was released on 2019-06-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: EDA (Electronics Design Automation) is becoming ever more important with the continuous scaling of semiconductor devices and the growing complexities of their use in circuits and systems Demands for lower power, higher reliability and more agile electronic systems raise new challenges to both design and design automation of such systems For the past five decades, the primary focus of research track at DAC has been to showcase leading edge research and practice in tools and methodologies for the design of circuits and systems

Download or read book Processing in Memory for AI written by Joo-Young Kim and published by Springer Nature. This book was released on 2022-07-09 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to processing-in-memory (PIM) technology, from its architectures to circuits implementations on multiple memory types and describes how it can be a viable computer architecture in the era of AI and big data. The authors summarize the challenges of AI hardware systems, processing-in-memory (PIM) constraints and approaches to derive system-level requirements for a practical and feasible PIM solution. The presentation focuses on feasible PIM solutions that can be implemented and used in real systems, including architectures, circuits, and implementation cases for each major memory type (SRAM, DRAM, and ReRAM).

Download or read book Proceedings of the 23rd ACM IEEE Design Automation Conference written by Don Thomas and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Algorithms for Physical Design Automation written by Charles J. Alpert and published by CRC Press. This book was released on 2008-11-12 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical design flow of any project depends upon the size of the design, the technology, the number of designers, the clock frequency, and the time to do the design. As technology advances and design-styles change, physical design flows are constantly reinvented as traditional phases are removed and new ones are added to accommodate changes in technology. Handbook of Algorithms for Physical Design Automation provides a detailed overview of VLSI physical design automation, emphasizing state-of-the-art techniques, trends and improvements that have emerged during the previous decade. After a brief introduction to the modern physical design problem, basic algorithmic techniques, and partitioning, the book discusses significant advances in floorplanning representations and describes recent formulations of the floorplanning problem. The text also addresses issues of placement, net layout and optimization, routing multiple signal nets, manufacturability, physical synthesis, special nets, and designing for specialized technologies. It includes a personal perspective from Ralph Otten as he looks back on the major technical milestones in the history of physical design automation. Although several books on this topic are currently available, most are either too broad or out of date. Alternatively, proceedings and journal articles are valuable resources for researchers in this area, but the material is widely dispersed in the literature. This handbook pulls together a broad variety of perspectives on the most challenging problems in the field, and focuses on emerging problems and research results.

Download or read book 2017 54th ACM EDAC IEEE Design Automation Conference DAC written by ACM/IEEE Design Automation Conference and published by . This book was released on 2017-06-18 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world s premier EDA and semiconductor design conference and exhibition DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities

Download or read book From Specification to Embedded Systems Application written by Achim Rettberg and published by Springer. This book was released on 2005-09-28 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: As almost no other technology, embedded systems is an essential element of many innovations in automotive engineering. New functions and improvements of already existing functions, as well as the compliance with traffic regulations and customer requirements, have only become possible by the increasing use of electronic systems, especially in the fields of driving, safety, reliability, and functionality. Along with the functionalities that increase in number and have to cooperate, the complexity of the entire system will increase. Synergy effects resulting from distributed application functionalities via several electronic control devies, exchanging information through the network brings about more complex system architectures with many different sub-networks, operating with different velocities and different protocol implementations. To manage the increasing complexity of these systems, a deterministic behaviour of the control units and the communication network must be provided for, in particular when dealing with a distributed functionality. From Specification to Embedded Systems Application documents recent approaches and results presented at the International Embedded Systems Symposium (IESS 2005), which was held in August 2005 in Manaus (Brazil) and sponsored by the International Federation for Information Processing (IFIP). The topics which have been chosen for this working conference are very timely: design methodology, modeling, specification, software synthesis, power management, formal verification, testing, network, communication systems, distributed control systems, resource management and special aspects in system design.

Download or read book Design of Systems on a Chip Design and Test written by Ricardo Reis and published by Springer Science & Business Media. This book was released on 2007-05-06 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second of two volumes addressing the design challenges associated with new generations of semiconductor technology. The various chapters are compiled from tutorials presented at workshops in recent years by prominent authors from all over the world. Technology, productivity and quality are the main aspects under consideration to establish the major requirements for the design and test of upcoming systems on a chip.

Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.

Download or read book Database Systems For Advanced Applications 91 Proceedings Of The 2nd International Symposium On Database Systems For Advanced Applications written by Akifumi Makinouchi and published by World Scientific. This book was released on 1992-09-21 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 64 papers from contributors around the world on a wide range of topics in database systems research. Of special mention are the papers describing the practical experiences of developing and implementing some of the many useful database systems on the market. Readers should find useful new ideas from the proceedings of this international symposium.

Download or read book Green Energy Efficient and Sustainable Networks written by Josip Lorincz and published by MDPI. This book was released on 2020-01-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Green, Energy-Efficient and Sustainable Networks provides insights and solutions for a range of problems in the field of obtaining greener, energy-efficient, and sustainable networks. The book contains the outcomes of the Special Issue on “Green, Energy-Efficient and Sustainable Networks” of the Sensors journal. Seventeen high-quality papers published in the Special Issue have been collected and reproduced in this book, demonstrating significant achievements in the field. Among the published papers, one paper is an editorial and one is a review, while the remaining 15 works are research articles. The published papers are self-contained peer-reviewed scientific works that are authored by more than 75 different contributors with both academic and industry backgrounds. The editorial paper gives an introduction to the problem of information and communication technology (ICT) energy consumption and greenhouse gas emissions, presenting the state of the art and future trends in terms of improving the energy-efficiency of wireless networks and data centers, as the major energy consumers in the ICT sector. In addition, the published articles aim to improve energy efficiency in the fields of software-defined networking, Internet of things, machine learning, authentication, energy harvesting, wireless relay systems, routing metrics, wireless sensor networks, device-to-device communications, heterogeneous wireless networks, and image sensing. The last paper is a review that gives a detailed overview of energy-efficiency improvements and methods for the implementation of fifth-generation networks and beyond. This book can serve as a source of information in industrial, teaching, and/or research and development activities. The book is a valuable source of information, since it presents recent advances in different fields related to greening and improving the energy-efficiency and sustainability of those ICTs particularly addressed in this book

Download or read book Computing Analytics and Networks written by Rajnish Sharma and published by Springer. This book was released on 2018-07-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the revised selected papers from the First International Conference on Computing, Analytics and Networks, ICAN 2017, held in Rajpura, India, in October 2017. The 20 revised full papers presented in this volume were carefully reviewed and selected from 56 submissions. They are organized in topical sections on Mobile Cloud Computing; Big Data Analytics; Secure Networks. Five papers in this book are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. For further details, please see the copyright page.

Download or read book High Level Synthesis for Real Time Digital Signal Processing written by Jan Vanhoof and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Level Synthesis for Real-Time Digital Signal Processing is a comprehensive reference work for researchers and practicing ASIC design engineers. It focuses on methods for compiling complex, low to medium throughput DSP system, and on the implementation of these methods in the CATHEDRAL-II compiler. The emergence of independent silicon foundries, the reduced price of silicon real estate and the shortened processing turn-around time bring silicon technology within reach of system houses. Even for low volumes, digital systems on application-specific integrated circuits (ASICs) are becoming an economically meaningful alternative for traditional boards with analogue and digital commodity chips. ASICs cover the application region where inefficiencies inherent to general-purpose components cannot be tolerated. However, full-custom handcrafted ASIC design is often not affordable in this competitive market. Long design times, a high development cost for a low production volume, the lack of silicon designers and the lack of suited design facilities are inherent difficulties to manual full-custom chip design. To overcome these drawbacks, complex systems have to be integrated in ASICs much faster and without losing too much efficiency in silicon area and operation speed compared to handcrafted chips. The gap between system design and silicon design can only be bridged by new design (CAD). The idea of a silicon compiler, translating a behavioural system specification directly into silicon, was born from the awareness that the ability to fabricate chips is indeed outrunning the ability to design them. At this moment, CAD is one order of magnitude behind schedule. Conceptual CAD is the keyword to mastering the design complexity in ASIC design and the topic of this book.

Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Download or read book The VLSI Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2019-07-17 with total page 1788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years, the fundamentals of VLSI technology have evolved to include a wide range of topics and a broad range of practices. To encompass such a vast amount of knowledge, The VLSI Handbook focuses on the key concepts, models, and equations that enable the electrical engineer to analyze, design, and predict the behavior of very large-scale integrated circuits. It provides the most up-to-date information on IC technology you can find. Using frequent examples, the Handbook stresses the fundamental theory behind professional applications. Focusing not only on the traditional design methods, it contains all relevant sources of information and tools to assist you in performing your job. This includes software, databases, standards, seminars, conferences and more. The VLSI Handbook answers all your needs in one comprehensive volume at a level that will enlighten and refresh the knowledge of experienced engineers and educate the novice. This one-source reference keeps you current on new techniques and procedures and serves as a review for standard practice. It will be your first choice when looking for a solution.

Download or read book 2018 IEEE ACM International Conference on Computer Aided Design ICCAD written by IEEE Staff and published by . This book was released on 2018-11-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ICCAD serves EDA and design professionals, highlighting new challenges and innovative solutions for integrated circuit design technology and systems

Download or read book High Level VLSI Synthesis written by Raul Camposano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The time has come for high-level synthesis. When research into synthesizing hardware from abstract, program-like de scriptions started in the early 1970' s, there was no automated path from the register transfer design produced by high-level synthesis to a complete hardware imple mentation. As a result, it was very difficult to measure the effectiveness of high level synthesis methods; it was also hard to justify to users the need to automate architecture design when low-level design had to be completed manually. Today's more mature CAD techniques help close the gap between an automat ically synthesized design and a manufacturable design. Market pressures encour age designers to make use of any and all automated tools. Layout synthesis, logic synthesis, and specialized datapath generators make it feasible to quickly imple ment a register-transfer design in silicon,leaving designers more time to consider architectural improvements. As IC design becomes more automated, customers are increasing their demands; today's leading edge designers using logic synthesis systems are training themselves to be tomorrow's consumers of high-level synthe sis systems. The need for very fast turnaround, a competitive fabrication market WhlCh makes small-quantity ASIC manufacturing possible, and the ever growing co:n plexity of the systems being designed, all make higher-level design automaton inevitable.

Download or read book Local Search in Combinatorial Optimization written by Emile Aarts and published by Princeton University Press. This book was released on 2018-06-05 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past three decades, local search has grown from a simple heuristic idea into a mature field of research in combinatorial optimization that is attracting ever-increasing attention. Local search is still the method of choice for NP-hard problems as it provides a robust approach for obtaining high-quality solutions to problems of a realistic size in reasonable time. Local Search in Combinatorial Optimization covers local search and its variants from both a theoretical and practical point of view, each topic discussed by a leading authority. This book is an important reference and invaluable source of inspiration for students and researchers in discrete mathematics, computer science, operations research, industrial engineering, and management science. In addition to the editors, the contributors are Mihalis Yannakakis, Craig A. Tovey, Jan H. M. Korst, Peter J. M. van Laarhoven, Alain Hertz, Eric Taillard, Dominique de Werra, Heinz Mühlenbein, Carsten Peterson, Bo Söderberg, David S. Johnson, Lyle A. McGeoch, Michel Gendreau, Gilbert Laporte, Jean-Yves Potvin, Gerard A. P. Kindervater, Martin W. P. Savelsbergh, Edward J. Anderson, Celia A. Glass, Chris N. Potts, C. L. Liu, Peichen Pan, Iiro Honkala, and Patric R. J. Östergård.